Rev-A-Shelf 4VDOT Series 10" W x 18" D x 7-1/2" H, Wood Vanity Replacement Drawer - 4VDOT-267FL-1

Choose a vanity replacement drawer

Rev-A-Shelf wood vanity replacement drawer is a wood vanity drawer made for vanity storage upgrades in frameless base cabinets. This Rev-A-Shelf vanity drawer is part of the 4VDOT Series and measures 10 in. W x 18 in. D x 7-1/2 in. H. The vanity drawer system is fully assembled, so installers can add their preferred undermount drawer slides and drawer front during final setup. Product data states this maple vanity drawer is designed for 12 in., 15 in. and 18 in. frameless base cabinets and is designed for Blum BLUMOTION 563F4570B undermount slides. For buyers replacing a worn drawer box or planning a custom vanity front, this replacement drawer for frameless base cabinets gives a defined starting point without guessing the box dimensions.

Use a wood vanity drawer better

• 10 in. W x 18 in. D x 7-1/2 in. H size - These listed drawer box dimensions help buyers match the Rev-A-Shelf vanity drawer to the cabinet opening and storage plan.
• Designed for 12 in., 15 in. and 18 in. frameless base cabinets - This fit range helps installers narrow cabinet compatibility before ordering a vanity replacement drawer.
• Fully assembled drawer box - The assembled wood vanity drawer reduces shop time and speeds jobsite preparation.
• No slides included - Buyers can pair the vanity drawer system with the slide set specified for the project instead of replacing unused hardware.
• Designed for Blum BLUMOTION 563F4570B undermount slides - This compatibility note helps buyers choose the slide platform intended for this drawer box.
• Drawer front added separately - The Rev-A-Shelf wood vanity replacement drawer supports custom front matching for existing vanity finishes and styles.
• Maple construction - The maple vanity drawer gives buyers a wood drawer box material clearly identified in the product data.
• Rev-A-Shelf 4VDOT Series vanity drawer system - The series reference helps buyers match this drawer to related vanity cabinet products in the same line.

Confirm vanity drawer fit and contents

Key specs to confirm: This vanity replacement drawer is listed at 10 in. wide, 18 in. deep, and 7-1/2 in. high. Product data states it is designed for 12 in., 15 in. and 18 in. frameless base cabinets. Buyers should confirm the cabinet is frameless, verify the available interior opening, and check that the planned slide choice matches the stated design intent for Blum BLUMOTION 563F4570B undermount slides. If your project depends on load rating, extension type, soft-close performance beyond the named slide platform, or any compliance detail, those items should be confirmed with the manufacturer or technical documentation before purchase.

What's included: One fully assembled Rev-A-Shelf 4VDOT Series wood vanity replacement drawer in maple construction. Product data states slides are not included, and the drawer front is added separately.

What to verify before ordering: Confirm cabinet type is frameless, check whether your base cabinet size falls within the stated 12 in., 15 in. or 18 in. range, verify drawer box dimensions against the opening, confirm use of Blum BLUMOTION 563F4570B undermount slides, and make sure your drawer front plan matches the drawer box and vanity layout.

Compare this Rev-A-Shelf vanity drawer

Use a vanity drawer for tight storage

A vanity drawer system like this is often selected when a buyer needs to replace a damaged drawer box, update an existing vanity interior, or build a more organized drawer layout in a bath cabinet. The Rev-A-Shelf vanity drawer is useful when the cabinet is already in place and the buyer wants a finished drawer box rather than building one from raw material. Because this product is fully assembled, it can reduce fabrication steps for installers who would rather focus on fitting the hardware and front panel.

This wood vanity drawer is specifically described as a replacement drawer for frameless base cabinets. That matters because cabinet construction affects mounting space, drawer alignment, and slide installation. Buyers working on framed cabinets should not assume fit. They should confirm construction type before ordering. The listed cabinet range of 12 in., 15 in. and 18 in. also helps narrow use cases, but the exact interior clearances still need to be checked on site.

The maple vanity drawer can also make sense for projects where the visible front will be matched to surrounding cabinetry. Product data says the drawer front is added separately, so the buyer can plan a front that matches the vanity face. This is useful in remodel work where the box needs replacement but the finish appearance must stay consistent with the room.

Slide planning is another practical issue. This frameless vanity drawer is designed for Blum BLUMOTION 563F4570B undermount slides, but the slides are not included. That gives the installer flexibility, yet it also means the buyer should verify the slide set, mounting requirements, and any needed hardware before ordering. If the project requires a certain travel length, load rating, or motion feature, those details should be checked in the slide documentation because they are not stated in the verified product data.

Compare wood vanity drawer options carefully

When buyers compare a vanity replacement drawer, the most useful differences are usually cabinet fit, assembly level, material, and slide compatibility. This Rev-A-Shelf wood vanity replacement drawer gives clear information in those areas. It is identified as a maple drawer box, it arrives fully assembled, and it is intended for frameless base cabinets within the stated size range. That can make planning easier than starting with an unfinished box that requires additional fabrication or guessing at fit.

Another point buyers often compare is hardware flexibility. This product does not include slides, so it is better suited to projects where the installer already knows the intended slide platform or wants to source slides separately. The product data also names Blum BLUMOTION 563F4570B undermount slides as the design target. That kind of compatibility note is useful because it gives a specific reference point for installation planning.

Brand consistency also matters in cabinet accessories. Rev-A-Shelf is the listed brand, and this drawer is part of the 4VDOT Series under vanity cabinet products. For buyers who want to stay within a known product family, that series identification can help with ordering and matching related components. The most reliable way to compare this drawer to other options is to check cabinet construction, opening size, required slide type, and whether a separate drawer front fits your project plan.

Check vanity drawer questions before ordering

Order the right frameless vanity drawer

Frameless vanity drawer selection is easier when you match the listed drawer box size, cabinet type, and slide compatibility before purchase. This Rev-A-Shelf wood vanity replacement drawer includes a fully assembled maple drawer box, while slides and the drawer front are separate. Confirm that your cabinet is frameless, verify that your vanity falls within the stated cabinet range, and check that Blum BLUMOTION 563F4570B undermount slides fit your installation plan. Those steps help avoid ordering a drawer that does not match the cabinet opening or hardware setup.