Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions II pull is a satin nickel handle designed for cabinets and drawers where a consistent look across runs of fronts matters. The pull is part of the Transitions 2.0 collection, so it aligns with that specific style family for coordinated layouts. The zinc material provides a solid metal construction, which supports everyday opening and closing in kitchen, bath, or shop cabinetry. The 5-1/16 inch (128 mm) center to center drilling sets a common hole pattern, helping align this pull with many standard cabinet layouts using that spacing. Overall length of 5-9/16 inches gives fingers clear room between posts, which helps when users have larger hands or when fronts sit close to adjacent walls or appliances. Satin nickel finish brings a muted metallic look that reduces glare and fits well with many hinge and faucet finishes that share this tone.
This satin nickel cabinet pull uses a 5-1/16 inch (128 mm) center to center hole pattern, so layout starts from that fixed drilling distance on each door or drawer front. With a 5-9/16 inch overall length, the handle extends slightly beyond the screw points, which helps visually center the grip on wider rails and stiles. The projection of 29/32 inch keeps the pull comfortably off the surface, giving enough depth for a firm grip without reaching too far into the room. A base diameter of 1/2 inch at each mounting post provides a defined footprint for contact with the panel, supporting stable fastening around the screw holes. The 8-32 x 1 inch screws engage standard cabinet drilling thicknesses, which supports a predictable fastening feel when tightening each pull into place.
This Pro Value Series cabinet pull is part of the Transitions 2.0 collection, so it fits projects built around that coordinated hardware line. The satin nickel finish matches other satin nickel components, helping maintain a unified look across doors, drawers, and moldings where finishes need to stay consistent. Its 5-1/16 inch (128 mm) center to center size suits cabinets designed around that common drilling pattern, supporting straightforward replacement of similar-sized handles sharing the same spacing. At 5-9/16 inches overall length, the pull works well on both base cabinets and wall cabinets, providing enough handle span for heavier drawers while still looking proportionate on smaller doors. The zinc construction supports use in residential or shop cabinetry where metal pulls are preferred over non-metal options. With a projection just under 1 inch, the handle works in narrow galley layouts or utility spaces where extra clearance from fronts needs to stay controlled.
The 5-1/16 inch (128 mm) center to center measurement is critical for repeat drilling, since it sets the exact distance your jigs or boring equipment must follow from one mounting hole to the other. The 5-9/16 inch total length then defines how far the pull visually reaches beyond those holes, which helps installers align handles consistently relative to panel edges or rail widths. A 19/32 inch width gives a predictable bar thickness, so users feel the same grip from door to door, supporting consistent ergonomics across the entire run of cabinetry. The 29/32 inch projection establishes a fixed stand-off from the face, which helps designers plan clearances near adjacent doors, appliances, or tall end panels. Base diameter of 1/2 inch at each post marks a clear seating area on the surface, making it easier to spot alignment issues during layout. The 8-32 x 1 inch screw specification lets installers standardize drill bit selection for pilot holes, which supports efficient workflow when mounting many SZTR12-SN pulls on a single job.
This SZTR12-SN cabinet pull uses a 5-1/16 inch (128 mm) center to center drilling pattern, which sets the exact distance between the two mounting holes on the door or drawer front.
The Pro Value Transitions II pull has a 5-9/16 inch overall length, so it extends slightly beyond the mounting holes and offers a comfortable gripping area on cabinet doors and drawers.
This cabinet pull is made from zinc with a satin nickel finish, providing metal construction with a muted metallic appearance that coordinates with satin nickel hinges and fixtures.
This satin nickel cabinet pull projects 29/32 inch off the cabinet face, giving fingers room behind the handle while keeping the pull close to the door to limit snag points.
This Pro Value Series cabinet pull uses 8-32 x 1 inch screws, matching a common cabinet thread size that works with standard drilling practices in cabinet shops.
The Transitions 2.0 cabinet pull has a width of 19/32 inch, giving a defined grip surface that feels substantial while staying visually slim on cabinet fronts.
This satin nickel SZTR12-SN cabinet pull combines a 5-1/16 inch (128 mm) center to center drilling pattern with a 5-9/16 inch overall length, aligning well with cabinets planned around that standard spacing. The zinc construction and satin nickel finish tie into the Transitions 2.0 collection, helping maintain consistent hardware styling across your project. When a job calls for a Pro Value Transitions II pull in this specific size and finish, this model from Wurth Baer Supply delivers the defined dimensions and screw specification needed for repeatable cabinet installations.
Sold In: 1 Each