Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions Series pull gives you a 5-1/16 inch (128 mm) center to center handle that sets hole spacing for straightforward cabinet or drawer layouts. This defined mounting distance helps line up drilling patterns across multiple fronts. The pull is part of the Transitions 2.0 collection, so it matches other pieces in the same family when a consistent look is needed across a kitchen, bath, or shop project. Its overall 5-3/8 inch length gives enough hand clearance for comfortable gripping while still working on narrower drawer faces.
The pull uses a zinc material, which provides a solid metal body for everyday use on active cabinets and drawers. An oil rubbed bronze finish gives the handle a dark, traditional look that pairs well with many stained woods and darker painted finishes. Projection of 1-7/32 inch and a 1/2 inch width define how far the pull stands off the face and how it feels in the hand during repeated use.
This Transitions 2.0 pull is built around a 5-1/16 inch (128 mm) center to center measurement, giving a clear distance to follow when laying out drill points on doors and drawers. That metric spacing aligns with many jigs designed for 128 mm pulls. The base diameter of 25/32 inch at each end shows how much surface area contacts the cabinet, which matters when covering prior hardware impressions. With a projection of 1-7/32 inch, the pull stands off enough to get fingers behind it while still staying close to the cabinet face for a trim profile along aligned drawer banks.
The 1/2 inch width sets the narrow dimension of the grip, which influences how the pull feels between the fingers when you open and close cabinets repeatedly. Supplied 8-32 x 1 inch screws tie into typical cabinet construction thicknesses, so the threaded connection suits many standard door and drawer fronts. The overall 5-3/8 inch length defines the visual span of the handle against face frames and slab fronts, supporting proportional placement on medium-width fronts.
The SZTR11-ORB pull from the Pro Value Series fits cabinet and drawer layouts that use the 128 mm center to center standard, which is common in many modern kitchen and bath designs. That fixed spacing helps when matching existing drilling or aligning new runs of doors and drawers. The oil rubbed bronze finish supports projects that already use bronze-finished hinges or matching decorative hardware, helping keep a unified appearance across upper and lower cabinets.
With a 5-3/8 inch overall length, this pull suits mid-size drawer fronts and cabinet doors where a smaller knob might feel undersized. The 1-7/32 inch projection defines the clearance behind the pull, so it functions well on cabinets near walls or appliances where extra protrusion could interfere. A 25/32 inch base diameter gives enough coverage to sit cleanly on face frames or full-overlay doors without overwhelming narrower rails.
The 5-1/16 inch (128 mm) center to center dimension allows installers to use metric or imperial jigs designed for 128 mm hardware, which speeds repetitive drilling on large kitchens or multi-unit projects. That consistent spacing also simplifies replacements when trading out older pulls that share the same mounting distance. Zinc construction gives each pull a solid feel during operation, which matters when drawers are loaded and opened frequently.
The 1/2 inch width and 1-7/32 inch projection define the hand contact area and stand-off, which affect comfort over long-term use. These dimensions help provide enough grip without crowding adjacent hardware on closely spaced fronts. Oil rubbed bronze finish ties the pull into other bronze elements on the job, so hinges, knobs, and pulls from the same color family read as one coordinated set. The 8-32 x 1 inch screw size matches a standard thread pattern, which supports straightforward installation with common cabinet drilling practices.
The SZTR11-ORB pull has a 5-1/16 inch (128 mm) center to center distance, which sets the exact hole spacing for drilling or matching existing cabinet hardware layouts.
The pull length is 5-3/8 inch, so it extends slightly beyond the mounting holes, helping balance the look on doors and drawers and cover small surface marks near the holes.
The Transitions 2.0 pull uses zinc with an oil rubbed bronze finish, giving a metal body with a dark, bronze-toned surface that coordinates with similar bronze hardware.
The pull projection is 1-7/32 inch, which sets the stand-off from the cabinet surface and provides finger clearance behind the handle during everyday opening and closing.
The pull uses 8-32 x 1 inch screws, so the threaded connection follows a common cabinet hardware standard suited to typical door and drawer front thicknesses.
The base diameter is 25/32 inch and the width is 1/2 inch, which define the footprint at each end and the gripping surface across the handle.
The Pro Value Transitions Series pull with 5-1/16 inch (128 mm) center to center spacing, zinc construction, and oil rubbed bronze finish brings a defined standard to cabinet hardware layouts. Its 5-3/8 inch overall length, 1-7/32 inch projection, and 1/2 inch width create a practical balance between grip comfort and clean lines on doors and drawers. Using the SZTR11-ORB pull across a project keeps hole spacing, finish, and proportions consistent from cabinet to cabinet, supporting efficient installation and a unified look.
Sold In: 1 Each