Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Wisteria pull gives cabinets and drawers a contemporary satin nickel look that ties modern decor together. The pull delivers a 5-1/16 inch, or 128 mm, center to center mounting span, so it bridges standard handle drillings on many cabinet layouts while keeping lines visually clean. Its satin nickel finish provides a muted metallic surface that coordinates with other nickel-finished decorative hardware in the same space. The pull belongs to the Wisteria collection, so matching pieces can follow the same design language throughout a room. Material construction in zinc creates a solid-feeling handle body that supports repeated daily opening and closing on busy kitchen or bath installations. Overall length of 6 inches presents a longer visual bar across the front of the door or drawer face, which helps balance wider fronts while leaving enough clearance at each end for comfortable grasping.
The 5-1/16 inch (128 mm) center to center measurement defines the exact distance between mounting holes, guiding drilling or jig placement so rows of pulls line up cleanly across multiple doors and drawers. A projection of 1-1/16 inch sets the pull away from the cabinet face, giving enough clearance behind the bar for fingers to wrap comfortably without contact against the door or drawer surface. The pull width of 3/8 inch keeps the front profile slim, which helps it sit neatly on narrow rails or smaller drawer fronts while still giving a defined edge to grip. With a full 6 inch length, the pull covers more of the front panel, which can help visually center hardware on wider faces and support consistent spacing when multiple pulls are used side by side.
This satin nickel cabinet pull fits projects calling for contemporary decorative cabinet hardware and moldings where a clean bar-style handle suits the layout. The Wisteria collection identity connects the pull to other pieces in the same series, which helps build a consistent look on kitchen, bath, or built-in cabinetry. Its 128 mm center to center dimension aligns with a widely used metric drilling standard, which supports updating existing cabinets that already use that spacing with a fresh satin nickel style. On new construction, the 5-1/16 inch center to center figure guides layout across banks of drawers so hardware falls in the same relative position from cabinet to cabinet. The 6 inch length and 3/8 inch width make the pull suitable for both doors and drawers in the same room, so installers can carry one handle style across multiple cabinet sizes.
The 128 mm center to center span gives installers a precise dimension to set up drilling guides, which saves layout time and helps every pull land straight and level across a long run of cabinets. The 1-1/16 inch projection controls how far the bar stands off the face, which keeps pulls from feeling crowded against the cabinet while still staying close enough to avoid catching on nearby edges. A slim 3/8 inch width produces a streamlined look that lines up neatly on narrow stiles, allowing rows of handles to sit evenly without overpowering small fronts. The zinc material helps the pull maintain its shape at the mounting points, which supports firm fastening to the door or drawer front. With a satin nickel finish, the visible surfaces of the handle present a uniform appearance that coordinates with other satin nickel cabinet components, helping finished installations look cohesive from one cabinet run to the next.
The Hickory Hardware Wisteria pull has a 5-1/16 inch, or 128 mm, center to center measurement, which sets hole spacing and helps align new or replacement handles across cabinet fronts.
The pull length is 6 inches, giving a substantial bar across the door or drawer that supports a comfortable hand grip and scales well on wider cabinet fronts.
The pull is made from zinc, providing a solid handle body that stands up to repeated opening and closing on everyday cabinet installations.
The projection is 1-1/16 inch, setting the distance from the cabinet face to the front of the pull so fingers clear the surface comfortably.
The HH74632-SN pull uses a satin nickel finish, giving the handle a soft metallic look that coordinates with other satin nickel decorative hardware in the space.
This pull is part of the Wisteria collection by Hickory Hardware and is branded under Belwith Keeler, tying it to an established decorative cabinet hardware line.
The Hickory Hardware Wisteria pull combines a 128 mm center to center span, 6 inch overall length, and 1-1/16 inch projection to support clean cabinet layouts in satin nickel. With zinc construction and a Wisteria collection profile, it suits projects calling for consistent contemporary hardware styling. Choosing this HH74632-SN pull lets installers and serious DIY users coordinate decorative cabinet hardware across doors and drawers with one proven satin nickel design.
Sold In: 1 Each