PVC edgebanding black matte from Doellken Woodtape finishes exposed panel edges so the core is covered and protected along the full run. The 15/16 inch width works with standard 3/4 inch panels, giving enough overhang for precise trimming on cabinets and fixtures. The 0.018 inch thickness creates a low-profile edge that blends closely with flat surfaces, which is helpful when a subtle transition is preferred on visible fronts. The black matte finish provides a non-gloss look that supports understated designs and helps hide minor handling marks in service. Color 2416M is described as a match to Formica 909 Black AN, supporting consistent appearance when edging panels faced with that laminate. The 600 foot roll length supports longer production runs before changeover, which reduces downtime on edgebanders and helps maintain setup consistency across multiple parts.
The 15/16 inch x 0.018 inch format gives fabricators a defined starting point for setup on common edgebanding machines, allowing standard pressure roller and trimmer arrangements to be used for edging 3/4 inch stock. The slim 0.018 inch material interacts differently with heat and pressure than thicker banding, so operators can target settings suited to light-gauge PVC for consistent bonds. The black matte surface finish keeps the edge visually aligned with matte-faced panels, which matters when doors and drawer fronts are viewed across banks of casework. The 600 foot coil length allows repeated passes with the same material, which supports steady machine tuning and consistent results across a full job in this color.
This Doellken Woodtape PVC edgebanding is positioned for use on projects that need a black, low-sheen edge on exposed panel sides. The 15/16 inch width aligns with edging for 3/4 inch panels used in cabinetry, casework, and similar assemblies, giving coverage on verticals, shelves, and fronts. Because the web description notes a color match reference to Formica 909 Black AN, this edge material supports projects that specify that decorative surface and require a coordinated edge tone. The 0.018 inch thickness helps when a thinner edge is preferred, such as on doors or partition panels where a minimal edge build is desirable along the perimeter.
The identification of color 2416M as a match to Formica 909 Black AN gives specifiers and shops a defined pairing between the edge and the laminate, aiding in visual continuity from face to edge on finished components. The black matte finish helps maintain a uniform appearance under varied lighting because it does not reflect as strongly as glossy edges, which is useful in commercial interiors where downlighting can highlight edge conditions. The 600 foot roll length supports multiple cabinet boxes, doors, or panels from a single coil, which helps keep color and gloss level consistent across an entire run in this black matte tone. Using a consistent 0.018 inch gauge PVC also supports repeatable trimming results, as tooling can be set for this thickness and maintained across the run without changing for different edge gauges.
This Doellken Woodtape product is PVC edgebanding, which gives installers a known plastic edge material when setting heat, pressure, and feed rates on edgebanding equipment.
The 15/16 inch width is wider than a 3/4 inch panel, providing extra material beyond each face so trimmers can create a flush edge without exposing the core.
The 0.018 inch thickness produces a relatively thin edge profile, which supports a subtle transition from face to edge and interacts well with light trimming passes.
The roll length is 600 feet, enabling longer edging runs on production equipment before coil changeover and supporting consistent settings across multiple parts.
The web description lists color 2416M as a color match to Formica 909 Black AN, supporting coordinated appearance between the laminate face and the finished panel edges.
The black matte finish provides a low-sheen surface along the edge, which helps support understated designs and reduces visible reflections around cabinet fronts.
This 15/16 inch x 0.018 inch Doellken Woodtape PVC edgebanding in color 2416M black matte suits projects using 3/4 inch panels, especially where Formica 909 Black AN faces are specified. Choosing this 600 foot roll supports longer, consistent edging runs in a coordinated black matte finish.
Sold In: 600 Lineal Ft