Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge hangs full overlay doors on both face-frame and frameless cabinets, with BLUMOTION soft-close built in and dowel mounting for CNC and production environments, finished in ONYX BLACK.
Dowel mounting is built for CNC shops and production runs where doors arrive with pre-bored 8mm dowel holes. The cup presses into those holes without cup screws, which cuts installation time per door and keeps a busy line moving. On the cabinet side, the hinge arm clips to a Blum base plate, which is a separate purchase matched to your cabinet construction and door position. The plate is brand-specific, so pair it with a Blum plate rather than one from another system.
ONYX BLACK is Blum's name for this finish, and it coordinates directly with dark pulls, drawer slides, and other hardware specified in the same finish family. Because the hinge is fully concealed when the door is closed, the finish only shows during installation and service, but it matters when a door is open: a dark hinge against a dark interior reads as intentional detail rather than a visible hardware break. The plated steel body carries the same BLUMOTION damping and three-way cam adjustment as the nickel version of this hinge. ONYX BLACK accessories for this line are not interchangeable with the nickel variants, so keep finish families consistent when specifying plates and accessories.
Cabinet shops running CNC equipment will find the dowel-mount format fits naturally into a boring-and-dowel workflow where screw-on cups would slow the line. Designers specifying dark hardware packages can close the finish loop at the hinge rather than leaving a chrome or nickel cup behind a dark door. The hinge suits standard doors in the 16 to 22mm range on either frameless or face-frame cabinets. For doors over 22mm, a thick-door hinge is the right pick. For installations without pre-bored dowel holes, the screw-on or INSERTA versions of this hinge in ONYX BLACK are the alternatives to consider.
Yes. The hinge arm clips to a base plate that mounts to the cabinet, and that plate is sold separately. Use a Blum plate matched to your cabinet type and the door position you need. Plates from other brands will not connect to this hinge.
The cup carries pre-attached dowels that press into bored holes in the door rather than fastening with screws. It is a CNC-friendly format that speeds up installation when doors are already bored on the machine.
No. ONYX BLACK plates and accessories are finish-matched to this line and are not interchangeable with nickel versions. Specify the full run in one finish to keep everything consistent.
Hinge count depends on door height and weight. As a general guide, doors up to about 40 inches tall use two hinges and taller doors use three or more. Check the Blum load table for your specific door dimensions and weight.
Specify this hinge when the hardware spec calls for ONYX BLACK, the workflow calls for dowel mounting, and the door needs to close quietly every time.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP175H3100-ONYX Mfr# 175H3100-ONYX | CLIP Cam Adjustable In-Line Mounting Plate, Onyx Black, Screw-On, 0mm | ||||
Sold in: 1 Each |  BP174H7100E-ONYX Mfr# 174H7100E-ONYX | CLIP Cam Adjustable Wing Mounting Plate, Onyx Black, Expando, 0mm | ||||
Sold in: 1 Each |  BP701503-ONYX Mfr# 701503-ONYX | CLIP Plain Hinge Straight Arm Cover Cap, Onyx Black | ||||
Sold in: 1 Each |  BP701553-ONYX Mfr# 701553-ONYX | CLIP Plain Hinge Straight Arm Cover Cap for Angled Mini/Glass Door, Onyx Black | ||||
Sold in: 1 Each |  BP70T3504-ONYX Mfr# 70T3504-ONYX | CLIP top 71B 110˚ Hinge Cup Cover Cap, Onyx Black | ||||
Sold in: 1 Each |  BP70T3553 Mfr# 70T3553 | Blum 86° Hinge Angle Restriction Clip Black 70T3553 |
