Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Brazilwood 3mm describes a Doellken Woodtape edge banding designed to finish exposed panel edges so they visually match Wilsonart 7946K Brazilwood laminate. The 15/16 inch width covers standard 3/4 inch panels with margin for trimming, which helps installers achieve a flush, professional edge. The 3mm thickness builds a substantial edge profile, which supports a more furniture-like look on casework and doors. Supplied in a 328 foot roll, this format supports longer runs on commercial or residential projects without frequent changeover, which can streamline shop or onsite workflow. The color match reference to Wilsonart 7946K Brazilwood in Fine Ve texture provides a practical guide when coordinating laminate and edge material on the same job. This product sits in the PVC Edgebanding & Surfacing class, aligning it with typical cabinet and fixture fabrication tasks.
This PVC edgebanding is specified at 3mm thick and 15/16 inch wide, dimensions that pair well with 3/4 inch panel construction where a larger edge profile is desired. The extra width beyond panel thickness allows trimming equipment to remove slight overhang on both sides, which supports a clean, flush edge without risking exposure of the substrate. Because the product is supplied as a continuous 328 foot roll, shops can set up edgebanders or hand-application stations once and process multiple components in sequence, improving consistency across cabinet doors, shelves, or partitions. The color reference to Wilsonart 7946K Brazilwood guides where this roll fits best visually, helping designers and installers align this edge treatment within coordinated laminate projects.
This Doellken Woodtape PVC edgebanding in color 5966 Brazilwood is aligned with the Edgebanding & Surfacing category, positioning it for cabinet, furniture, and general woodworking applications that use laminate or panel-based construction. The reference to Wilsonart 7946K Brazilwood in Fine Ve texture points toward projects where that laminate pattern is specified, such as commercial casework, counters, or built-ins, and the edge needs to visually continue the surface design around exposed sides. At 3mm thickness, the banding suits doors, drawer fronts, and work surfaces where a more substantial edge detail is desired instead of a minimal tape look, giving fabricators flexibility in how they present visible edges on higher-traffic components.
The combination of 3mm thickness and 15/16 inch width gives installers a consistent geometry to set up trimming and profiling tools, which helps achieve repeatable results from part to part. On 3/4 inch panels, the added width leaves controlled overhang for trimmers, reducing the chance of undercutting the face. The 328 foot roll length supports maintaining the same color and lot across a full run of cabinets or fixtures, which matters when doors, drawer fronts, and shelves sit adjacent in a finished installation. The clearly defined manufacturer part number 5966-1503-1 allows shops to document the exact edge banding used on a job, supporting accurate reorders when additions or repairs are needed while preserving the original Brazilwood color relationship.
This Brazilwood 5966 edge banding is PVC, which aligns it with common edgebanding and surfacing workflows used in cabinet and laminate-based fabrication.
The 15/16 inch width extends beyond 3/4 inch panel thickness, allowing trimming on both faces to reach a flush edge without leaving the substrate exposed.
The Wilsonart 7946K Brazilwood reference indicates the color and texture target, helping coordinate this PVC edgebanding with that specific laminate design.
The 3mm thickness creates a more substantial edge profile, which supports shaping and trimming on doors, drawer fronts, or shelves requiring a heavier visual edge.
The 328 foot roll length supports longer edging runs on production equipment, reducing roll change interruptions during repetitive cabinet or fixture work.
Part number 5966-1503-1 uniquely identifies this 3mm, 15/16 inch PVC edgebanding in Brazilwood color, helping shops document and reorder the exact product.
This Doellken Woodtape PVC edgebanding, identified as 5966-1503-1, combines 3mm thickness, 15/16 inch width, and a stated color match to Wilsonart 7946K Brazilwood in Fine Ve texture, aligning it with laminate-based cabinet and fixture projects. The 328 foot roll format supports production runs where consistent color and edge profile are important across multiple parts. For work that calls for a Brazilwood visual with a thicker edge detail on 3/4 inch panels, this edge banding configuration provides defined dimensions and a clear color reference to integrate directly into established edgebanding processes.