Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Wisteria pull is a decorative cabinet handle designed for contemporary residential cabinets, so it serves as a visible upgrade where older hardware looks out of place. The Wisteria collection identity ties this pull to a coordinated design family, which matters when multiple rooms or banks of cabinets need the same visual language. The satin nickel finish gives the pull a muted metallic appearance, which helps it sit comfortably against a wide range of cabinet colors without dominating the door or drawer face. The pull uses a center to center dimension of 3-3/4 inches, also described as 96 mm, so it aligns with common drilling patterns found in many existing cabinets. This 96 mm spacing allows straightforward replacement of older pulls that share the same hole spread, limiting extra work on finished surfaces.
The specified center to center value of 96 mm controls where mounting holes must be drilled, which is critical when aligning this pull with either new layouts or existing pairs of holes in cabinet faces. This 96 mm spacing corresponds directly to the 3-3/4 inch description, so installers can work in either metric or imperial when laying out hole positions. The projection of 1-1/16 inches then defines how far the pull stands off the door or drawer surface, which affects both ergonomics and the clearance needed above adjacent trim or faces. With an overall length of 4-5/8 inches, the pull spans slightly beyond the mounting points, providing a defined gripping zone that helps doors and drawers open with a consistent feel across multiple cabinets.
This satin nickel cabinet pull from the Wisteria collection is suited to cabinet doors and drawers that accept a 3-3/4 inch, or 96 mm, center to center layout, because that dimension dictates where the mounting points land on the face. In residential settings where contemporary styling is desired, the satin nickel finish provides a low-gloss metallic look, which works well on both light and dark cabinet finishes without heavy visual contrast. The overall length of 4-5/8 inches allows this Belwith Keeler pull to sit comfortably on standard-sized doors and many drawer fronts, giving enough presence to act as a handle without overwhelming moderate cabinet rail widths. Because the pull belongs to the Wisteria collection, it can visually coordinate with other hardware pieces that share that collection identity, supporting consistent design across adjoining cabinets.
The 96 mm center to center dimension supports repeatable drilling patterns, so installers can use templates or jigs based on this common spacing across an entire run of cabinets. The 1-1/16 inch projection establishes a fixed stand-off from the cabinet face, providing predictable finger clearance behind every pull installed at the same height line. With a width of 3/8 inch, this pull presents a relatively slim front profile, which helps maintain an even look when multiple pulls are aligned across banks of drawers or doors. The zinc material under the satin nickel finish offers a consistent substrate for that surface treatment, contributing to a uniform appearance from piece to piece on large jobs. The manufacturer designation HH74636-SN clearly identifies this specific satin nickel variant within the Wisteria line, which aids in reordering the same pull style when projects expand or additional cabinets are added later.
The HH74636-SN pull uses a 3-3/4 inch, or 96 mm, center to center spacing, so the two mounting points are set at that distance for layout and drilling.
The Belwith Keeler Wisteria pull has an overall length of 4-5/8 inches, giving a grip area that extends slightly beyond each mounting point on the cabinet face.
This cabinet pull is made from zinc with a satin nickel finish, so it presents a soft metallic appearance over a consistent base metal.
The HH74636-SN pull projects 1-1/16 inches from the cabinet surface, providing space for fingers to wrap behind the handle.
This satin nickel pull has a width of 3/8 inch, creating a slim profile that affects how it appears visually on cabinet fronts.
The HH74636-SN cabinet pull belongs to the Wisteria collection, aligning it with other decorative cabinet hardware in the same design family.
This satin nickel cabinet pull from the Belwith Keeler Wisteria collection pairs a 96 mm center to center layout with a 4-5/8 inch overall length, which suits many cabinet doors and drawers that follow this common spacing. The 1-1/16 inch projection and 3/8 inch width define how it feels in hand and how it presents across a full installation. For projects calling for zinc-based pulls with a satin nickel finish under the part number HH74636-SN, this handle provides a consistent, contemporary option.
Sold In: 1 Each