Pro Value Transitions Series 5-1/16" (128 mm) Center to Center Polished Chrome Pull, - SZTR12-PC

Pro Value Transitions Series Pull For Cabinets

Pro Value Transitions Series pull gives you a 5-1/16 inch (128 mm) center to center layout, so hole spacing lines up with standard cabinet boring patterns. This matters when you are replacing existing pulls and want to avoid filling and redrilling. The pull measures 5-9/16 inch in overall length, so it visually covers the rail area around the mounting holes for a balanced look on doors and drawers. A projection of 29/32 inch stands the handle off the front, giving fingers clearance for a solid grip without feeling bulky on smaller faces. The 19/32 inch width provides a comfortable edge to pull against, which helps when opening heavier cabinet fronts. A base diameter of 1/2 inch keeps the foot small enough for tight rails while still spreading load at the mounting point. The polished chrome finish from the Transitions collection brings a bright, clean appearance that pairs with contemporary and transitional cabinet styles.

Key Transitions Pull Details That Support The Job

• The 5-1/16 inch (128 mm) center to center dimension matches a common drilling pattern, which simplifies layout on new builds and reduces steps when swapping out existing hardware.
• The 5-9/16 inch overall length slightly exceeds the hole spacing, so the pull overhangs the boring line and visually frames the mounting area for a more finished install.
• The 29/32 inch projection offsets the grip from the cabinet face, helping fingers clear the door surface and reducing contact marks around high-use drawers and doors.
• The 19/32 inch width and 1/2 inch base diameter create a compact profile, so the pull fits comfortably on narrower rails while still providing enough bearing surface at each mounting point.
• The zinc material with polished chrome finish delivers a bright, metal look that coordinates with other chrome fittings in the space, helping keep hardware finishes consistent across a project.
• The 8-32 x 1 inch screw size specification ties directly into standard cabinet hardware practice, so thread type and typical panel thickness expectations stay familiar during installation.

Installation Details For This 128 Mm Center Pull

This pull uses a 5-1/16 inch (128 mm) center to center dimension, so drilling or existing bores align on that spacing for both doors and drawers. That spacing is widely used in cabinet layouts, which helps streamline jig setup and repetitive drilling. The pull is designed around 8-32 x 1 inch screws, a standard combination for cabinet fronts that matches common shop hardware and tools. With a projection of 29/32 inch, the handle stands off enough that the installer gains finger clearance without the pull dominating narrow drawer fronts. The 1/2 inch base diameter concentrates the mounting footprint, which helps when working on face frames or narrow slab rails. Overall length at 5-9/16 inch provides slight overhang beyond the centers, which can help cover minor chipping around drilled holes on retrofit work.

How This Polished Chrome Pull Works In Practice

Where The Pro Value Transitions Series Pull Fits

This Pro Value Series cabinet pull from the Transitions collection is built around a 5-1/16 inch (128 mm) center to center measurement, so it fits layouts designed for that common spacing on kitchen, bath, or shop cabinets. The 5-9/16 inch overall length suits medium-width drawer fronts and doors, giving enough visual presence without crowding narrow stiles. A projection of 29/32 inch balances clearance and profile depth, so the pull works on both full-overlay and traditional face frame cabinets where space between adjacent fronts may be limited. The 19/32 inch width keeps the pull compact across its face, which is useful on smaller drawers where wide bars might overwhelm the panel. With a 1/2 inch base diameter, the feet sit comfortably on standard rails and edges, giving reliable contact on both flat slab and framed construction where reveal space can be tight.

Details That Support Consistent Cabinet Results

The 128 mm center to center specification on this SZTR12-PC pull lets installers repeat the same boring pattern across multiple runs, which speeds production and keeps alignment consistent from cabinet to cabinet. Using standard 8-32 x 1 inch screw sizing ties directly into typical cabinet shop inventory, so swapping or matching fasteners across a job stays straightforward. The projection of 29/32 inch helps keep hands clear of the cabinet surface, which can limit finish wear around high-touch areas over time. Width at 19/32 inch and base diameter at 1/2 inch work together to keep the pull visually proportional while distributing pull force at each mounting point, supporting everyday opening loads. The zinc construction with a polished chrome finish from the Transitions collection presents a bright metal surface, which lets the hardware coordinate with other chrome elements like faucets, hinges, or appliance trims in the same room.

Common Questions About This SZTR12-PC Cabinet Pull

Selecting This Pull For 128 Mm Cabinet Runs

This polished chrome cabinet pull from the Pro Value Transitions collection pairs a 5-1/16 inch (128 mm) center to center layout with a 5-9/16 inch overall length, so it suits common cabinet boring patterns. By choosing this SZTR12-PC pull, you match a standard 128 mm spacing, gain a 29/32 inch projection for everyday hand clearance, and work with a zinc construction in a bright polished chrome finish. For projects built around consistent drilling and coordinated chrome hardware, this Pro Value Series cabinet pull aligns cleanly with those requirements.