Rev-A-Shelf 438 Maple 6" 3-Shelf Base Cabinet Pullout Organizer with Soft-Close Slides, 438-BCSC-6C
Description
Choose a Rev-A-Shelf pullout organizer
Rev-A-Shelf base cabinet pullout organizer is a narrow cabinet storage insert designed for base cabinets and built with maple shelves. This Rev-A-Shelf pullout organizer, manufacturer part 438-BCSC-6C, is made for 6 inch and 9 inch base cabinets and includes BLUMOTION soft-close slides for controlled closing. The unit is a kitchen cabinet pull-out system with three shelves in a maple finish and includes door mount brackets for attaching the cabinet door to the pullout. For buyers replacing a tight-space base cabinet organizer or planning a new install, this model focuses on access in small cabinet openings while keeping contents easier to reach than fixed shelving.
Use a base cabinet organizer better
- Rev-A-Shelf three-shelf pullout organizer - Three shelf levels help separate smaller kitchen items in a narrow base cabinet.
- Maple shelf finish - Maple pullout shelves provide a wood interior look that matches many cabinet installations.
- Designed for 6 inch and 9 inch base cabinets - This fit range helps buyers target slim cabinet spaces where fixed shelves waste access.
- BLUMOTION soft-close slides - Soft-close travel helps reduce abrupt closing during daily use.
- Door mount brackets included - Included brackets support a door-mounted installation approach for one-motion access.
- Base cabinet pullout organizer format - The pullout design brings stored items forward instead of forcing deep reach into the cabinet.
- Rev-A-Shelf branded cabinet accessory - Buyers looking for a known cabinet storage brand can match this organizer to other Rev-A-Shelf components.
- Approximate listed height of 27.3 inches - The published height helps buyers start checking cabinet interior clearance before ordering.
Confirm fit for cabinet pullout organizer
Key specs to confirm: This maple base cabinet pullout organizer is listed for 6 inch and 9 inch base cabinets and has a published height of 27.3 inches. Before purchase, confirm your cabinet opening, interior depth, door style, hinge clearance, and available mounting area so the pullout can travel freely. Because this is a base cabinet organizer with door mount brackets, buyers should also verify the door can be attached without interference. Load capacity, exact width tolerance, exact depth, and any compliance or safety details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are three maple-finish shelves, BLUMOTION soft-close slides, and door mount brackets. Packaging is sold as each.
What to verify before ordering: Check whether your cabinet is a 6 inch or 9 inch base cabinet, confirm the interior height works with the listed 27.3 inch organizer height, review door attachment needs, and make sure slide travel will clear hinges, face frames, and nearby plumbing or obstructions.
Plan around your soft-close cabinet pullout
Match the base cabinet organizer to storage
A narrow pullout is often selected when a standard base cabinet leaves a slim space that is hard to use with fixed shelving. In that situation, a 6 inch base cabinet pullout can make spices, wraps, bottles, or small pantry items easier to access because the shelves move out with the cabinet door instead of hiding contents in the back. This Rev-A-Shelf base cabinet pullout organizer is built for that type of application. The verified product data identifies it as a three-shelf organizer with a maple finish, intended for 6 inch and 9 inch base cabinets.
For installers, the practical value is straightforward. A soft-close cabinet pullout with BLUMOTION soft-close slides helps the unit return in a controlled way during repeated daily use. Door mount brackets are included, which matters for buyers who want the cabinet door tied directly to pullout movement. That setup can simplify access because the user opens the door and organizer together rather than opening a door first and then reaching inside.
This product may also fit remodel work where a homeowner wants a maple base cabinet pullout organizer that aligns visually with wood cabinet interiors. The listed height of 27.3 inches gives a starting point for planning, but buyers should still confirm exact interior cabinet dimensions, available depth, and hinge clearance. If the cabinet has face-frame restrictions, interior obstructions, or unusual door geometry, those details should be checked before ordering. The same applies if the cabinet is near plumbing, electrical runs, or other installed hardware. Follow manufacturer installation guidance and local building requirements where applicable.
Compare soft-close cabinet pullout details
When buyers compare a kitchen cabinet pull-out system, the useful differences are often material, included hardware, intended cabinet size, and how the unit closes. This Rev-A-Shelf pullout organizer clearly identifies several of those points. It uses maple shelves, includes door mount brackets, and comes with BLUMOTION soft-close slides. Those are concrete details a buyer can use when deciding whether the organizer matches the cabinet build and the desired feel in use.
Generic pullouts may vary widely in shelf material, whether soft-close hardware is included, and whether door mounting hardware comes in the carton. A buyer reviewing this product does not have to assume those items, because they are stated in the verified data. The product is also positioned specifically for 6 inch and 9 inch base cabinets, which helps narrow fit decisions for slim cabinet openings. That makes it easier to compare against broader, less specific cabinet organizer listings.
Brand also matters when a project already uses matching cabinet accessories. Rev-A-Shelf is the stated manufacturer and brand for this base cabinet pullout organizer, which helps buyers keep component selection consistent across a kitchen or bath project. Even so, exact fit should always be confirmed from cabinet measurements and technical documentation rather than assumed from cabinet label size alone. If you need exact width allowance, mounting dimensions, or load details, verify those points before final purchase.
Check cabinet pullout organizer questions
Will this fit a 6 inch base cabinet?
This Rev-A-Shelf base cabinet pullout organizer is designed for 6 inch and 9 inch base cabinets, but exact interior clearance should be confirmed before ordering.
Can this organizer also be used in a 9 inch base cabinet?
This pullout organizer is listed for 6 inch and 9 inch base cabinets, so buyers should verify the cabinet opening and mounting space for the intended installation.
Does the pullout include soft-close slides?
This Rev-A-Shelf pullout organizer includes BLUMOTION soft-close slides as part of the verified product package.
Are door mount brackets included?
This base cabinet organizer includes door mount brackets, which support attaching the cabinet door to the pullout assembly.
How many shelves does this cabinet pullout have?
This Rev-A-Shelf maple pullout organizer has three shelves.
What finish are the shelves?
This cabinet pull-out system includes shelves in a maple finish.
What height should I check before installation?
This organizer has a listed height of 27.3 inches, so cabinet interior height and clearance above and around the unit should be checked.
What should I verify for installation in a narrow cabinet?
This base cabinet pullout should be checked for opening width, interior depth, hinge clearance, door attachment space, and any plumbing or hardware obstructions.
Is load capacity listed for this organizer?
Load capacity for this Rev-A-Shelf pullout organizer is not provided here and should be confirmed with the manufacturer or technical documentation.
Are there any code requirements for installing this product?
This cabinet organizer should be installed by following manufacturer installation guidance and local building requirements where applicable.
Finish your Rev-A-Shelf pullout organizer order
Soft-close cabinet pullout buyers should confirm cabinet fit first, then review the included components and mounting needs. This Rev-A-Shelf pullout organizer includes three maple-finish shelves, BLUMOTION soft-close slides, and door mount brackets, and it is intended for 6 inch and 9 inch base cabinets. Before purchase, check the listed 27.3 inch height against your cabinet interior, confirm door and hinge clearance, and verify any exact dimensional or load requirements that are not stated in the product data.