PULL 224MM C/C, SATIN NICKEL FINISH describes a cabinet pull designed around an 8-13/16 inch center-to-center hole spacing, which lets it line up with matching drill patterns on cabinet doors and drawers. The pull length of 10 inches gives a longer gripping surface, useful on wider fronts where a compact knob offers less leverage. A projection of 1-1/16 inch sets the handle out from the face, providing finger clearance when opening heavier or loaded drawers. The 7/8 inch width gives a comfortable hand contact area, which matters during repeated daily use. The satin nickel finish presents a muted metallic surface, helping it blend with many contemporary and transitional cabinet finishes. The pull is part of the American Diner collection, so its retro-inspired design ties visually to other hardware from the same series on a job.
The center-to-center length of 8-13/16 inches defines the exact spacing between mounting points, which is critical when drilling new fronts or aligning with existing holes during replacements. With a 10 inch overall length, this pull extends slightly beyond the hole spread on each side, which produces a balanced look on mid-size and larger doors or drawers. The 1-1/16 inch projection determines how far it stands off the surface, which sets working clearance for fingers and helps limit contact with adjacent fronts. At 7/8 inch wide, the handle maintains a slim profile while still offering a defined gripping edge. The satin nickel finish over a zinc base delivers the American Diner collection styling, allowing this pull to match other pieces from the same design family on one project.
This Hickory Hardware American Diner Series pull with 8-13/16 inch center-to-center spacing fits layouts built around that specific mounting dimension, which is common on longer cabinet and drawer fronts needing a wider stance. The 10 inch length makes it suited to kitchen, bath, or shop cabinets where a longer handle proportionally matches taller doors or deep drawers. A projection of 1-1/16 inch gives enough stand-off for a comfortable grasp, which supports repeated opening in high-use locations such as base cabinets or pantry units. The satin nickel finish lets it visually coordinate with other satin nickel elements, so it can run across banks of cabinets without drawing uneven attention. As part of the American Diner collection, it supports retro-inspired design themes where consistent hardware styling across doors and drawers is important.
The specified 8-13/16 inch center-to-center measurement allows installers to base drilling jigs and templates on a precise value, which speeds layout and helps avoid misaligned holes across multiple fronts. Because the overall length is listed at 10 inches, planning reveals where the handle edges will land relative to panel edges or rail widths, aiding symmetrical positioning. The 1-1/16 inch projection gives a known standoff dimension, which helps anticipate clearance in tight runs near walls or adjacent cabinets. A width of 7/8 inch provides a defined face area, which influences how it covers existing marks when upgrading from a slimmer pull. The satin nickel finish and zinc construction from the American Diner collection keep the aesthetic and base material consistent under one part number P2158-SN, simplifying reorders for future matching work.
The P2158-SN pull has an 8-13/16 inch center-to-center measurement, so drilling or existing holes need to follow this spacing for a proper fit between mounting points.
The American Diner collection P2158-SN pull is 10 inches long, which gives extended grip length and a proportion suited to wider cabinet doors and drawers.
The satin nickel cabinet pull projects 1-1/16 inch from the surface, creating finger clearance and helping keep hands away from the cabinet face during opening.
The P2158-SN pull uses zinc as the base material with a satin nickel finish, giving it the American Diner collection look with a soft metallic appearance.
This Belwith Keeler pull is part of the Hickory Hardware American Diner collection, so its retro styling matches other pieces in the same series.
The P2158-SN cabinet pull has a width of 7/8 inch, which affects its visual weight on the door or drawer and the contact area for the hand.
This Hickory Hardware American Diner Series 8-13/16 inch center-to-center satin nickel pull combines a 10 inch length, 1-1/16 inch projection, and 7/8 inch width in a zinc construction. For projects using American Diner collection styling and this specific mounting spread, choosing the P2158-SN part number keeps cabinet faces, spacing, and finish coordinated across the run.
Sold In: 1 Each