Rev-A-Shelf 4VDOHT Series 14-7/16" W x 18" D x 7-1/2" H , Wood Vanity Replacement Drawer - 4VDOHT-18-1

Choose a vanity replacement drawer

Rev-A-Shelf wood vanity replacement drawer is a maple vanity drawer made for vanity cabinet upgrades where organized storage and a clean fit matter. This Rev-A-Shelf vanity drawer is a wood vanity drawer from the 4VDOHT Series, sized at 14-7/16 inches wide, 18 inches deep, and 7-1/2 inches high. It is designed for 12 inch, 15 inch, and 18 inch face frame base cabinets and arrives fully assembled, so the installer only needs to add drawer slides and a drawer front. The half tier vanity drawer layout helps create usable storage in bathroom cabinetry, and the product is designed for Blum BLUMOTION 563F4570B undermount slides. Buyers comparing RS4VDOHT-15-1 and RS4VDOHT-18-1 style searches should confirm the exact cabinet opening, slide choice, and drawer front requirements before ordering.

See how this wood vanity drawer helps

• Maple construction - Rev-A-Shelf uses maple for this wood vanity drawer, giving buyers a finished wood drawer body suited for vanity cabinet use.
• Fully assembled drawer box - The vanity replacement drawer arrives assembled, which can reduce shop time and simplify installation planning.
• Half tier design - The half tier vanity drawer format helps buyers organize smaller bathroom items within a compact cabinet space.
• Designed for face frame base cabinets - This Rev-A-Shelf vanity drawer is intended for 12 inch, 15 inch, and 18 inch face frame base cabinets, helping narrow fit decisions.
• Designed for Blum BLUMOTION 563F4570B undermount slides - Buyers can match the drawer to a verified slide type instead of guessing at slide compatibility.
• No slide included - Installers can source the required slide set separately and match it to the cabinet build and project needs.
• Drawer front added separately - The product lets buyers finish the vanity replacement drawer with a drawer front that matches the cabinet style.
• 14-7/16 inch width, 18 inch depth, 7-1/2 inch height - The listed dimensions give buyers a starting point for checking opening size and installation clearance.

Confirm wood vanity drawer fit details

Key specs to confirm: This Rev-A-Shelf wood vanity replacement drawer measures 14-7/16 inches wide, 18 inches deep, and 7-1/2 inches high. It is designed for 12 inch, 15 inch, and 18 inch face frame base cabinets, and it is designed for Blum BLUMOTION 563F4570B undermount slides. Because this is a vanity drawer system sold without slides, buyers should confirm cabinet opening dimensions, face frame conditions, drawer front size, and the exact slide requirements before purchase. Load rating, compliance details, and any safety-related installation limits are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One fully assembled Rev-A-Shelf 4VDOHT Series wood vanity replacement drawer in maple construction. Slides and drawer front are not included and should be added separately.

What to verify before ordering: Confirm your cabinet is a face frame base cabinet, verify the opening can accept a drawer that is 14-7/16 inches wide by 18 inches deep by 7-1/2 inches high, check that Blum BLUMOTION 563F4570B undermount slides are the intended hardware, and make sure your selected drawer front will fit the cabinet style and reveal requirements.

Use a Rev-A-Shelf vanity drawer confidently

Match a half tier vanity drawer to storage needs

A half tier vanity drawer is often chosen when a bathroom cabinet needs better organization without changing the whole vanity. In many remodels and repair jobs, the cabinet box is still serviceable, but the existing drawer is worn, missing, or poorly sized for the way the space is used. A vanity replacement drawer like this Rev-A-Shelf model gives installers and serious DIY buyers a ready-made drawer box instead of starting from raw material.

This product is a practical fit when the project calls for a wood vanity drawer in a face frame cabinet. The verified application covers 12 inch, 15 inch, and 18 inch face frame base cabinets, which helps narrow where it belongs. The listed size of 14-7/16 inches wide, 18 inches deep, and 7-1/2 inches high gives a direct reference point for cabinet planning. Because vanity openings can vary by construction method, buyers should still measure the actual opening, face frame clearance, and available depth before ordering.

The fully assembled format helps when time on site matters. Instead of building, clamping, and finishing a new drawer box, the installer can focus on matching the right hardware and front. That matters in vanity work, where sink plumbing, cabinet rails, and face frame details can leave less room for adjustment than in open base cabinetry. This half tier vanity drawer also supports organized storage for small bathroom items, which is a common reason buyers search for a maple vanity drawer or a Rev-A-Shelf vanity drawer replacement.

Slide selection is a key part of the purchase decision. The product is designed for Blum BLUMOTION 563F4570B undermount slides, but the slides are not included. That means the buyer should confirm the intended slide set, mounting conditions, and any cabinet preparation needed. If you are matching a prior search such as RS4VDOHT-15-1 or RS4VDOHT-18-1, verify that the series reference aligns with your cabinet opening and project requirements, not just the search term.

Compare a Rev-A-Shelf vanity drawer with generic options

When buyers compare a branded vanity replacement drawer with a generic drawer box, the main differences usually come down to defined application, known dimensions, and installation planning. This Rev-A-Shelf wood vanity replacement drawer has verified dimensions, a verified cabinet application, and a verified slide design reference. That makes it easier to evaluate than a drawer box with limited fit information.

Another point of comparison is assembly status. This drawer is fully assembled, which can help reduce fabrication steps for a replacement job. For a shop or installer, that can simplify workflow when the goal is to restore function in a vanity cabinet rather than custom-build every part. Buyers still need to add slides and a drawer front, but the core drawer box is already built.

The maple construction also matters for buyers who want a wood vanity drawer rather than a mixed-material or unspecified box. While the product data does not provide finish details, load ratings, or hardware contents beyond the no-slide format, it does identify the material and intended use clearly. That gives a more reliable starting point for fit checks and project planning.

In generic comparisons, it is also important to look at what is not included. Some drawer systems include slides or fronts, while this one does not. That is not a drawback if your job requires matching existing cabinetry, but it does mean the buyer should confirm every related component before ordering. Follow manufacturer installation guidance and local building requirements where applicable.

Ask fit questions before vanity drawer install

Finish your vanity replacement drawer check

vanity replacement drawer selection is easier when the cabinet opening, slide choice, and front requirements are confirmed before purchase. This Rev-A-Shelf wood vanity replacement drawer gives you a fully assembled maple drawer box in a half tier format, sized 14-7/16 inches wide by 18 inches deep by 7-1/2 inches high for specified face frame base cabinet applications. Before ordering, verify cabinet fit, confirm use of Blum BLUMOTION 563F4570B undermount slides, and make sure the drawer front and installation details match your project.

Compare wood vanity drawer purchase needs

Buyers choosing a wood vanity drawer for replacement work usually need clear dimensions, a known cabinet application, and a defined slide path. This product provides those basics in the verified data, while leaving slides and drawer front selection to the installer. That makes it suitable for projects where cabinet matching matters. If your priority is a ready-to-install box for a face frame vanity cabinet, compare your opening size, hardware plan, and front requirements carefully before purchase so the finished drawer performs as intended.