Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Somerset collection black nickel pull from Hickory Hardware gives cabinets and drawers a defined, decorative grip that updates their look in one step. The pull uses a 5-1/16 inch (128 mm) center to center size, so it spans standard drill spacing on many cabinet layouts and helps maintain straight, consistent alignment across a run of doors or drawers. Its overall length of 5-13/16 inches provides comfortable hand clearance when operating doors and drawers in busy kitchen or shop environments. A projection of 1-1/4 inches stands the pull off the front of the cabinet enough for fingers to wrap naturally around the profile. The 13/16 inch width creates a visible, architectural line on the face of the cabinet that supports the Somerset collection design statement.
This Hickory Hardware Somerset series pull is specified with a 5-1/16 inch (128 mm) center to center distance, which sets the hole spacing for mounting onto cabinet doors or drawers. That center to center measurement lets installers plan consistent drilling patterns across multiple cabinets when laying out new construction or remodeling work. With a 5-13/16 inch overall length, the pull extends beyond the hole centers at each end, covering the mounting points while presenting a balanced look on medium to large fronts. The 1-1/4 inch projection provides the standoff required for comfortable gripping without crowding the door edge, supporting smooth operation on cabinets that see frequent opening and closing.
The Somerset collection pull, part number HH74638-BNV, suits cabinet and drawer faces where a 5-1/16 inch (128 mm) center to center layout is specified. On kitchen or bath cabinetry built around that spacing, the pull installs into appropriately spaced holes and provides a consistent hardware line across banks of drawers or doors. The 5-13/16 inch overall length lets this pull sit comfortably on wider drawer fronts while still looking proportionate on many door sizes within typical residential cabinet runs. With a 1-1/4 inch projection, the pull supports use on upper and lower cabinets because hands can grip from above or below without the handle sitting too close to the face. The 13/16 inch width means the pull reads clearly even on visually busy wood grains, so the Somerset design can define the cabinet style. The black nickel vibed finish supports projects that need a darker, refined tone that relates to other dark or nickel-finished decorative hardware and moldings in the same room.
The 5-1/16 inch (128 mm) center to center measurement on this Hickory Hardware Somerset pull lets installers work directly from the dimension, speeding repetitive drilling on production cabinet jobs that repeat the same spacing. That consistent measurement also aids replacement work where old hardware used the same spread, helping the new pull align with existing holes. The zinc material used in the pull body keeps the handle feeling solid during operation, supporting regular opening and closing cycles on often-used doors and drawers. Its 1-1/4 inch projection gives fingers room to grab from different angles, supporting use on corner cabinets where approach angles vary. The 13/16 inch width provides enough surface area for a steady pull, which helps control heavier drawer boxes or loaded base cabinets. The black nickel vibed finish helps the handle visually integrate into decorative hardware and moldings, tying door and drawer fronts into a single design line along a run of cabinetry.
The Hickory Hardware Somerset pull HH74638-BNV has a 5-1/16 inch (128 mm) center to center distance, so hole spacing follows that dimension during layout or replacement work.
The Somerset collection black nickel pull measures 5-13/16 inches in overall length, giving coverage beyond the mounting holes and a proportion suited to many cabinet doors and drawers.
The HH74638-BNV Hickory Hardware pull has a 1-1/4 inch projection, creating stand-off from the cabinet face for comfortable gripping and finger clearance.
The Somerset collection pull is made from zinc, providing a solid-feeling handle that supports routine cabinet and drawer operation in decorative hardware applications.
The HH74638-BNV pull uses a black nickel vibed finish, giving a dark, reflective appearance that coordinates with other black or nickel decorative hardware pieces.
This Somerset series cabinet pull is from Hickory Hardware, with the brand listed as Belwith Keeler, tying it into their decorative handles and pulls product class.
The Hickory Hardware Somerset series 5-1/16 inch (128 mm) center to center black nickel vibed pull HH74638-BNV brings a defined, decorative grip to cabinets and drawers where that spread is specified. With zinc construction, a 5-13/16 inch overall length, 1-1/4 inch projection, and 13/16 inch width, it supports daily use while presenting the Somerset collection profile. For projects built around decorative handles and pulls in a dark nickel tone, this Belwith Keeler cabinet pull offers a clear dimension set that aligns with common cabinet drilling layouts.
Sold In: 1 Each
