Edgebanding 3465S, Biltmore Cherry 3mm Thick x 15/16" Width

Edgebanding 3465S Biltmore Cherry For Clean Edges

Edgebanding 3465S Biltmore Cherry is a PVC edge banding designed to cover and finish exposed panel edges, so cabinet and furniture projects carry the Wilsonart 7924K Biltmore Cherry look across faces and edges. The 3mm thickness gives a substantial edge profile that visually matches thicker doors or tops, which helps projects avoid a thin, unfinished appearance on high-visibility runs. The 15/16 inch width is sized for standard panels, giving workable overhang for trimming without excessive waste during production. The Biltmore Cherry color match to Wilsonart 7924K supports visual continuity from laminate surface to edge treatment. The 07 Texture designation identifies a textured surface that aligns with the referenced finish, which helps panels read as a single coordinated component rather than a flat edge next to a textured face. Doellken Woodtape PVC construction provides a stable edge solution for everyday shop environments.

Key Biltmore Cherry Edge Details For Shops

• The 3mm thick profile creates a robust visible edge that ties in with doors, tops, or shelves using the same look, so the finished run appears consistent from every viewing angle.
• The 15/16 inch width supports coverage on common panel thicknesses while still allowing a trim pass, which saves time aligning the band during application and cleanup.
• The Biltmore Cherry color match to Wilsonart 7924K coordinates edges with that specific laminate pattern, helping jobs maintain a planned design scheme across cabinets and casework.
• The 07 Texture surface aligns with the referenced laminate texture, so the touch and visual grain of the edge work in the same direction as the panel face for a unified appearance.
• PVC edgebanding from Doellken Woodtape offers a consistent manufactured profile, which supports repeatable results when feeding lengths through edgebanders in production runs.

Edgebanding 3465S Biltmore Cherry Fit And Setup

The 15/16 inch width on this Biltmore Cherry 3mm edge banding allows installers to position the tape with slight overhang on both sides of standard panels, which provides enough material for a clean trim without double passes. The 3mm thickness means the edge stands proud enough to be flush-trimmed and lightly eased without losing the cherry appearance, which helps maintain a consistent shadow line along cabinet fronts. As a PVC edgebanding, the material is suited to typical edgebander processing, supporting controlled feed and trimming on production equipment. The specific Biltmore Cherry color match to Wilsonart 7924K gives shops a defined target when setting up runs, reducing trial cuts when aligning edge detail to laminated faces on coordinated jobs.

Why This Biltmore Cherry Edge Banding Works

Where This 3mm Biltmore Cherry Banding Fits

This Doellken Woodtape PVC edgebanding in Biltmore Cherry is aligned to projects using Wilsonart 7924K Biltmore Cherry laminate, so it fits naturally on cabinet boxes, shelving, or furniture parts designed around that decor. The 3mm thickness suits applications where a more substantial edge detail is preferred, such as exposed case ends or thicker shelving, giving these components a finished look that matches the visual weight of the surface. Because the width is 15/16 inch, it works with panels that sit within that range, giving fabricators enough control to center the band and still maintain trimming allowance. The 07 Texture match means it fits textured laminate installations, helping edges follow the same tactile and visual story as the primary surfaces on doors, sides, or tops.

Details That Support Consistent Edge Results

The defined Biltmore Cherry color match to Wilsonart 7924K allows shops to treat this edge banding as a known part of a coordinated system, which simplifies job labeling and reduces risk of mixing similar cherry tones on a single project. The 3mm thickness offers an edge that is forgiving to minor handling during machining because there is material depth to support flush trimming and light edge breaking without exposing the substrate. With 15/16 inch width, the band provides a workable margin over typical panel thicknesses, which helps edgebanders track accurately and leaves a consistent reveal for trimmers. The PVC composition from Doellken Woodtape supports smooth feeding and clean cuts on properly set equipment, which helps maintain uniform edges across multiple cabinets or runs of shelving in a shop workflow.

Common Questions About Biltmore Cherry 3mm Edgeband

Select Biltmore Cherry Edgebanding For Coordinated Runs

Choosing Edgebanding 3465S Biltmore Cherry aligns edge treatment with Wilsonart 7924K Biltmore Cherry laminate, so projects carry the same decor from face to edge. The 3mm thickness and 15/16 inch width give shops a defined, workable profile that suits standard panels and visible casework. With Doellken Woodtape PVC construction and the specified 07 Texture, this edge banding offers a coordinated option for fabricators planning consistent cherry projects through Wurth Baer Supply.