Pro Value Transitions 128mm pull describes this Pro Value Series Transitions collection handle with a 5-1/16 inch (128 mm) center to center hole spacing, so it lines up with standard drilling patterns on many cabinet doors and drawers. The 5-1/2 inch overall length gives a little extra grab area beyond the screw centers, which helps when opening heavier or wider fronts. Its zinc construction forms a solid base material for everyday cabinet use in residential or shop environments. The oil rubbed bronze finish provides a dark, traditional look that coordinates with similar bronze hinges or other visible decorative hardware. A 15/32 inch width across the pull keeps the profile slim while still offering enough surface to grip comfortably. The 1-3/16 inch projection brings the handle off the face of the cabinet to create finger clearance during operation.
The 5-1/16 inch (128 mm) center to center dimension on this pull gives installers a clear drilling layout, which simplifies jig setup and repeat work across multiple fronts. A 1-3/16 inch projection provides predictable stand-off from the cabinet surface, allowing fingers to wrap behind the pull without contact against the door or drawer face. The 15/32 inch width and 15/32 inch base diameter keep each contact point compact, which is useful on narrow rails where space is limited. The specified 8-32 x 1 inch screw size defines the mounting thread and length, aligning with common cabinet construction thicknesses when fastening from the back.
This oil rubbed bronze cabinet pull from the Pro Value Series Transitions collection is designed for use on cabinet doors and drawer fronts that suit a 5-1/16 inch (128 mm) center to center layout. The 5-1/2 inch overall length makes it a practical size for many base cabinets and wall cabinets, creating an even look when repeated along a run. Its zinc construction supports daily use in typical woodworking and cabinet environments where metal handles are standard. The 1-3/16 inch projection sets a consistent distance off the face, so doors and drawers across a project present the same shadow line. The 15/32 inch base diameter at each end provides a clean transition from the cabinet face to the pull, offering enough coverage over the drilled holes while remaining visually light.
The defined 5-1/16 inch (128 mm) center to center spacing on this SZTR10-ORB cabinet handle allows installers to use boring jigs or CNC programs built around that metric pattern, saving layout time on repetitive work. Because the overall length is 5-1/2 inches, there is only a modest overhang beyond the screw centers, which helps keep the handle centered on narrower drawer fronts without extending too close to the edges. The 15/32 inch width helps maintain consistent reveal distances when aligning multiple pulls along a rail, especially on face frames with limited stile width. The 1-3/16 inch projection ensures knuckles clear raised panels or applied moldings during operation, supporting smooth use on doors with varying profiles. The specified 8-32 x 1 inch screw requirement matches common cabinet joinery practice, so the pull fastens securely through typical door and drawer thicknesses.
This pull uses a 5-1/16 inch (128 mm) center to center dimension, which sets the hole spacing for drilling jigs and helps align multiple handles across cabinet runs.
The pull length is 5-1/2 inches, providing slightly more bar length than the hole spacing so it sits proportionally on medium-width doors and drawer fronts.
This cabinet pull is made from zinc, giving it a metal body suited to everyday cabinet door and drawer use in woodworking projects.
The handle projection is 1-3/16 inches, creating space between the cabinet face and the pull so fingers can easily grip from behind.
The pull has a 15/32 inch width and a 15/32 inch base diameter, giving a slim profile while still covering the mounting holes on rails and stiles.
This Transitions collection pull uses 8-32 x 1 inch screws, so it fastens through typical cabinet door and drawer thicknesses using a standard thread.
The Pro Value Transitions 128mm pull in oil rubbed bronze combines a 5-1/16 inch (128 mm) center to center layout with a 5-1/2 inch length, giving cabinetmakers a straightforward option for consistent drilling and visual alignment. Its zinc construction and 1-3/16 inch projection support daily operation on doors and drawers that need reliable gripping space. The 15/32 inch width and base diameter keep the profile compact for use on a variety of face designs. For projects calling for a dark bronze finish and a 128 mm pattern, this SZTR10-ORB pull offers a defined set of measurements that integrate smoothly into cabinet workflows.
Sold In: 1 Each