Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitions 2.0 128mm satin nickel pull from the Pro Value Series gives cabinet doors and drawers a consistent 5-1/16 inch center to center mounting, which helps line up multiple pulls across banks of cabinets. The pull length of 5-3/8 inch spans wider rail sections, so the hand lands solidly on the hardware instead of the wood face. A projection of 1-7/32 inch stands the grip off the surface, creating space for fingers to clear door edges. The satin nickel finish presents a subdued metallic look that works in many shop-built kitchen, bath, or casework projects where glare is unwanted. Zinc material in the body provides a stable base for the finish, supporting everyday cabinet use. The 25/32 inch base diameter transitions the grip to the door or drawer front with a defined footprint, which helps cover previous imprint marks when replacing existing pulls.
The 5-1/16 inch center to center measurement sets the distance between mounting holes, so jigs and drilling guides can be set once and used across all doors and drawers. With an overall length of 5-3/8 inch, the pull slightly overhangs the hole spread, leaving visible metal past each fastener point for a balanced look. The 1-7/32 inch projection defines how far the grip stands off the surface, providing reliable clearance on standard cabinet face frames and slab doors. At 1/2 inch width, the pull keeps a narrow profile, which helps when placing hardware close to door edges or on narrow drawer fronts. The 25/32 inch base diameter at each end sets a round footprint that seats against the front, creating a clear visual target for hole positioning during layout.
This Pro Value Series Transitions 2.0 pull fits cabinet and drawer layouts built around a 128 mm center to center standard, so it suits many new shop builds that follow metric drilling patterns. The satin nickel finish supports use in kitchens, baths, and utility rooms where a muted, brushed appearance is preferred over bright polish. With a 5-3/8 inch length, the pull works on both base and wall cabinets, giving enough span on wider drawer fronts without overpowering narrower doors. The 1-7/32 inch projection and 1/2 inch width make this pull appropriate for frameless or face-frame cabinets, because the grip stands clear of the surface while still looking streamlined. The 25/32 inch base diameter helps visually anchor the pull on stile-and-rail doors and flat drawer fronts, so the hardware sits proportionally on common cabinet dimensions.
The 5-1/16 inch (128 mm) center to center dimension is a key detail for repeatable results, because it allows installers to use standard 128 mm drilling templates to speed through large jobs. A consistent 5-3/8 inch overall length keeps each pull visually aligned when doors and drawers are ganged together in long runs, reducing visual drift between openings. The 1-7/32 inch projection establishes a predictable hand clearance, so door and drawer operation feels the same across an entire bank of cabinets. With a slim 1/2 inch width, the pull lets installers position hardware closer to panel edges when design calls for a tighter reveal, while still giving users a solid pinch point. The 25/32 inch base diameter at each end works as a visual alignment cue, helping hardware lines stay straight relative to cabinet rails, which reduces rework on finished pieces.
The Transitions 2.0 pull has a 5-1/16 inch (128 mm) center to center, so hole spacing follows a common metric standard for cabinet hardware layouts.
The Pro Value Series SZTR11-SN pull is 5-3/8 inch long, which extends slightly beyond the mounting holes to give a full-length grip on cabinet fronts.
The SZTR11-SN pull projects 1-7/32 inch from the cabinet surface, creating finger clearance between the hardware and doors or drawers during operation.
The Transitions 2.0 pull is made from zinc with a satin nickel finish, combining a stable base material with a muted metallic look for cabinetry.
The pull has a width of 1/2 inch, offering a slim profile that still provides enough surface to grasp on cabinet doors and drawers.
The 25/32 inch base diameter defines the round footprint where the pull meets the cabinet, helping cover prior marks and giving a defined seating area.
The Pro Value Series Transitions 2.0 satin nickel pull with 5-1/16 inch (128 mm) center to center spacing brings predictable drilling and alignment to cabinet runs. With a 5-3/8 inch length, 1-7/32 inch projection, 1/2 inch width, and 25/32 inch base diameter, the SZTR11-SN model supports clean, repeatable layouts across doors and drawers. For projects built around a 128 mm standard and a satin nickel finish, this zinc pull offers a straightforward way to coordinate looks and dimensions across the entire installation.
Sold In: 1 Each