Rev-A-Shelf kidney lazy susan is a two-tier cabinet accessory built for angled corner base cabinets with a hinged door. This Rev-A-Shelf set includes two solid bottom kidney-shaped maple shelves, one telescoping post, and mounting hardware for installation. The independently rotating lazy susan design lets each tray turn on its own, which helps you reach stored items without moving both shelves together. The telescoping shaft lazy susan hardware is designed to accommodate inner cabinet heights from 26 inches to 32 inches. Each shelf is rated for up to 64 pounds. For buyers replacing a worn unit or fitting out a new angled corner base cabinet lazy susan location, this set focuses on access, fit range, and included hardware rather than extra parts you may not need.
Key specs to confirm: This maple kidney lazy susan uses two 32 inch diameter kidney-shaped shelves and is designed for angled corner base cabinets with a hinged door. The telescoping post accommodates inner cabinet heights from 26 inches to 32 inches. Before ordering, confirm your cabinet is the correct angled corner base style, verify the usable interior height falls within that range, and make sure the door and opening provide clearance for a kidney shaped lazy susan to rotate. The verified shelf capacity is 64 pounds per shelf. Any unlisted dimensional, compliance, or installation details should be confirmed with the manufacturer or technical documentation.
What's included: Two solid bottom kidney-shaped shelves, one telescoping post, and mounting hardware.
What to verify before ordering: Check cabinet type, inner height, shelf diameter fit, door style, and access clearance. Confirm your application uses a hinged door and not another corner cabinet layout. If you need exact mounting hole locations or additional dimensions, confirm them before purchase.
For many kitchen layouts, the angled corner base cabinet becomes a hard-to-reach storage zone. Pots, mixing bowls, food containers, and small appliances often end up pushed into the back where they are difficult to see and harder to grab. A kidney shaped lazy susan addresses that access problem by giving the corner cabinet a rotating storage platform shaped for this style of opening.
This Rev-A-Shelf kidney lazy susan is intended for buyers who need a defined fit for an angled corner base cabinet with a hinged door. That matters because not every corner cabinet uses the same shelf shape or turning hardware. The 32 inch diameter trays and the kidney profile are part of the fit equation, while the telescoping shaft supports inner cabinet heights from 26 inches to 32 inches. If your cabinet falls outside that range, you should confirm compatibility before ordering.
The independently rotating lazy susan design is especially useful in busy kitchens. Instead of moving both shelves together, each tray rotates on its own. That can make daily access easier when one level holds heavier cookware and the other holds lighter pantry items. It also helps installers and remodel buyers choose a two tier lazy susan that supports organized storage without adding extra mechanisms not listed in the verified product data.
The solid bottom lazy susan shelf construction gives users a full shelf surface rather than an open wire format. Buyers who want a wood interior look or a continuous shelf base often prefer this style. Because the shelves are maple and solid bottom, the set fits projects where cabinet appearance matters along with access. The included hardware also helps streamline ordering for buyers who want the trays, post, and mounting parts in one set.
Load planning is another practical step. This product has a verified capacity of 64 pounds per shelf. That gives buyers a clear storage limit for kitchen use. If you plan to store unusually heavy items or need exact spacing between trays, confirm those details in technical documentation before installation.
When buyers compare one lazy susan to another, the most important differences are usually cabinet fit, tray shape, rotation style, included hardware, and shelf construction. This product gives clear verified details in those areas. It is a lazy susan for angled corner cabinet use, it uses kidney-shaped trays, and it includes independently rotating hardware with a chrome-plated telescoping shaft.
That combination helps buyers who are trying to avoid common ordering mistakes. A shelf may look similar online but still fail to match the cabinet opening, interior height, or door configuration. Here, the intended cabinet type is stated, the inner height range is stated, and the included parts are stated. That makes it easier to compare this set against other cabinet accessories without relying on assumptions.
The Rev-A-Shelf brand is clearly identified on the product, which helps when matching an existing cabinet plan or replacing a prior unit from the same manufacturer. The set format is also useful for installers because the package includes two shelves, one telescoping post, and mounting hardware rather than requiring separate tray and post ordering based on the verified description. Buyers should still confirm exact cabinet dimensions and clearance because a correct product type does not replace jobsite measurement.
For projects where access is the main goal, independently rotating trays can be a practical advantage over designs that move as one assembly. For projects where appearance and shelf surface matter, the solid bottom maple construction may fit the cabinet interior better than other shelf styles. The right choice depends on cabinet shape, opening clearance, and the type of items you plan to store.
This Rev-A-Shelf kidney lazy susan is designed for angled corner base cabinets with a hinged door, so buyers should confirm that cabinet style before ordering.
The telescoping post is designed to accommodate inner cabinet heights from 26 inches to 32 inches.
This independently rotating lazy susan uses hardware that lets each shelf turn on its own.
This lazy susan with hardware includes two solid bottom kidney-shaped shelves, one telescoping post, and mounting hardware.
This Rev-A-Shelf two tier lazy susan has a verified capacity of 64 pounds per shelf.
This product is a kidney shaped lazy susan, not a round tray design.
This maple kidney lazy susan uses solid bottom maple shelves.
This lazy susan for angled corner cabinet installation should be matched to door swing and opening clearance before purchase. Follow manufacturer installation guidance and local building requirements where applicable.
Maple kidney lazy susan is a practical choice when you need two solid bottom shelves, a telescoping post, and independently rotating hardware for an angled corner base cabinet. This Rev-A-Shelf set is built for cabinets with a hinged door and fits inner cabinet heights from 26 inches to 32 inches. Before purchase, confirm cabinet style, usable interior height, shelf clearance, and door access so the included two shelves, post, and mounting hardware match your installation.
Sold In: 1 Each