Choose a Rev-A-Shelf vanity drawer
Rev-A-Shelf vanity drawer gives you a preassembled wood vanity replacement drawer for bath cabinet upgrades where smooth travel and quiet closing matter. This Rev-A-Shelf product is a vanity drawer system made from maple and sized at 10-1/2 in. wide, 18-11/16 in. deep, and 4-5/16 in. high. It includes soft-close full extension slides with BLUMOTION soft-close slides, and it is designed for 12 in., 15 in., and 18 in. frameless base cabinets. The drawer arrives fully assembled, and the product data states you just add your drawer front. For buyers replacing a cabinet replacement drawer in vanity cabinet products, that means fewer assembly steps and a clearer path to matching the drawer to an existing bath cabinet layout.
See how this vanity drawer helps
- Rev-A-Shelf wood vanity replacement drawer - Gives buyers a ready-made drawer option for replacing or updating vanity storage without building a drawer box from scratch.
- Maple construction - Provides a wood drawer body that suits bath cabinet projects where a finished, furniture-style material is preferred.
- Soft-close full extension slides - Helps the drawer open fully for easier access to stored items and close with controlled motion.
- Includes BLUMOTION soft-close slides - Supports quieter closing and a more controlled feel during daily vanity use.
- Fully assembled drawer - Reduces installation time because the drawer box is already put together.
- Just add your drawer front - Lets installers match the visible front to the cabinet style already used in the room.
- Designed for 12 in., 15 in., and 18 in. frameless base cabinets - Helps buyers narrow fit for common frameless vanity cabinet widths before ordering.
- 10-1/2 in. W x 18-11/16 in. D x 4-5/16 in. H size - Gives a defined drawer size to compare against cabinet interior space and front layout.
Confirm vanity drawer specs and included parts
Key specs to confirm: This 4VDO vanity drawer system is listed at 10-1/2 in. wide, 18-11/16 in. deep, and 4-5/16 in. high. The product is designed for 12 in., 15 in., and 18 in. frameless base cabinets, so buyers should confirm cabinet construction style, inside clearance, and drawer-front sizing before purchase. Because this is a wood vanity replacement drawer that uses soft-close full extension slides, also verify that your cabinet opening and mounting conditions match the manufacturer's installation guidance. Load rating, safety details, and any compliance information are not provided in the verified data and should be confirmed with the manufacturer or technical documentation.
What's included: Verified data confirms a fully assembled Rev-A-Shelf maple vanity drawer with BLUMOTION soft-close slides. The product data also states that you add your drawer front.
What to verify before ordering: Confirm that your cabinet is frameless, check that it falls within the stated 12 in., 15 in., or 18 in. base cabinet range, measure interior depth and side clearance against the 18-11/16 in. drawer depth, and confirm the drawer front you plan to add will suit the 10-1/2 in. wide by 4-5/16 in. high drawer body.
Compare this vanity drawer for cabinet fit
Use this vanity drawer for bath storage
A common reason to buy a wood vanity replacement drawer is to improve access in a bathroom cabinet that has limited organization or a worn drawer box. The Rev-A-Shelf vanity drawer is built for that kind of project when the cabinet is a frameless base style and the opening falls within the listed 12 in., 15 in., or 18 in. cabinet range. Because the drawer is fully assembled, installers and serious DIY buyers can focus on checking fit, aligning slides, and adding the correct drawer front rather than spending extra time building a box.
This 4VDO vanity drawer can also help when a buyer wants smoother movement than a basic drawer setup. The verified product data states that it includes BLUMOTION soft-close slides and full extension slides. In practical use, full extension helps bring stored items farther out of the cabinet so they are easier to reach, while soft-close action helps reduce abrupt closing. For vanity storage, that can be useful for toiletries, grooming items, and small bath supplies where quick access matters.
Another realistic use case is a remodel where the visible cabinet style needs to stay consistent. Since the product is supplied as a maple vanity drawer and the data says to just add your drawer front, the installer can pair the drawer box with a front that matches the existing room design. That makes this cabinet replacement drawer a fit-driven choice rather than a decorative one. Before ordering, buyers should still confirm interior cabinet dimensions, mounting conditions, and front sizing, because the verified data does not provide every installation measurement needed for every vanity layout.
Compare vanity drawer build and install details
When buyers compare vanity drawer system options, the most useful differences are usually material, assembly level, slide type, and cabinet compatibility. This Rev-A-Shelf product gives verified details in each of those areas. It uses maple construction, arrives fully assembled, includes soft-close full extension slides, and is intended for frameless base cabinets in the listed size range. Those facts make it easier to compare against a generic drawer box or a drawer that requires separate slide selection.
Another point buyers often weigh is how much finishing work remains after delivery. Here, the product data is direct: the drawer is assembled and the buyer adds the drawer front. That can simplify project planning for installers who already have a matching front or need to coordinate with an existing vanity face style. It also helps avoid assuming that a front is included when it is not stated as part of the package.
Brand matters in replacement parts because consistency of construction and hardware can affect installation workflow. Rev-A-Shelf is clearly identified as the brand, and the verified listing ties this item to vanity cabinet products and the 4VDO series. That gives buyers a defined product identity for reorder, specification review, or matching other project components. If your project requires details such as weight capacity, exact mounting hardware list, or technical drawings, those items should be confirmed through manufacturer documentation before final purchase.
Ask fit questions before vanity drawer install
Will this Rev-A-Shelf vanity drawer fit framed cabinets?
This Rev-A-Shelf vanity drawer is verified for frameless base cabinets. Follow manufacturer installation guidance and local building requirements where applicable.
What cabinet sizes is this wood vanity replacement drawer designed for?
This wood vanity replacement drawer is designed for 12 in., 15 in., and 18 in. frameless base cabinets.
Are the slides included with this vanity drawer system?
This vanity drawer system includes BLUMOTION soft-close slides with full extension travel.
Does the drawer come assembled?
This Rev-A-Shelf drawer is fully assembled according to the verified product data.
Is the drawer front included?
This wood vanity replacement drawer requires you to add your drawer front.
What are the drawer dimensions?
This maple vanity drawer is listed at 10-1/2 in. wide, 18-11/16 in. deep, and 4-5/16 in. high.
Can I use this as a cabinet replacement drawer in a bathroom vanity?
This cabinet replacement drawer is part of vanity cabinet products and is intended for vanity cabinet use where the frameless cabinet fit matches.
What should I measure before ordering?
This vanity drawer requires checking cabinet style, interior depth, width clearance, and the drawer front size you plan to add.
Order the right wood vanity replacement drawer
Wood vanity replacement drawer buyers should confirm cabinet style, opening size, and front requirements before placing an order. This Rev-A-Shelf 4VDO vanity drawer is a fully assembled maple drawer with BLUMOTION soft-close slides and full extension travel, designed for 12 in., 15 in., and 18 in. frameless base cabinets. The verified package details support a straightforward replacement path, but you should still verify interior fit, slide mounting conditions, and the drawer front you will add so the installation matches your vanity cabinet project.
