Hickory Hardware Cottage Series pull is a 3 inch center to center cabinet pull in a stainless steel finish that works on both drawers and cabinets. The pull belongs to the Cottage collection, so it maintains a consistent style across projects where that collection is already in use. The stainless steel finish on this zinc pull presents a neutral look that pairs with many cabinet colors in bathrooms or bedrooms. The pull length of 3-7/16 inches gives enough hand contact for everyday opening and closing without taking excessive front space on narrower fronts. A projection of 1-3/16 inches provides finger clearance from the cabinet face, which helps reduce knuckle contact on thicker doors. The width of 7/16 inch keeps the profile visually light while still giving a defined edge to grab during regular use.
The 3 inch center to center measurement on this Belwith Keeler pull defines the distance between mounting holes, so existing 3 inch layouts can be reused without redrilling when swapping older hardware. The 3-7/16 inch overall length gives a clear reference for edge spacing, helping installers position the pull consistently relative to door and drawer edges. With a projection of 1-3/16 inches, the pull stands off the surface at a predictable distance, which is important when aligning across doors and drawers so all hardware sits at the same depth. The 7/16 inch width offers a narrow footprint, which helps keep adequate material on either side of the drilled holes on thinner or narrow stile applications.
This Belwith Keeler Hickory Hardware Cottage Series pull is designed for use on drawers or cabinets, so it suits both door and drawer fronts in bathrooms or bedrooms. The 3 inch center to center layout matches a common drilling standard, which makes this pull practical for updating existing cabinets already bored at 3 inches. Because the finish is stainless steel on a zinc pull, it visually connects with stainless steel finish fixtures, helping maintain a consistent look across faucets, hinges, and other visible hardware in a room. The Cottage collection styling ties together casework where other Cottage pieces are already installed, which supports cohesive design across vanities, dressers, or built-in storage. The 3-7/16 inch length and 1-3/16 inch projection give users a familiar size that works well on medium-width drawer fronts typically found in these spaces.
The 3 inch center to center measurement gives a repeatable drilling pattern, so multiple pulls can be installed in straight lines across cabinet runs without constant recalculation. The 3-7/16 inch overall length offers a predictable overhang beyond the mounting holes, which helps align end distances from stile edges for a uniform visual reveal. The 1-3/16 inch projection provides consistent stand-off, allowing rows of pulls to sit at the same depth on doors and drawers, which supports clean sightlines on finished cabinetry. The 7/16 inch width concentrates the mounting area in a relatively narrow band, which keeps hole placement centered on many standard drawer rail heights. Belonging to the Cottage collection also gives a named reference point, helping specifiers call out the same style across multiple cabinet lines or room phases. The stainless steel finish noted in the description provides a reliable finish spec so the pull can be matched with other stainless steel finish components in project documentation.
The pull has a 3 inch center to center dimension, which sets the spacing between mounting holes for alignment on cabinet doors and drawer fronts.
The P3382-SS pull has a length of 3-7/16 inches, a projection of 1-3/16 inches, and a width of 7/16 inch, giving a compact footprint on cabinet fronts.
The pull is made from zinc with a stainless steel finish, combining a sturdy base material with a stainless look that coordinates with similar finish hardware.
The pull is described for use on drawers or cabinets in bathrooms or bedrooms, supporting a consistent look across various residential casework in those areas.
The 1-3/16 inch projection sets the pull off the cabinet face, giving finger clearance that helps users grip the handle comfortably during everyday opening and closing.
Being part of the Cottage collection means its design coordinates with other Cottage hardware, helping maintain a unified style when used across multiple cabinets.
The stainless steel finish cabinet pull with 3 inch center to center spacing, identified as manufacturer part P3382-SS, offers a defined set of dimensions that support consistent cabinet layouts. The 3-7/16 inch length, 1-3/16 inch projection, and 7/16 inch width give a known profile when planning handle spacing on drawers and doors. As a Belwith Keeler Hickory Hardware Cottage Series pull made from zinc with a stainless steel finish, it aligns with the Cottage collection description for use on drawers or cabinets in bathrooms or bedrooms. For projects calling for a 3 inch Cottage collection handle in a stainless steel finish, this pull provides a clearly specified option.