White coveralls disposable medium from Northern Safety are designed to provide a barrier from particulates, which helps keep dust and overspray off work clothes during maintenance and assembly tasks. The unique SMS fabric uses 3 layers of polypropylene, so the garment balances protection with breathability during longer jobs. The material wicks away perspiration by allowing air and water vapors to pass through, which supports comfort when working under warm lights or in confined areas. Elastic wrists and ankles help close off common entry points for airborne particles, keeping sleeves and legs closer to the body while you work. An attached hood extends that coverage to the head area, which is useful when working overhead or around drifting particulates. The generous fit and full-length 2-way zipper with cover flap support easy on and off over street clothes while maintaining consistent coverage during the job.
The generous fit of these Northern Safety coveralls allows them to go over standard work clothing, so crews can use them as a disposable outer layer without restricting movement. Elastic wrists and ankles help the garment sit securely at the cuffs, which supports cleaner transitions to gloves and footwear around dusty or sprayed areas. The attached hood adds continuous coverage from torso to head, simplifying how workers set up for glue and coatings spraying. A full-length 2-way zipper with a cover flap runs down the front, so the suit can be opened from the top or bottom to adjust access while the flap helps shield the zipper area from particulates. Sewn seams tie the panels together, supporting consistent coverage along the length of the arms, legs, and torso when people reach or crouch during maintenance and assembly work.
These Northern Safety white coveralls are classified as protective clothing within shop and safety supplies, so they fit naturally into general maintenance tasks where workers encounter airborne particulates. Primary applications include general maintenance in facilities where dust, debris, or light overspray can settle on garments during routine service. The coveralls are also identified for assembly applications, meaning they support cleaner workwear when workers handle components that shed dust or are sensitive to contamination from clothing fibers. Glue and coatings spraying is another primary application, so the coveralls serve as a disposable barrier layer when operators work with sprayed products that can drift or mist beyond the immediate target. The disposable nature of the garment allows it to be used as a temporary shield, then removed to help keep underlying clothing cleaner between work zones.
The unique SMS fabric, made of 3 layers of polypropylene, provides the barrier from particulates that defines the role of these coveralls, helping limit how much airborne material reaches clothing during maintenance or assembly work. Because the material wicks away perspiration by allowing air and water vapors to pass through, workers can stay more comfortable while wearing full-body coverage during glue and coatings spraying. Tear and abrasion resistant construction helps the garment tolerate contact with typical shop surfaces, so brushing against equipment or fixtures is less likely to compromise coverage. Elastic wrists and ankles tighten the openings at the limbs, helping the particulate barrier provided by the fabric extend right to the cuff line. The full-length 2-way zipper with cover flap lets workers open the suit from either direction while the flap maintains a covered front, supporting both mobility and continuous coverage. Sewn seams support structural integrity across panels, so the barrier from particulates extends through the joints of the garment during repeated bending and reaching. The coveralls are manufactured in an ISO 9002 Registered facility, which anchors product construction to a documented quality management system for consistent output across production runs.
The coveralls are a medium size with a generous fit and an attached hood, so they are intended to go over standard workwear while providing head-to-ankle coverage.
The elastic wrists and ankles draw the cuffs closer to the body, helping reduce particulate entry at sleeve and leg openings during maintenance or spraying work.
The unique SMS fabric uses 3 layers of polypropylene to provide a barrier from particulates while still allowing air and water vapors to pass, balancing protection and comfort.
The coveralls are specified for general maintenance, assembly applications, and glue and coatings spraying, so they fit into many shop and facility tasks involving airborne particulates.
The full-length 2-way zipper lets workers open the suit from top or bottom, while the cover flap helps keep the zipper area shielded from particulates during work.
The coveralls are manufactured in an ISO 9002 Registered facility, so production follows a documented quality management system for consistent garment construction.
The White coveralls disposable medium from Northern Safety combine an SMS 3-layer polypropylene barrier with a hood, elastic wrists, and elastic ankles, so they provide full-body particulate protection for general maintenance and assembly work. Tear and abrasion resistant construction supports daily use in shop environments where workers contact equipment and fixtures. The full-length 2-way zipper with cover flap and generous fit help crews get in and out efficiently between tasks while maintaining coverage. With primary applications in general maintenance, assembly applications, and glue and coatings spraying, these coveralls align with common shop and facility workflows. Choose this 19846 M model when a disposable outer layer is needed to help keep work clothing cleaner during particulate-heavy jobs.
Sold In: 1 Each