Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf ML series appliance lift brings a heavy stand mixer up from a base cabinet to counter height at the pull of the door, using soft-close slides and a walnut-finished tray that adds a warm, finished look to the interior.
A stand mixer stored on the cabinet floor is hard to reach and awkward to haul onto the counter. This lift solves that by mounting inside a base cabinet and raising the mixer to a working position when the door opens. The mechanism is designed for the real weight of a loaded stand mixer, rated to 90 pounds, so it handles the appliance plus any attached accessories. The walnut tray rests under the mixer and stays visible when the lift is in use, making the interior look considered rather than utilitarian. When the job is done, the mixer goes back down and the cabinet door closes, keeping the countertop clear.
The lift mechanism is all metal, which gives it the structural rigidity to carry 90 pounds across thousands of cycles without flex or drift. The soft-close slides act on the lowering motion, slowing the descent at the end of travel so a fully loaded platform settles rather than drops. The walnut-finish tray is the finish detail that sets this variant apart from chrome or painted-metal options: it introduces a wood-grain visual that pairs naturally with wood cabinetry interiors and dark or warm kitchen palettes.
This lift suits kitchens where baking is frequent enough that leaving the mixer on the counter is not appealing, but pulling it in and out of a low cabinet is a real burden. It works well in custom kitchens, high-use home baking setups, and any renovation where both function and finish detail matter. The walnut tray makes it a particularly natural fit in kitchens with walnut, wood-tone, or warm-finish cabinetry interiors. Before ordering, confirm the base cabinet has at least 15 inches of clear width, 24-1/2 inches of clear height, and 23 inches of depth.
No. The lift operates independently and is not door-mounted. It raises and lowers manually, not by pulling the cabinet door.
The tray carries a walnut finish. The source data does not specify solid wood versus a veneer or laminate surface; confirm with the manufacturer if the exact substrate matters for your application.
It requires a minimum opening of 15 inches wide, 24-1/2 inches tall, and 23 inches deep. Measure your clear cabinet opening against all three dimensions before ordering, since the height and depth requirements can rule out shallower or shorter base cabinets.
The lift is rated to 90 pounds, which covers a full-size stand mixer with most standard attachments. If an unusual accessory load pushes the total weight close to or above 90 pounds, stay within the rating.
Choose this lift to keep a heavy stand mixer off the counter and within easy reach, with a walnut tray that adds a warm finish detail to the cabinet interior.
Sold In: 1 Each
