20229 MIDNIGHT SUN 15/16_040_300, 20229-1540-1

Doellken Woodtape Edge Banding For Midnight Sun

Doellken Woodtape edge banding in the 20229 Midnight Sun design gives a finished edge that follows the same visual direction as Tafisa L765 Midnight Sun ISOLA, which supports consistent panel projects where the edge needs to track the laminate decor. The 15/16 x 1mm PVC edgebanding format covers typical board thickness with a bit of overhang, so trimming leaves a clean line without exposing the core. This edge banding is described as a good laminate match to Tafisa L765 Midnight Sun ISOLA, which aligns the edge color and character with that surface in coordinated runs. The PVC Edge Banding category placement confirms it is intended specifically for edging panel stock rather than flat surfacing, keeping the working material straightforward for edgebanders. The 20229-1540-1 manufacturer part number clearly ties this roll to the Midnight Sun match, helping repeat orders stay consistent across jobs.

Key Edge Banding Details For Real Projects

• The 15/16 inch width spans common board thicknesses with room for trimming, so installers can run standard trimming tools and still cover the substrate reliably along the full cabinet edge.
• The 1mm thickness gives a defined edge profile compared to thinner tapes, which helps the edge read solid against Tafisa L765 Midnight Sun ISOLA panels in vertical and horizontal applications.
• The product class as PVC Edge Banding identifies the material as PVC, so cutting, bending, and trimming behavior stays predictable on standard edgebanding equipment during shop or onsite work.
• The 300ft roll length supports multiple cabinets or casework runs in one continuous supply, which reduces interruptions during edgebander setup and helps maintain color continuity through a project.
• The laminate match reference to Tafisa L765 Midnight Sun ISOLA as a good match aligns this edge banding visually to that decor, which is useful when pairing door and panel edges to that specific design.

Edgebanding Dimensions That Support Clean Fitment

The 15/16X1MM EB, MIDNIGHT SUN 300FT/RL size stated in the SAP description sets both width and thickness, so fitment planning around board thickness and trimming passes can be laid out using known dimensions. The 15/16 inch width allows slight overhang beyond standard panel thickness, which helps refinishing the edge flush without risking chip-out into the panel surface. The 1mm thickness provides more material at the edge than ultra-thin banding, which can support a more defined edge line on cabinetry. Because this product sits in the Edgebanding & Surfacing | Edgebanding, PVC category, shop teams can align it with PVC-capable edgebanders and cutters already set for similar stock. The 300ft roll format ties directly into longer runs, so setups on edgebanders can support a series of parts without changing rolls mid-job.

Using Midnight Sun Edge Banding In Cabinet Work

Where This 15/16 X 1mm PVC Banding Fits

This 15/16 x 1mm PVC edgebanding is positioned for use on panels that coordinate with Tafisa L765 Midnight Sun ISOLA, so cabinet sides, doors, and shelves using that decor can carry the same Midnight Sun look over the edges. The edge banding is part of the Edgebanding, PVC class, which directs it toward cabinet, closet, or casework projects rather than structural framing, keeping it aligned with standard panel processing. The described good laminate match means the Midnight Sun design on the banding is tuned to visually match Tafisa L765 Midnight Sun ISOLA, which helps maintain a consistent appearance where edges are prominent. The 15/16 inch width is sized for covering the thickness of typical composite panels used in cabinetry, which supports both vertical gables and horizontal tops or bottoms. With a 300ft roll length, this edge banding serves production environments where multiple components share the same decor, helping them stay visually unified.

Details That Support Repeatable Edgebanding Results

The manufacturer part number 20229-1540-1 uniquely identifies this Midnight Sun edge banding, which helps shops repeat orders and maintain color match on reorders or repairs. The 15/16X1MM EB, MIDNIGHT SUN 300FT/RL spec provides fixed dimensions, so edgebander settings can be dialed in once for this width and thickness, then replicated whenever the same part number is used. Being in the PVC Edge Banding category indicates the material is PVC, which allows shops to rely on established processing routines for PVC, such as standard trimming blades and feed speeds. The laminated match reference to Tafisa L765 Midnight Sun ISOLA as a good match ties this edge visually to that decorative surface, which supports projects where panel faces and edges need to look coordinated under direct viewing. With a 300ft roll length, operators can process a significant batch of parts under one setup, which supports consistent quality along the full run.

Common Questions About This Midnight Sun Banding

Select This Edge Banding For Midnight Sun Projects

The Doellken Woodtape edge banding in 20229 Midnight Sun, part number 20229-1540-1, aligns visually as a good laminate match to Tafisa L765 Midnight Sun ISOLA, supporting coordinated cabinet runs. The 15/16 x 1mm PVC format and 300ft roll length work well for production-oriented edging of panels, doors, and shelves using that decor. Sourcing this specific PVC Edge Banding from Wurth Baer Supply ties your project to a repeatable part number and consistent Midnight Sun appearance across future jobs.