Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Portico Teak is a Doellken Woodtape edge banding designed to finish exposed panel edges in a Portico Teak look. The roll is 15/16 inch wide, so it covers standard 3/4 inch panels while giving a small trim margin along the edge. The material is PVC at 0.020 inch thick, which creates a low-profile edge that blends closely with the panel face without adding bulk at doors or drawer fronts. The 600 foot roll length supports longer runs or multiple cabinet jobs from a single roll, reducing changeovers during cutting and banding. The color identification is 30177AAM Portico Teak, which keeps finish selection consistent from job to job when the same design is specified. This edgebanding is classified under Edgebanding & Surfacing as PVC, so it fits into typical shop workflows that already run PVC banding on cabinets, fixtures, and similar casework.
This Doellken Woodtape PVC edgebanding is 15/16 inch wide, so it aligns well to common 3/4 inch panel builds used in cabinet boxes, doors, and shelves, leaving a workable trim margin on both sides. The 0.020 inch thickness keeps the banding light enough for standard edgebanders set up for thin PVC tape, so feed wheels and trimmers can run typical settings for similar thin stock. The 600 foot roll format feeds well on machines designed for continuous coil use, supporting steady production instead of short-run handling. The Portico Teak appearance, referenced as color 30177AAM, lets shops dedicate specific hoppers or racks to this look, simplifying labeling and retrieval on repeat projects.
This PVC edgebanding, categorized as Edgebanding & Surfacing and Edge Banding, is intended for covering exposed edges on wood-based panels in cabinetry and related casework. The 15/16 inch width suits vertical cabinet sides, tops, bottoms, and shelves built from 3/4 inch stock, giving edges a finished Portico Teak appearance. The same width can be used on slab cabinet doors and drawer fronts built from matching panel material, helping all visible edges carry the same visual tone as the face surface. The 600 foot roll length is well suited to runs of multiple cabinets or full room installations, because a single coil can serve repeated edge passes on panels, doors, and drawer components in the same color family.
The Portico Teak identification, color 30177AAM, connects the banding appearance to a consistent design reference, so shops can align their edge treatment with panels specified in the same look. The web description notes a color match relationship to Wilsonart 8210K Portico Teak 28_Glossli as Good, which signals that this banding is selected to visually coordinate with that particular Wilsonart design. In practical terms, that stated match level guides its use on projects where Wilsonart 8210K Portico Teak surfaces are part of the build, helping the finished cabinet or fixture present a unified Portico Teak edge and face combination across doors, drawer fronts, and box edges.
The 15/16 inch width paired with 3/4 inch panels offers a predictable overhang that sanding and trimming stations can dial in, which helps reduce rework from cut-through at corners. When operators know the banding is 0.020 inch thick PVC, they can set trimmers and scrapers for thin tape work, keeping edges crisp without digging into the panel face. The stable 600 foot length on each roll means once a machine is dialed for this Portico Teak banding, the same setup can run through many parts before any coil change interrupts production, supporting consistent results from the first panel to the last.
Using a defined color reference such as 30177AAM Portico Teak simplifies both initial setup and later replacement work, because the same identifier can be called out on cut lists and job packets whenever a Portico Teak edge is required. The described Good color match to Wilsonart 8210K Portico Teak 28_Glossli helps designers and shops coordinate panel selection and edge treatment in a controlled way, which is important when the visual target is a unified Portico Teak appearance across verticals, horizontals, and fronts. This combination of fixed width, thin PVC construction, long roll length, and explicit color coding helps production teams repeat results across multiple jobs that use the same Wilsonart Portico Teak design.
This edgebanding has a 15/16 inch width, which covers 3/4 inch panels with extra margin, giving trimmers room to cut a flush, clean edge without exposing core material.
This Doellken Woodtape banding is 0.020 inch thick PVC, creating a slim edge that works well on doors and drawer fronts where minimal edge buildup is important.
Each coil provides 600 feet of PVC edgebanding, which supports longer cabinet or fixture runs from one roll and helps maintain a single setup for many parts.
Color 30177AAM Portico Teak identifies the specific Portico Teak appearance, so shops can repeatedly order the same look and align it with matching panel designs.
The web description notes a color match to Wilsonart 8210K Portico Teak 28_Glossli as Good, guiding its use when coordinating edges with that Wilsonart design.
The manufacturer part number is 30177AAM-1520-1, which provides a precise reference when specifying this Portico Teak PVC edgebanding for future projects.
This Doellken Woodtape PVC edgebanding in color 30177AAM Portico Teak combines a 15/16 inch width, 0.020 inch thickness, and 600 foot roll length to support efficient cabinet edge work. When a project calls for a Good color relationship to Wilsonart 8210K Portico Teak 28_Glossli, this edge banding delivers a defined Portico Teak appearance on exposed panel edges. Use the manufacturer part number 30177AAM-1520-1 when adding this edgebanding to project lists so repeat jobs can match the same Portico Teak finish across cabinets, fixtures, and casework.