PVC Edgebanding, Color 4125 Hardrock Maple, 3mm Thick 1-5/16" x 328' Roll

PVC Edgebanding For Hardrock Maple Panels

PVC edgebanding, Color 4125 Hardrock Maple, 3mm Thick 1-5/16" x 328' Roll gives cabinet shops and casework builders a dedicated edge treatment that lines up with popular Hardrock Maple and Fusion Maple panel colors. The 3mm PVC construction adds a substantial edge profile that helps visually match thicker laminate or TFL faces on finished parts. The 1-5/16 inch width suits edges built around that size panel build-up, allowing installers to trim flush to the face for a clean, uniform reveal. The 328 foot roll length supports production runs where repeat color consistency on many parts is important. With a defined Color 4125 Hardrock Maple tone, this roll targets maple-look projects so edges and faces present as a coordinated surface during installation and final inspection.

Key Hardrock Maple Edgebanding Details

• The Color 4125 Hardrock Maple tone is described as a close or good color match to several maple-look surfaces, which helps keep visible seams from drawing attention on cabinet fronts and shelving.
• The 3mm thickness creates a solid edge profile, giving more material to trim and finish at corners, which supports a more substantial look on doors, drawer fronts, and panels.
• The 1-5/16 inch width is sized for edges that finish out near that dimension, so fabricators can apply, trim, and flush the banding without leaving undersized edges on finished pieces.
• The 328 foot roll length supports repetitive cabinet or fixture runs where using a single color batch helps maintain consistent appearance across multiple doors and panels.
• The Doellken Woodtape brand identity links this edgebanding to a dedicated edge banding product line, which matters to shops standardizing SKUs and reordering by part description.

Edgebanding Thickness And Width In Use

The 3mm thick design of this PVC edgebanding gives installers a deeper edge to work with along 1-5/16 inch panel edges, which supports confident trimming without cutting past the face material. The 1-5/16 inch width aligns with that edge size, so once bonded, excess can be trimmed down to a smooth, flush fit with the panel surfaces. Together, this thickness and width help maintain a straight visual line along cabinet carcasses, doors, and shelving where any mismatch between face and edge would otherwise stand out. For shops handling repeated maple-look jobs, the stable dimensions support jig setups and workflow planning across multiple runs using the same 3mm, 1-5/16 inch profile.

Using Color 4125 Hardrock Maple Edgebanding

Where This PVC Edgebanding Fits Best

This PVC edgebanding, Color 4125 Hardrock Maple, is described as a color match or close match to several maple-look panel options, including American Laminates Fusion Maple and Arclin H7749 Hardrock Maple. That alignment positions it for use on casework and cabinet jobs where those surfaces are specified, so the edge color stays in the same visual family as the faces. The web description also links it as a good match for KML KMD749 Hardrock Maple, Ie Classic, Pionite WM791 Hardrock Maple N_Suede, Pluswood 97W Hardrock Maple II, and Thermo Pressed TFL-020 Hardrock Maple. In practice, that means a single Color 4125 roll can support a range of Hardrock Maple and Fusion Maple designs across different board suppliers while still targeting a unified look at the panel edges. For fabricators, this helps keep color decisions tied to one reference number when coordinating between laminate, TFL, and edgebanding on the same project.

Why The 3mm Profile Supports Consistent Results

The 3mm Thick 1-5/16" x 328' Roll format gives shops a predictable profile to run through their standard edgebanding equipment, which supports repeatable processes from job to job. With a 3mm thickness, there is more PVC material at the edge, which provides working room during trimming and finishing while aiming for a solid, furniture-style edge on doors and drawer fronts. The 1-5/16 inch width is specified in the SAP description and web naming, so operators can match this dimension to edge setups that expect that coverage across panel thickness and overhang. The 328 foot length per roll supports extended runs before changing material, which is useful when entire kitchens, banks of lockers, or commercial fixtures all call for a Hardrock Maple edge color. Using the same Color 4125 Hardrock Maple profile along every exposed edge keeps the project visually aligned with the selected maple-look face materials from the first install through follow-up pieces.

Common Questions About Hardrock Maple Edgebanding

Select Color 4125 For Maple-Look Edge Work

This PVC edgebanding, Color 4125 Hardrock Maple, 3mm Thick 1-5/16" x 328' Roll from Doellken Woodtape gives shops a defined Hardrock Maple tone, substantial 3mm profile, and 1-5/16 inch width for coordinated edge treatment on maple-look casework and cabinetry projects.