
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Aluminum handle 2 inch describes this Austere collection pull that delivers a short, straight-lined grip for compact cabinet fronts. The aluminum material creates a lightweight pull that adds minimal mass to doors and drawers, which matters when matching small hardware to light cabinet components. The aluminum finish pairs the material and surface tone, so what you see on the exterior reflects the same metal underneath, helpful when edges are visible on modern cabinet layouts. A 2 inch overall length keeps this pull tight to small drawer fronts, supporting clean layouts on narrow faces. The 1 inch center to center drilling dimension sets a fixed, close screw spacing, valuable when laying out holes on tight rails or narrow stile faces. A 5/8 inch projection moves the gripping edge slightly away from the cabinet surface, giving fingers enough clearance while keeping the profile low for a streamlined look.
The 1 inch center to center spacing on this aluminum cabinet lip pull sets the screw holes very close together, which benefits smaller drawer fronts or face frames with limited flat area. A 2 inch overall length then extends slightly past the mounting holes, giving a usable gripping span without reaching into adjacent fronts. The 3/8 inch width establishes a slim contact strip along the cabinet edge, so the pull occupies minimal vertical or horizontal face space in dense layouts. A 5/8 inch projection brings the gripping surface off the door or drawer plane just enough to catch fingers, while remaining close to the surface to preserve a low-profile appearance. Together, these dimensions support tight, consistent hardware placement on modern style cabinets that favor small, measured reveals.
The Austere collection lip pull design suits modern style cabinets, where straight lined and unobtrusive hardware supports flat-panel or minimal fronts. With 1 inch center to center spacing, this aluminum cabinet lip pull aligns with layouts that repeat compact drill patterns across multiple doors and drawers. The 2 inch overall length works on shorter drawer fronts or narrow doors, helping hardware stay proportionate instead of stretching across a large percentage of the panel. A 3/8 inch width gives the pull a slim footprint at the edge, useful when fronts sit close together and space between faces is tight. The aluminum finish coordinates with other aluminum-toned components, allowing a continuous visual line along a run of cabinetry. As a handle from Belwith Keeler in the Hickory Hardware Austere series, it slots into decorative hardware programs that rely on consistent sizing and appearance.
The fixed 1 inch center to center measurement on this C02H075744-AL handle lets jigs or drilling templates repeat the same pattern on every cabinet front, which supports efficient shop or onsite workflows. The short 2 inch length means fronts with limited width can still follow the same hole spacing without crowding edges or neighboring pulls. A 5/8 inch projection defines how far the lip stands off the surface, so door and drawer clearances can be planned around a known profile rather than estimating. The 3/8 inch width helps the pull avoid contact when two fronts open past each other near corners, since the hardware adds only a narrow band at the edge. Built in aluminum with an aluminum finish, the pull maintains one metal type throughout its body and surface, which matters when exposed edges or ends are visible on open cabinets. These combined details give installers predictable results when repeating the handle across a full kitchen or casework run.
The Austere collection offers lip pulls with straight lined, unobtrusive shapes, which supports modern style cabinets that rely on simple, linear hardware instead of ornate profiles.
The aluminum handle has a 2 inch length, so it suits short drawer fronts or tight cabinet sections where compact pulls prevent crowding at edges or between adjacent fronts.
This aluminum cabinet lip pull has a 1 inch center to center dimension, which sets a close screw spacing for drilling layouts on narrow rails or small faces.
The pull projects 5/8 inch from the cabinet surface, which provides finger clearance for gripping while keeping the profile low against the door or drawer front.
The handle has a 3/8 inch width, so it occupies a slim strip along the cabinet edge and maintains a narrow visual line on modern cabinet fronts.
The C02H075744-AL handle is a Belwith Keeler product in the Hickory Hardware Austere series, which identifies it within their decorative hardware and pulls lineup.
This Hickory Hardware Austere series 1 inch center to center aluminum pull offers a compact 2 inch length, 3/8 inch width, and 5/8 inch projection, giving installers defined dimensions for consistent layouts. The aluminum material and aluminum finish tie appearance and construction together, supporting modern style cabinets. At Wurth Baer Supply, this Belwith Keeler handle aligns with decorative hardware and moldings needs where repeatable hole spacing and a low-profile lip pull are important. Add this Austere aluminum cabinet lip pull when your project calls for a small, straight-lined handle that fits tight faces and supports clean, modern runs.
Sold In: 1 Each