LED 8W Warm White Light Panel, 12"

LED 8W Warm White Light Panel 12 Inch Use

LED 8W warm white light panel 12 inch from Tresco Lighting is a 12 inch by 12 inch LED panel designed to deliver 900 lumens per square foot, so cabinet, display, or work surfaces get strong, even illumination in a compact layout. The panel runs on 24 volts, using 8 watts per square foot and 0.5 watts per 3 inch square, which keeps power demand low across larger install areas. Each individual panel section measures 3 inches high by 3 inches wide by 1/16 inch thick, allowing the lighting grid to sit close to surfaces without taking up usable space. The 3000K warm white color delivers a warm white appearance, which suits spaces where a softer tone supports comfortable visibility. A 120 degree beam spread sends light broadly across the target area, reducing bright spots and helping create a continuous field of light with fewer shadowed gaps.

Key LED Panel Details For Project Planning

• The 12 inch by 12 inch square format organizes the LED panel into a predictable footprint, which simplifies laying out coverage across cabinet runs or display cases where installers need repeatable spacing.
• 900 lumens per square foot output provides a high light level from a thin panel, allowing strong task or display lighting without resorting to deeper fixtures that compete for space.
• Power consumption of 8 watts per square foot and 0.5 watts per 3 inch square controls electrical load, which helps when multiple panels are tied to one 24 volt circuit or driver.
• Each 3 inch by 3 inch panel section with 1/16 inch thickness keeps the light source close to mounting surfaces, which is useful in shallow recesses or tight under-cabinet applications.
• The 3000K warm white color temperature sets a warm white tone, which fits installations where a comfortable, residential-feeling light is preferred over cooler color temperatures.
• A 120 degree beam spread throws light broadly from each panel area, which helps blend individual segments into a continuous wash and reduces striping or narrow hot spots.

LED Panel Mounting And Layout Considerations

The Tresco Lighting 12 inch by 12 inch LED panel uses a 3 inch by 3 inch by 1/16 inch section size, so installers can plan cut lines and layout points around those repeating modules. The 24 volt rating aligns with low-voltage lighting systems, supporting longer low-voltage runs compared with higher-current options at the same power level. At 8 watts per square foot, electrical planning is straightforward because each square foot of panel adds a consistent load. The 120 degree beam spread influences spacing to adjacent surfaces, since mounting the panel near the work area allows the wide beam to fill the space with fewer dark edges.

Where This 24V LED Panel Light Excels

3x3 Inch LED Light Panel Module Applications

The SAP description identifies this product as a 12 inch square snap panel operating at 24 volts with 0.5 watts per 3 inch square and 3000K color, so each 3 inch module acts as a repeatable light segment for grid-style layouts. With each individual panel section at 3 inches high, 3 inches wide, and 1/16 inch thick, the low profile supports use against flat cabinet bottoms, shelving, or casework without significantly lowering available interior height. The 900 lumens per square foot output helps these thin modules perform as primary task or display lighting in installations where traditional bulkier fixtures would be intrusive. Because the panel is sold as 12 inch by 12 inch squares, planning coverage becomes a matter of counting square-foot sections to span the intended area.

Details That Support Consistent Lighting Results

A 50,000 hours lamp life rating gives the LED panel a long service window, which reduces how often lighting within built-in casework or millwork must be accessed for replacement. The 24 volt system voltage pairs with the 8 watts per square foot load so that circuits can be calculated on a per-panel basis, making driver sizing and run length planning more predictable. The 120 degree beam spread from each panel section helps blend the 3 inch squares into an even field of light, which is useful when panels are installed close to visible surfaces where uneven patterns would stand out. The warm white 3000K color temperature keeps illumination consistent across all segments of the panel, helping the finished installation present a uniform tone from one cabinet or display bay to the next.

Common Questions About This Warm White Panel

Selecting This Panel For Low-Profile Lighting

The Tresco Lighting LED 8W warm white light panel 12 inch pairs a 12 inch by 12 inch square format with 3 inch by 3 inch by 1/16 inch sections, giving installers a thin, modular LED option for casework and cabinet lighting. With 900 lumens per square foot, 24 volt operation, 8 watts per square foot, and 3000K warm white color, it supports projects needing strong yet low-profile illumination. Using 50,000 hours of rated lamp life and a 120 degree beam spread, this panel suits long-term, evenly lit installations where consistent light across the full surface is important.