7" Recessed Flush Pull, Oil-Rubbed Bronze

7 Inch Recessed Flush Pull For Barn Doors

7 inch recessed flush pull is a solid brass pull from Quiet Glide, sized for barn door applications in rolling hardware systems. The pull is designed to be used with Quiet Glide's barn door hardware, so it aligns with that track system and keeps components in the same product family for consistent fit and appearance on the door slab. Overall height is 7 inches, which gives a tall gripping area that spreads hand contact over more surface and supports easier door operation on heavier panels. Overall width is 1-7/8 inches, so the pull occupies a narrow strip on the stile and leaves more uninterrupted face area for design or trim details. Depth is 7/16 inch, which keeps the pull recessed into the door and reduces how far it projects off the surface.

Key Barn Door Flush Pull Details In Practice

• The pull is designed to be used with Quiet Glide's barn door hardware, which keeps the handle and track components within the same system and supports straightforward selection when planning a matching rolling door layout.
• Overall height of 7 inches creates a tall recess that gives more gripping length, helping hands find purchase at different points on the door height during daily use.
• Overall width of 1-7/8 inches concentrates the pull into a relatively slim footprint, leaving space on either side of the cutout for door stile strength and any surrounding trim details.
• Depth of 7/16 inch keeps the recess shallow in the door edge or face, limiting material removal during mortising and helping maintain door thickness around the pocket.
• The pull is made from solid brass, so the body is one consistent metal piece that supports a substantial feel and stable mounting for long-term barn door operation.
• The finish is oil-rubbed bronze, giving the brass a dark, muted surface that coordinates with similarly finished rolling barn door hardware for a unified visual setup.

Flush Pull Sizing That Supports Barn Door Fit

The Quiet Glide barn door flush pull uses a 7 inch overall height, which sets the vertical dimension of the mortise and helps installers plan the pocket cut before hanging the door. With an overall width of 1-7/8 inches, the pull defines the horizontal cut size and guides layout on the door stile so the recess stays centered and leaves balanced material on both sides. The 7/16 inch depth determines how deep the routing or mortising passes go, which helps maintain enough door thickness behind the pocket for strength while still creating a recess that allows fingers to reach in. Because the pull is made from solid brass in an oil-rubbed bronze finish, the material and finish combination ties visually into Quiet Glide rolling barn door hardware in similar tones.

Using This Quiet Glide Flush Pull On Barn Doors

Barn Door Locations Suited To This Flush Pull

This Quiet Glide recessed flush pull is categorized as rolling barn door hardware, so it fits applications where a surface-mounted handle could interfere with the door sliding past trim or wall features. The 7 inch overall height gives a long pull area, which works well on taller barn doors used in openings such as room dividers or wide passage doors, because users can grab at different levels without hunting for a small grip point. At 1-7/8 inches wide, the pull suits stile areas where there is enough flat width for a narrow mortise while still preserving structural material at the edge of the door. The 7/16 inch depth keeps the recess inside the door profile, which supports installations where the door passes close to the wall and needs a low-profile handhold.

Details That Support Repeatable Barn Door Results

The defined 7 inch height, 1-7/8 inch width, and 7/16 inch depth give clear cutout targets, which aids in setting up jigs or templates for routing multiple doors with the same pull location and pocket size. Because the pull is solid brass, the installer works with a single-piece metal component that seats consistently into the prepared mortise, helping maintain tight edges between the pull and the surrounding door material. The oil-rubbed bronze finish on the solid brass body coordinates with Quiet Glide barn door hardware finishes, letting the track, hangers, and pull read as a single hardware set across the opening. Being designed to be used with Quiet Glide's barn door hardware, the pull fits into that product class, so hardware schedules for a project can specify a matching rolling system, reducing variation between doors on the same job.

Common Questions About This Barn Door Flush Pull

Selecting This Flush Pull For Quiet Glide Doors

This 7 inch recessed flush pull from Quiet Glide combines a 7 inch by 1-7/8 inch face size with a 7/16 inch depth, giving clear mortise dimensions for barn door fabrication. Solid brass construction with an oil-rubbed bronze finish fits rolling barn door hardware in the same Quiet Glide family, supporting consistent appearance across the track, hangers, and pull. For projects using Quiet Glide barn door hardware, this flush pull offers a defined, recessed handhold sized for regular sliding use on residential or commercial openings.