Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Mito pull gives cabinets and furniture a contemporary look using a satin pearl finish and clean lines, which helps tie modern room elements together on doors and drawers. The pull is part of the Mito collection, so it follows a consistent contemporary design language that works across a project where matching hardware is important. The pull uses aluminum construction, providing a solid feel while keeping weight manageable on cabinet fronts. A 5-1/16 inch (128 mm) center to center dimension sets precise hole spacing, which matters when laying out new drilling patterns or lining up with existing ones. Overall length of 5-1/4 inch creates a comfortable grip area for regular daily use. A projection of 1-1/4 inch and width of 1/2 inch set the stand-off and hand clearance from the door surface, which helps with easy grabbing and reduces knuckle contact on typical cabinet faces.
The 5-1/16 inch (128 mm) center to center dimension on this Mito pull establishes the mounting hole spacing, which is critical when matching or drilling cabinet fronts on a new or retrofit job. Because this spacing is expressed in both inches and 128 mm, it works within common European and North American layout practices on line-bored or custom-drilled cabinets. The 5-1/4 inch overall length extends slightly beyond the drilling points, which frames the mounting area and affects how close pulls can sit on narrower drawer fronts. With a projection of 1-1/4 inch, the pull stands off enough to get fingers behind the bar without crowding, which helps on thicker doors and drawer fronts. The 1/2 inch width creates a slim look while still giving a defined edge to pull against, which supports a confident grip during repeated opening and closing cycles.
The Mito collection design positions this pull as a straightforward choice for contemporary cabinet and furniture runs, which matters when upgrading doors and drawers in kitchens, baths, or built-ins that lean modern. The satin pearl finish brings a muted metallic look, which helps hardware sit comfortably next to other satin finishes in hinges, faucets, or lighting without drawing excessive attention. Aluminum construction keeps each pull lighter than many solid metal options, which can be helpful on large doors or wide drawers where several pulls or heavier fronts are involved. With its 5-1/4 inch overall length and slim 1/2 inch width, the pull presents a streamlined profile that works on both smaller doors and larger drawer fronts, giving installers flexibility to repeat one size across different cabinet widths. The 5-1/16 inch (128 mm) center to center size aligns with a widely used mounting standard, which helps when working on projects that follow metric drilling systems or when planning consistent spacing line to line.
The defined 5-1/16 inch (128 mm) center to center spacing on this pull gives a precise drilling target, which supports accurate jig setup and consistent hole placement across a full bank of cabinets. The slight difference between overall length at 5-1/4 inch and the center to center distance frames the mounting screws with a small overhang, which can visually center the pull on rail and stile proportions. A projection of 1-1/4 inch controls how far the grip stands from the face of the cabinet, which affects how drawers clear surrounding trim and how fingers access the pull from above or below. The 1/2 inch width keeps the touch surface narrow, which can help maintain a minimalist look on flat-panel doors while still presenting a defined edge to pull against. Together, these fixed dimensions help installers repeat layout, keep reveals balanced around hardware, and achieve straight visual lines across multiple doors and drawers.
The Hickory Hardware Mito pull has a 5-1/16 inch (128 mm) center to center size, which sets the exact drilling distance for mounting on cabinet doors and drawers.
The P3694-SP Mito pull has an overall length of 5-1/4 inch, which defines its footprint on the cabinet face and helps with spacing between adjacent pulls.
The Hickory Hardware Mito pull is made from aluminum, which keeps the hardware lightweight while still giving a solid feel on cabinet doors and drawers.
This 128 mm center to center pull has a satin pearl finish, which provides a soft metallic appearance suited to contemporary cabinet and furniture designs.
The Mito collection pull projects 1-1/4 inch from the cabinet face, which sets hand clearance for gripping and affects how far the hardware stands off the door.
This modern cabinet handle has a 1/2 inch width, which creates a slim profile on the door while still giving a defined edge for fingers to pull against.
This Hickory Hardware Mito pull pairs a 5-1/16 inch (128 mm) center to center layout with a 5-1/4 inch overall length, which suits many contemporary cabinet and furniture applications needing that drilling size. Aluminum construction and a satin pearl finish deliver a modern look that aligns with the Mito collection styling, helping projects maintain a coordinated appearance across doors and drawers. With defined dimensions for projection and width, this pull offers predictable clearance and a slim profile on the cabinet face. For projects calling for 128 mm center to center spacing in a contemporary satin pearl look, this Mito pull provides a clear, measured option.
Sold In: 1 Each