Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions Series pull gives you a practical zinc handle with an oil rubbed bronze finish, so cabinets and drawers get a coordinated look that stays consistent across a project. The 5-1/16 inch (128 mm) center to center dimension sets a clear drilling layout, which helps align multiple doors and drawers on a run. Overall 5-9/16 inch length provides hand space across typical cabinet fronts, which supports everyday use in kitchens, baths, or shop cabinetry. The 29/32 inch projection stands the pull off the face enough for a firm grip, which matters when doors are loaded or heavy. A 19/32 inch width keeps the profile lean, so fronts stay visually clean while still giving finger contact. The 1/2 inch base diameter defines the footprint at each mounting point, which helps when planning around panel edges or narrow rails.
The 5-1/16 inch (128 mm) center to center spacing gives a precise measurement for boring, which suits drill jigs and CNC patterns set to 128 mm systems. Overall 5-9/16 inch length keeps the pull close to the mounting span, which helps it sit neatly on smaller doors or drawer fronts without overhang looking oversized. A 1/2 inch base diameter at each mounting point defines the flat contact area, which guides where to position the pull relative to panel edges or rail widths. With 29/32 inch projection, the handle stands off enough to clear typical door edge profiles, which supports clean operation even on thicker fronts. The 19/32 inch width keeps the footprint modest, which helps when aligning multiple pulls in tight reveals on built-ins or banks of drawers.
This SZTR12-ORB pull from the Pro Value Transitions 2.0 collection, with 5-1/16 inch (128 mm) center to center spacing, fits projects built around common metric drilling patterns, which is useful on frameless or European-style cabinet layouts. The oil rubbed bronze finish ties in with other bronze components, which helps when tying pulls to hinges, knobs, or decorative hardware in the same tone. With a 5-9/16 inch overall length, the pull works well on standard cabinet doors and medium-width drawers, which keeps proportions balanced without dominating smaller fronts. The 29/32 inch projection supports a full three-finger grip, which matters on pantry doors or heavier drawer boxes. Zinc construction gives the pull a metal foundation under the finish, which supports regular use in residential or light commercial cabinets. The 1/2 inch base diameter and 19/32 inch width let the pull sit comfortably on narrow rails, which is helpful on smaller doors where space is limited.
The defined 128 mm center to center spacing lets installers use standard drilling jigs, which reduces layout time when repeating the same pull across a full kitchen or bank of casework. Having 5-9/16 inch length closely match the hole span simplifies visual alignment, which helps keep hardware runs straight along upper and lower cabinets. The 1/2 inch base diameter gives a clear circular reference at each end, which aids in checking that each pull is square to door edges before tightening. A 19/32 inch width and 29/32 inch projection together create a consistent standoff profile, which keeps hand clearance similar from cabinet to cabinet for a uniform user feel. Using 8-32 x 1 inch screws as the mounting method aligns with a standard cabinet fastener size, which supports a predictable drilling diameter and thread engagement. The oil rubbed bronze finish across the zinc base maintains a uniform appearance, which helps finished cabinetry present as a coordinated installation.
The Pro Value Transitions Series pull has a 5-1/16 inch (128 mm) center to center, which sets a consistent hole spacing for drilling jigs and cabinet layout.
The SZTR12-ORB pull measures 5-9/16 inches in overall length, which keeps the handle proportionate on typical cabinet doors and drawer fronts.
The pull is made from zinc with an oil rubbed bronze finish, which provides a metal base with a dark bronze appearance to match similar hardware.
This cabinet pull projects 29/32 inch from the mounting surface, which offers finger clearance and a comfortable grip on doors and drawers.
The pull uses 8-32 x 1 inch screws, which matches a common cabinet mounting thread for securing handles to doors and drawer fronts.
The pull has a 19/32 inch width and 1/2 inch base diameter, which keeps the footprint compact for narrow rails and closely spaced fronts.
The Pro Value Transitions Series pull with 5-1/16 inch (128 mm) center to center and 5-9/16 inch overall length gives a clear drilling and layout standard for cabinet runs. Zinc construction with an oil rubbed bronze finish coordinates with bronze-tone projects, while the 29/32 inch projection and 19/32 inch width provide consistent hand clearance across doors and drawers. For jobs built around 128 mm spacing and an oil rubbed bronze look, this SZTR12-ORB pull from Wurth Baer Supply aligns dimensions and finish for straightforward cabinet hardware planning.
Sold In: 1 Each