Doellken PVC Edgebanding 15/16" x 1 mm, 4469 Kensington Maple, 300', 4469 1540 1

PVC Edgebanding Kensington Maple For Laminate Runs

PVC edgebanding Kensington Maple describes a 1mm thick Doellken Woodtape edge banding in color 4469 Kensington Maple supplied in a 15/16 inch by 300 foot roll, giving cabinet and fixture runs a continuous matched edge in one material batch. The PVC construction provides a uniform synthetic edge that tracks straight along cabinet sides, shelves, and panels where a consistent profile is needed over long lengths. The 1mm thickness builds a noticeable edge detail that covers the panel core, supporting a finished look around doors, drawer fronts, and casework. The 15/16 inch width works with standard panel thicknesses, so the edge can be trimmed flush without excess waste along typical cabinet substrates. A 300 foot roll supports multiple carcasses or a full job run from the same color lot, which helps keep visible edges visually consistent across a bank of cabinets or fixtures.

Color-Matched Edge Banding For Key Laminates

• The color 4469 Kensington Maple is identified for use as edge banding where that specific tone is required, giving panel edges a coordinated maple look on cabinets and fixtures.
• The web description lists a color match to American Laminates Hardrock as "Good," supporting use where that laminate decor is present across vertical or horizontal faces.
• The edge banding is described as a "Good" color match to Formica 9238 Chelsea Maple, which lets the edge tone follow that laminate across doors, tops, or partitions.
• Color match is noted as "Close" to Funder 610 Hardrock Maple #4 in Suede finish, allowing the edge to visually coordinate with that surface in applications where a near match is acceptable.
• The banding is described as a "Good" color match to Nevamar W8351 Fine Sycamore in textured finish, extending its use to that decorative surface in casework projects.
• The description notes a "Good" color match to Pluswood 15N Fine Sycamore, supporting visual alignment of exposed panel edges in jobs using that board.
• Roseburg Duramine 055 Hard Rock Maple in Suede is listed with a "Good" match, which helps keep vertical and horizontal edges consistent with that panel stock.
• Wilsonart 10776 Kensington Maple in 60 Matte is described as a "Good" match, tying door and panel faces in that decor to this edge banding color on finished work.

Edgebanding Dimensions That Support Clean Finishing

This Doellken Woodtape PVC edge banding is 1mm thick, so it adds a defined but manageable edge that can be flushed and profiled without removing excessive material from the band. The 15/16 inch width provides coverage for common panel thicknesses, letting fabricators align the strip to one face and trim back for a clean reveal on both sides. The 300 foot roll length supports edging repeated cabinet parts from the same roll, which helps maintain color consistency around kitchen runs, commercial casework, or institutional fixtures where many edges are visible in one room.

Using Kensington Maple Edge Banding On Projects

Where This Kensington Maple PVC Edge Works

This PVC edge banding in color 4469 Kensington Maple is positioned for use anywhere a maple-look edge is needed around panels finished in matching or related decors. The web description specifies that it provides a "Good" color match to American Laminates Hardrock, Formica 9238 Chelsea Maple, Nevamar W8351 Fine Sycamore, Pluswood 15N Fine Sycamore, Roseburg Duramine 055 Hard Rock Maple Suede, and Wilsonart 10776 Kensington Maple 60 Matte, and a "Close" match to Funder 610 Hardrock Maple #4 Suede and Nevamar WM5528 Vermont Maple Textured. Those references show this banding serving on vertical and horizontal edges in kitchens, offices, or commercial interiors that use those specific laminate or panel numbers. Because the banding is 1mm thick PVC, it builds an edge suitable for doors, drawer fronts, shelves, and cabinet cases where a synthetic edge is preferred over a thin paper edge.

Details That Support Repeatable Edge Results

The 1mm thickness of this Doellken Woodtape edge banding gives installers a solid PVC layer to trim after bonding, which helps keep the face free of telegraphing from the panel core during use. That thickness also provides enough material for light profiling along corners while still maintaining the Kensington Maple color layer along the edge, supporting consistent appearance on repeated parts. The 15/16 inch width allows a small amount of overhang on standard panel thicknesses, so trimming tools can track along the face and leave a tight joint without exposing substrate. Because the roll length is 300 feet, shops can process multiple cabinet runs or a complete room of casework from a single roll, which keeps all visible edges drawn from the same Kensington Maple color reference for a uniform job finish. The documented "Good" and "Close" color relationships to specific laminate and panel numbers allow project planners to align edge banding selection with those materials at the spec stage, supporting predictable visual results across cut parts, doors, and field-installed components.

Common Questions About Kensington Maple Edgebanding

Select Kensington Maple PVC Edge For Matched Runs

This Doellken Woodtape PVC edge banding in color 4469 Kensington Maple, sized at 1mm thick by 15/16 inch wide in a 300 foot roll, is positioned for projects built around the listed maple and sycamore laminate and panel decors. The documented "Good" and "Close" color matches to named products from American Laminates, Formica, Funder, Nevamar, Pluswood, Roseburg Duramine, and Wilsonart help fabricators align their edge choice with those specific surfaces for consistent visual results. For cabinet shops and millwork teams planning maple-tone interiors that reference those decor numbers, this roll offers a defined thickness and run length to handle repeated parts under a single Kensington Maple color reference.