PULL 160MM C/C Satin Nickel describes a Hickory Hardware American Diner Series pull with a 6-5/16 inch center to center hole spacing, so it lays out cleanly on cabinet doors and drawers using a common drilling pattern. The 7-1/2 inch overall length gives this pull a substantial hand grip across wider drawer fronts while still fitting well on standard cabinet doors. A 1-1/8 inch projection sets the handle away from the face of the cabinet, giving fingers clear room to pull without rubbing the door or drawer surface. The 7/8 inch width creates a comfortable contact area for everyday operation, which supports repeated use in busy kitchen or shop environments. The satin nickel finish provides a muted metallic look that coordinates with many hinge and appliance finishes, keeping hardware visually consistent across a project.
The 6-5/16 inch center to center measurement defines the screw hole spacing, so drilling can be done accurately using that fixed dimension on new or replacement fronts. With a 7-1/2 inch overall length, the pull spans enough surface to look balanced on medium to large cabinet faces, reducing the need to shift to multiple smaller pulls. The 1-1/8 inch projection establishes how far the grip stands off from the cabinet face, leaving working room for fingers even when nearby doors or trim are close. At 7/8 inch width, the pull occupies a modest stripe across the stile or rail, helping installers plan clearances from adjacent edges, moldings, or neighboring hardware layouts.
The Hickory Hardware American Diner Series 6-5/16 inch center to center satin nickel pull works on cabinet doors and drawers where the American Diner collection style is desired, tying together a crisp, clean and fun retro inspired hardware theme. Its longer size layout suits wider drawer fronts commonly found in base cabinets, allowing a single pull to span more of the face for a proportional appearance. In wall or tall cabinets, the 7-1/2 inch length provides a vertical grip area that can be easily reached at different heights, supporting consistent hardware across upper and lower runs. The satin nickel finish coordinates well anywhere other satin nickel decorative hardware and moldings are specified, helping designers keep finish choices aligned across handles and pulls from the Belwith product class.
The 6-5/16 inch center to center dimension, expressed as 160 mm C/C in the SAP description, gives installers a precise metric or imperial reference for drilling jigs, reducing layout variation between cabinets. The 7-1/2 inch overall length means the pull extends beyond the screw locations at both ends, spreading visual weight while keeping the mounting footprint tied to a single, known drill pattern. The 1-1/8 inch projection controls how far the hand moves away from the cabinet plane, which helps doors swing without knuckles contacting adjacent surfaces during use. With a 7/8 inch width, the pull presents a clear, tactile edge that users can grab reliably from different angles, which is useful on busy kitchen or workspace installations. The zinc material combined with the satin nickel finish supports a consistent feel from piece to piece across multiple cabinets, important when projects specify matching handles and pulls across many openings.
The P2156-SN pull has a 6-5/16 inch (160 mm) center to center dimension, so mounting holes can be laid out to that fixed spacing on cabinet doors and drawers.
The pull length is 7-1/2 inches, giving a longer grip that works well on wider drawer fronts and taller cabinet doors.
The American Diner pull projects 1-1/8 inches from the cabinet face, providing finger clearance between the handle and door or drawer surface.
The Hickory Hardware American Diner pull is made from zinc, giving a solid metal construction suitable for regular cabinet use.
The P2156-SN cabinet pull has a satin nickel finish, which provides a smooth, subdued metallic look that pairs with satin nickel decorative hardware.
This 160 mm center to center pull is part of the American Diner collection, inspired by classic diner tables and stools for a retro hardware style.
The Hickory Hardware American Diner Series 6-5/16 inch center to center satin nickel pull P2156-SN uses zinc construction, a 7-1/2 inch overall length, 1-1/8 inch projection, and 7/8 inch width to provide a defined, repeatable mounting footprint. For cabinet runs specified in satin nickel with a retro inspired look, these dimensions and the American Diner collection styling allow installers and fabricators to standardize drilling, maintain consistent grip feel across doors and drawers, and coordinate finishes across decorative hardware and moldings.