Transitions 2.0 128mm polished chrome pull from the Pro Value Series is a zinc cabinet handle designed for jobs needing a 5-1/16 inch (128 mm) center-to-center layout. That fixed drilling dimension lets installers line up with common cabinet and drawer boring patterns, which speeds layout across a full run. The polished chrome finish provides a bright, reflective look that suits modern and transitional cabinetry where a clean metal appearance is required. The pull body is made from zinc, giving a solid metal feel during operation on doors and drawers in everyday use. A 5-3/8 inch overall length gives the pull a little overhang past the screw centers, which helps cover minor drilling flaws along the line. The Pro Value Series branding and SZTR11-PC part number allow straightforward reordering when matching existing hardware on future phases.
This Pro Value Series cabinet pull is specified with a 5-1/16 inch (128 mm) center-to-center dimension, which defines the distance between the mounting holes and guides drilling on new fronts. A 25/32 inch base diameter at each end sets the bearing surface against the door or drawer, which matters when covering existing marks or impressions around former hardware. With a 1-7/32 inch projection off the surface, the pull extends far enough to clear typical door and drawer edge profiles while limiting snag potential in tight kitchen or shop layouts. The nominal 5-3/8 inch length defines the full span of the handle, which helps plan spacing from panel edges, neighboring pulls, or appliances in detailed layouts.
The Pro Value Series Transitions 2.0 pull with a 5-1/16 inch (128 mm) center-to-center layout works on cabinet doors and drawers drilled to that metric pattern, which is common in many framed and frameless lines. Its 5-3/8 inch overall length lets it sit proportionally on standard-width kitchen drawers and doors, so a bank of hardware reads consistently across upper and lower runs. The 25/32 inch base diameter seats against the face of the cabinet, helping the pull visually anchor on both narrow rails and wider drawer fronts. With a 1/2 inch width and 1-7/32 inch projection, the handle provides fingertip purchase without dominating narrower fronts, supporting use on vanities, utility cabinets, and built-ins where hardware scale matters.
The defined 5-1/16 inch (128 mm) center-to-center dimension on the SZTR11-PC pull supports repeatable drilling when using jigs set to that spacing, which reduces layout time across large cabinet runs. The zinc construction gives the pull a consistent weight and feel from piece to piece, which helps maintain a uniform user experience when many doors and drawers are outfitted in one space. The polished chrome finish is specified as the surface treatment, so a series of these pulls will present a matched sheen from one opening to the next. The 25/32 inch base diameter provides a predictable footprint, which helps cover minor chipping around drilled holes as pulls are swapped or repositioned. Together, these fixed dimensions help installers maintain consistent alignment, appearance, and hand clearance across multiple cabinets without custom adjustments.
The Transitions 2.0 pull has a 5-1/16 inch (128 mm) center-to-center dimension, which sets the hole spacing for mounting on cabinet doors and drawers.
The SZTR11-PC pull length is specified at 5-3/8 inches, which defines the overall span to plan placement on doors and drawer fronts.
This cabinet pull is made from zinc, providing a solid metal body for operating cabinet doors and drawers in everyday use.
This handle has a 1-7/32 inch projection, giving hand clearance off the cabinet surface while limiting how far the pull extends into the room.
The Pro Value Series SZTR11-PC pull has a polished chrome finish, creating a bright, reflective appearance on cabinet doors and drawers.
This pull has a 25/32 inch base diameter and a 1/2 inch width, which define the footprint on the cabinet face and the slim front profile.
The Transitions 2.0 128mm polished chrome pull from the Pro Value Series combines a 5-1/16 inch center-to-center layout, 5-3/8 inch length, and zinc construction into a consistent cabinet handle solution. Those fixed dimensions and the polished chrome finish let installers match drilling patterns and visual style across doors and drawers using part number SZTR11-PC on current work and follow-up projects.
Sold In: 1 Each