Karran Q-315-WH bar prep sink gives you a single bowl quartz kitchen sink sized for bar and prep layouts, so you can add a dedicated work station where space is tight. The sink is manufactured from 80% crushed quartz plus 20% acrylic resin, which creates a hard-working composite bowl that stands up well in busy kitchen or bar environments. Its single bowl layout keeps the 24-1/4 inch by 18-1/4 inch footprint efficient while still providing usable working room. The 8-1/2 inch depth offers a practical basin depth that handles typical prep, rinsing, and bar tasks without overwhelming smaller cabinet runs. A 3-1/2 inch waste opening matches common kitchen drain sizing, so tying into a standard drain system aligns with typical bar and prep plumbing layouts.
This Karran quartz bar and prep sink is designed for undermount installation, so it attaches beneath the countertop and leaves the deck clear for wiping debris straight into the basin. It can only be installed in new countertops, not in existing tops with an existing sink cutout, which directs this model to remodels or new construction where a fresh cutout is planned. The sink may be bonded seamlessly in solid surface and laminate, allowing an integrated appearance in those materials. It may also be undermounted to all stone products, giving fabricators flexibility in pairing it with granite, quartz, or similar tops. An 1/8 inch overhang is recommended at the opening, but it can also be installed flush, providing two workable reveal options for different shop preferences and job specifications.
This Karran 16-5/8 inch by 16-5/8 inch single bowl quartz kitchen sink is sized for bar and prep locations where full-size bowls are not required. Its compact external footprint of 24-1/4 inches by 18-1/4 inches helps it fit into shorter runs of cabinetry that often occur on peninsulas, kitchen islands, and dedicated beverage stations. The 8-1/2 inch bowl depth creates space for rinsing glassware or prepping garnishes without pulling the working surface too low in standard bar cabinet constructions. Because the sink may be bonded seamlessly in solid surface and laminate, it supports applications where a continuous, easy-wipe deck is desired in those materials. The ability to undermount to all stone products means the same bowl can be used across multiple stone-based designs, keeping the bar sink choice consistent throughout a project that mixes different stone tops.
The undermount installation requirement keeps the sink mounted beneath the countertop, which streamlines cleanup at the bar or prep station by eliminating a raised rim. Its 1-1/4 inch by 3/4 inch machined resin rim provides a defined edge for fabricators to work to, helping achieve a precise sink cutout interface. The recommendation for a 1/8 inch overhang gives a clear starting point for setting the reveal profile and can also be adjusted to a flush install when that look is preferred. The 3-1/2 inch waste opening matches common kitchen drain hardware, which aligns this sink with standard drain layouts used across many bar and prep stations. External dimensions specified as approximate to within 1/4 inch signal that final fabrication can fine-tune the opening, so the sink and countertop meet the needs of each specific installation.
The Karran Q-315-WH sink measures 24-1/4 inches by 18-1/4 inches externally, so fabricators can plan a compact bar or prep layout while leaving counter space for surrounding tasks.
The sink bowl depth is 8-1/2 inches, providing enough capacity for typical barware rinsing and prep work while still fitting standard bar and kitchen cabinet heights.
The Karran sink is manufactured from 80% crushed quartz plus 20% acrylic resin, giving it a dense composite structure suited to regular kitchen or bar prep applications.
The Q-315-WH requires undermount installation, so it mounts beneath the countertop and creates a clean transition for wiping scraps directly into the basin.
This sink may be bonded seamlessly in solid surface and laminate and may be undermounted to all stone products, giving flexibility across common countertop materials.
The sink has a 3-1/2 inch waste opening, aligning it with standard kitchen sink strainers and drains used in many bar, prep, and smaller kitchen setups.
The Karran Q-315-WH bar prep sink combines a single bowl layout, compact 24-1/4 inch by 18-1/4 inch footprint, and 8-1/2 inch depth to support bar and prep stations where space and function both matter. Its 80% crushed quartz plus 20% acrylic resin construction and matte finish create a composite bowl that integrates cleanly with solid surface, laminate, and stone installations. With undermount installation, a machined resin rim, and a standard 3-1/2 inch waste opening, this sink fits smoothly into new countertop projects that call for a dedicated bar or prep sink.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KAQBSWH Mfr# QBSWH | 3-1/2" Quartz Strainer Basket, White | ||||
Sold in: 1 Each | KAQDFWH Mfr# QDFWH | 3-1/2" Quartz Disposal Flange, White | ||||
Sold in: 1 Each | KAL-1 Mfr# L-1 | 3-1/2 steel strainer basket by Karran L-1 | ||||
Sold in: 1 Package | KADISC-CLIP Mfr# DISCCLIP | Karran Disc Clip Undermount Clips For Sinks |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KA70001K Mfr# WHISA | Karran seaming adhesive white 250 ml tube | ||||
Sold in: 1 Each | KA70020 Mfr# TIPS | Cartridge Mixing Tips for 250ml Seaming Adhesive | ||||
Sold in: 1 Each | KAAG Mfr# AG | Seam Adhesive Guns For Karran Sinks AG | ||||
Sold in: 1 Each | KAPROTECT-TAPE Mfr# PROTECT PLUS TAPE | Protect Tape For Karran Sinks, 2" | ||||
Sold in: 1 Each | KALUSTEROIL Mfr# LUSTERPRO | LUSTER OIL QUARTZ/GRNITE SINK CLEANER, LUSTERPRO | ||||
Sold in: 1 Each | KAQCC Mfr# QCC | Quartz Sample Chain For Karran Sinks |