Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 53TM waste pullout installs into a frameless base cabinet and puts two silver 35-quart bins behind a single door, rolling out on full-extension, soft-close slides so both bins are fully accessible in one pull.
Running two separate bins in one cabinet is the practical way to handle daily waste in a kitchen without a second door or a second cabinet. This pullout puts 35 quarts of capacity in each bin, enough for a full kitchen's trash and recycling through a typical day, with room to spare. Because the carriage comes all the way out on full-extension slides, the bin at the back is just as reachable as the one in front. Bag changes and bin removal are straightforward since the top-mount frame leaves the bin openings clear from above.
The carriage is finished in gray and pairs with the two silver bins, a combination that holds up in a working kitchen without showing every smudge. The soft-close mechanism does the work of the last few inches on the closing stroke, bringing the loaded carriage to a stop quietly rather than letting it bang shut. At 90 pounds of rated capacity, the slide system is built for bins that are genuinely full, not just nominally loaded. The door-mount hardware connects the carriage to the cabinet door so opening the door pulls the bins forward automatically, no separate handle needed.
The 53TM series is sized for frameless construction, where the cabinet opening runs edge to edge without a face frame reducing the usable width. This unit needs a minimum opening of 16-7/32 inches wide, 19 inches tall, and 21-3/4 inches deep. Measure the clear interior opening before ordering, since frameless and face-frame openings for the same nominal cabinet width are different numbers. Cabinet shops and builders specifying for a run of frameless boxes will find this unit straightforward to call out: the dimensions are precise and the door-mount hardware is included. Homeowners retrofitting an existing frameless kitchen can install it at the same cabinet opening without modification.
This unit is engineered for frameless cabinets. If your cabinet has a face frame, the reduced clear opening may not meet the minimum width or height. Check the 53TM series specs for face-frame-compatible versions.
Two 35-quart silver bins are included with the carriage. If lids are needed, check the Rev-A-Shelf accessories listing for compatible lids sold separately.
Yes. The door-mount bracket is included so the carriage connects directly to the cabinet door.
The slides are full-extension, so the carriage travels completely out of the cabinet, giving you unobstructed access to both bins and their full depth.
The system is rated to 90 pounds total, which covers two 35-quart bins with normal household or commercial kitchen loads.
Two large bins, soft-close slides, and a top-mount frame sized for frameless cabinets make this pullout a practical, durable solution for a kitchen that runs two waste streams without dedicating two separate cabinet doors to them.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS53TM1850GSCDM2FL Mfr# 53TM-1850GSCDM2-FL | Rev-A-Shelf 53TM 16-7/32" Gray 2-50 Quart Top-Mount Waste Pullout with Silver Bins and Soft-Close Slides, 53TM-1850GSCDM2-FL | ||||
Sold in: 1 Each |  RS53TM-18GSCDM3-FL Mfr# 53TM-18GSCDM3-FL | Rev-A-Shelf 53TM 16-7/32" Gray 3-35 Quart Top-Mount Waste Pullout with Silver Bins and Soft-Close Slides, 53TM-18GSCDM3-FL | ||||
Sold in: 1 Each |  RS53TM-24GSCDM4-FL Mfr# 53TM-24GSCDM4-FL | Rev-A-Shelf 53TM 2-35 Quart and 2-8 Quart Top-Mount Waste Container with Silver Bins and Soft-Close Slides, 53TM-24GSCDM4-FL |
