Pro Value Series outlet strip delivers two grounded sockets and two USB ports in one compact unit, so one strip can power tools while charging devices at the same location. The strip operates at 125 volts AC, 60Hz, which supports standard residential and shop power systems. Its 12 amp rating lets the strip serve typical bench tools, task lights, or chargers within that load. The two grounded sockets create a safer path to ground during normal use, which matters when working around wood dust and metal fixtures. Two USB ports rated at 1 amp each supply steady low-voltage power for phones or small electronics, reducing clutter from separate chargers. A 120 inch power cord extends reach from the power source to the work area, helping position the strip where it best serves the workflow.
The recess mount outlet strip is designed to set into a surface, which allows the front face with sockets and USB ports to remain accessible while the body sits within the mounting area. That layout keeps the electrical connection closer to the work zone while reducing exposed bulk around cabinets or benches. Operating at 125 volts AC and 60Hz, the strip matches typical circuit characteristics, so it works within those systems when the load does not exceed 12 amps. The grounded plug ties the strip to an existing receptacle, and the 120 inch cord allows the mounting point to be positioned away from the wall outlet while still drawing power safely.
This recess mount outlet strip suits projects where power and charging need to be built into a fixed location, because the sockets and USB ports stay flush to the mounting surface while still accessible. The two grounded sockets support standard plug-in equipment, which works well at workstations, under cabinets, or in fixed shop furniture situated near a 125 volt AC circuit. Two 1 amp USB ports supply dedicated low-voltage power for devices, keeping charging near the task area instead of across the room. The 120 inch cord gives flexibility to place the recess-mounted face where it helps workflow, while the grounded plug connects back to a standard outlet, joining the building ground path.
The 125 volts AC, 60Hz specification defines how this strip matches common North American electrical systems, so devices designed for that voltage and frequency operate as expected when used within the 12 amp limit. The 12 amp rating sets the maximum current for normal operation, guiding how many tools or fixtures can run from the two grounded sockets at once without exceeding that capacity. The grounded sockets and grounded plug maintain a continuous three-wire connection from equipment to the supply, which supports safer operation under typical cabinet and shop conditions. Each 1 amp USB port delivers controlled current for smaller electronics, so those devices charge through the strip while heavy loads stay on the main outlets.
The outlet strip is rated 125 volts AC, 60Hz, 12 amps, so it handles devices designed for those values within that current limit.
The strip has two grounded sockets, allowing two three-prong plugs to run from the same recess-mounted unit.
The two USB ports provide 1 amp each, supplying low-voltage power suited to charging smaller electronic devices near the work area.
The power cord is 120 inches long, giving extended reach from the wall receptacle to the recess-mounted location.
The outlet strip uses a grounded plug, connecting the strip and attached equipment to the building grounding system.
The manufacturer part number is 918PB2-SURF-2U, which identifies this specific Pro Value Series recess mount strip model.
The Pro Value Series outlet strip with two grounded sockets, two 1 amp USB ports, and a 120 inch cord brings power and charging to one recess-mounted point. With a 125 volts AC, 60Hz, 12 amp rating and grounded plug, it serves projects needing built-in power distribution within those limits. Using the 918PB2-SURF-2U part number helps match this exact configuration when planning multiple stations or repeat installations.
Sold In: 1 Each