Quiet Glide library ladder rung in walnut gives a dedicated top step for rolling library ladder builds using this specific turned component. The 16 inch top rung design defines where the user stands, which helps standardize spacing across the ladder.
The unfinished walnut construction lets installers sand and finish the rung to match surrounding walnut millwork, keeping a consistent appearance across rails, stiles, and other ladder parts. Overall length of 15-3/8 inches sets the distance between stile connection points, which guides layout when drilling and fitting the ladder sides.
The 1-1/4 inch diameter at the center establishes the main gripping and standing surface, which influences the feel underfoot on the upper rung. A Quiet Glide part number QG.610.WA identifies this specific top-turned rung within the Quiet Glide rolling library ladders line, which aids in ordering and stocking the correct component for repeat jobs.
The overall length of 15-3/8 inches works as the primary layout dimension when positioning this top rung in rolling library ladders, because that distance governs where the rung shoulders meet each stile. The 1-1/4 inch center diameter establishes the circular contour that installers reference when aligning other ladder rung drilling patterns, so the rungs line up on a common centerline.
Turned down ends at 7/8 inch diameter x 1/2 inch long create a reduced tenon-style section, which influences how deep and wide ladder stile holes or mortises are prepared. The unfinished walnut surface lets shops handle final sanding and finishing after dry fitting, which supports blending this rung smoothly with other walnut components in the ladder assembly.
This turned top rung for library ladders is specified as a 16 inch top rung, so it is intended for the upper position in a rolling library ladder assembly. The Quiet Glide branding ties it to Quiet Glide rolling library ladders work, which helps installers keep part families consistent within a project.
The walnut material designation makes this part suited to walnut-based casework and shelving installations, because the base wood species matches surrounding walnut panels and trim. Overall length of 15-3/8 inches provides the working span between ladder stiles, so builders use that dimension when laying out stile spacing for the top rung.
The 1-1/4 inch diameter at the center defines the round profile for user contact, and that shared dimension with other 1-1/4 inch ladder hardware supports a uniform feel across all rungs in the system. Turned down ends at 7/8 inch diameter x 1/2 inch long allow the ends to interface with appropriately sized holes or joints in the wooden stiles, which helps set a repeatable mechanical connection point along both sides.
The specified 15-3/8 inch overall length allows shops to cut and drill ladder stiles using a single known span for the top location, which improves consistency between ladders built from the same dimensions. The 1-1/4 inch center diameter gives fabricators a clear reference when setting up jigs for drilling or routing rung seats, because the round profile remains constant across builds.
Turned down ends at 7/8 inch diameter x 1/2 inch long simplify tenon-style joinery, since the reduced diameter and fixed length define how deep the stile seats should be bored for proper support. The walnut unfinished construction means sanding and finishing can be performed to project standards after fitting, which helps the top rung visually match other walnut ladder and casework components in custom or production runs.
The Quiet Glide part number QG.610.WA serves as an exact identifier for this 16 inch top-turned rung in ordering systems, which helps installers and shops repeatedly source the same component when building multiple rolling library ladders or servicing existing installations.
The top rung has an overall length of 15-3/8 inches, which sets the stile-to-stile spacing for the upper step in a rolling library ladder layout.
The library ladder rung has a 1-1/4 inch diameter at the center, which defines the main round profile used for standing and gripping on the top step.
The top rung has turned down ends at 7/8 inch diameter x 1/2 inch long, which creates a reduced section suited to fitting into matching ladder stile joinery.
The Quiet Glide top rung is made from walnut, which aligns with walnut casework or ladder projects where matching wood species is important.
The walnut ladder rung is unfinished, allowing sanding and finishing to project requirements so it visually matches surrounding walnut components.
The QG.610.WA designation identifies this 16 inch top-turned walnut rung within Quiet Glide rolling library ladders, which helps with accurate reordering.
This 1-1/4 inch x 15-3/8 inch wide turned top rung for library ladders in walnut provides a defined 16 inch top rung component for rolling library ladders. The walnut unfinished construction, 1-1/4 inch center diameter, and 7/8 inch turned down ends supply fixed dimensions for ladder stile layout.
Using the Quiet Glide QG.610.WA part within Quiet Glide rolling library ladders projects keeps rung sizing, wood species, and top position detailing consistent from one installation to the next.