Edgebanding 8664AA, Chinook 1mm Thick x 15/16" Width

Edgebanding 8664AA For Chinook Panel Projects

Edgebanding 8664AA is a PVC edge banding from Doellken Woodtape designed as a practical edging solution where a Chinook tone is required. The product is 1mm thick, giving a solid edge profile that stands up well in regular cabinet and fixture use. Its 15/16 inch width gives coverage for common panel thicknesses while allowing a small trimming margin for a clean, flush finish after machining. The color is specified as a good match to Tafisa L536 Chinook Alto, which supports visually consistent runs when working with that panel color in casework or shelving. This edgebanding is supplied under manufacturer part number 8664AA-1540-1, which ties it directly to the Chinook tone in the Doellken Woodtape system and helps standardize material selection across repeated jobs.

Key Edgebanding 8664AA Details For Shop Use

• The 1mm thickness creates a substantial PVC edge that machines cleanly and supports durable corners on cabinets, doors, and shelving exposed to regular contact.
• The 15/16 inch width gives enough coverage to edge typical board thicknesses and leaves workable overhang for trimming and finishing operations.
• The color match is specified as Tafisa L536 Chinook Alto - Good, helping visually blend the edge to that Tafisa surface in production runs.
• The PVC construction places this product squarely in the Edgebanding & Surfacing, Edgebanding, PVC category, aligning with common casework and furniture fabrication workflows.
• The manufacturer part number 8664AA-1540-1 offers a precise identifier for reordering the same Chinook tone across future projects.

Edgebanding 8664AA Size And Fit In Workflow

This Doellken Woodtape edgebanding is defined at 1mm thick, giving fabricators a known edge mass that responds predictably to trimming and scraping equipment. The 15/16 inch width is sized to cover the edge of standard panels while providing enough excess for clean routing or scraping operations without starving the edge. Being a PVC edge banding in the Edgebanding & Surfacing category, it fits directly into common cabinet, closet, or furniture production where PVC materials are already part of the process. The Chinook color reference, tied to Tafisa L536 Chinook Alto, supports consistent visual alignment when this edgebanding is applied along exposed panel edges in visible installations.

Choosing This Chinook 1mm Edge Banding

Where This 1mm Chinook Edge Banding Fits Best

This edge banding is identified specifically as Edgebanding 8664AA, Chinook 1mm Thick x 15/16 inch Width, aligning it with projects that call for a Chinook appearance on exposed panel edges. The web description states that its color match is Tafisa L536 Chinook Alto - Good, which means that when working with Tafisa L536 Chinook Alto panels, this banding helps carry that tone across doors, drawer fronts, and case edges. As a PVC product in the Edgebanding, PVC class, it fits into environments where PVC-faced components are standard, such as commercial casework, residential storage, and similar woodworking applications using Tafisa surfaces.

The 1mm thickness gives a defined edge presence, which supports use on cabinet doors, shelf fronts, and verticals where a heavier edge detail is preferred over extremely thin tape. The 15/16 inch width is suited to edging panel stock that approximates that width once trimmed, so fabricators can run it through edgebanders and follow with standard trimming tools to achieve flush, consistent lines. The branded origin from Doellken Woodtape ties this part to an established edgebanding manufacturer, which can assist shops that keep material libraries keyed by brand and color name, particularly when repeating Tafisa L536 Chinook Alto based jobs.

Why These Dimensions Support Repeatable Results

The specified 1mm thickness provides enough material for controlled trimming without risking cut-through, which can support consistent results across long production runs. This thickness also contributes to a sturdy edge that maintains its profile on cabinet and furniture components that encounter regular handling. The 15/16 inch width is a practical match to standard panel edging needs, giving a predictable amount of overhang for machining while minimizing waste from excessive width.

The documented color match to Tafisa L536 Chinook Alto - Good lets finish planners anticipate how edges will read against the panel faces in completed installations. By tying the product to the precise identifier 8664AA-1540-1, buyers can specify the same Chinook edgebanding for initial production and later service work, keeping replacement parts visually aligned. Classified under Edgebanding & Surfacing, Edgebanding, PVC, this product aligns with typical shop processes that already rely on PVC banding, supporting steady material handling, gluing, and finishing routines without changing standard workflows.

Common Questions About Edgebanding 8664AA Use

Select Edgebanding 8664AA For Chinook Projects

Edgebanding 8664AA ties together a 1mm thickness, 15/16 inch width, and a color match listed as Tafisa L536 Chinook Alto - Good, giving shops a defined choice when finishing Chinook-colored panels. With its PVC construction and Doellken Woodtape branding, it fits directly into established edgebanding workflows in cabinet and furniture production. For projects built around Tafisa L536 Chinook Alto surfaces, selecting this specific 8664AA-1540-1 part number supports consistent, repeatable edging results across initial fabrication and follow-up work.