Hickory Hardware Cottage pull gives you a 3-3/4 inch (96 mm) center to center handle that works on drawers or cabinets in bathrooms or bedrooms, so one style can tie multiple areas together. The pull belongs to the Cottage collection by Hickory Hardware, which is described as versatile and elegant, so it suits a wide range of decorative hardware projects. The satin nickel finish provides a consistent, contemporary look, so it coordinates with other satin nickel cabinet hardware across a room. A length of 4-1/4 inches gives you a defined gripping area, which helps when opening wider or heavier drawer fronts. The projection of 1-1/4 inches creates hand clearance from the cabinet face, which supports comfortable everyday use. A width of 7/16 inch keeps the profile slim, which can be useful when handles sit close to adjacent doors or appliances.
The 96 mm center to center drilling dimension defines where to position mounting holes, so installers can line up this pull accurately on cabinet doors and drawer fronts. The combination of 3-3/4 inch center to center and 4-1/4 inch overall length leaves a small overhang beyond the screw locations, which helps with visual alignment along door rails or drawer edges. A projection of 1-1/4 inches keeps the hand away from the cabinet face when pulling, which can reduce knuckle contact with raised panels or trim. With a narrow 7/16 inch width, this pull fits comfortably on narrower rails or small drawer fronts, so it can be used across different cabinet sizes within the same job.
The Cottage collection by Hickory Hardware is described as one of its most adaptable collections, so this pull works in bathrooms, bedrooms, or other residential cabinets that need a consistent style. Because this pull can be used on drawers or cabinets, it can carry the same satin nickel look across sink bases, linen cabinets, bedside storage, or built-ins. The satin nickel finish provides a unified appearance with other satin nickel decorative hardware and moldings, which helps keep hardware choices consistent in open-plan spaces. A 4-1/4 inch long handle on a 96 mm center to center layout suits many standard cabinet widths, so installers can repeat this part number across banks of drawers or multiple doors. Supplied screws allow direct mounting through the cabinet front into the threaded posts, so installers can move efficiently from one opening to the next without searching for separate fasteners.
The 96 mm center to center measurement on this pull provides a clear drilling reference, which is helpful when setting up jigs or templates for repetitive cabinet work. Because the pull can match existing 96 mm hole patterns, it can replace older handles while keeping the same mounting locations, which streamlines refresh projects without filling and redrilling. The modest 1-1/4 inch projection keeps hardware from extending too far into walkways, which matters on cabinets near tight hallways or appliance fronts. A narrow 7/16 inch width concentrates the design in a compact footprint, allowing installers to maintain edge clearances on small fronts while still giving users a defined grip point. The satin nickel finish ties into modern and transitional designs, so this same part number can be specified on multiple jobs where clients request satin nickel cabinet pulls. The material construction in zinc provides a substantial feel when gripped, which supports a consistent user experience across every door and drawer fitted with this pull.
The Hickory Hardware Cottage pull uses a 3-3/4 inch (96 mm) center to center dimension, which guides drilling layout for accurate mounting on cabinet doors and drawer fronts.
The P3381-SN pull has a length of 4-1/4 inches and a width of 7/16 inch, providing a defined gripping area while keeping a slim profile on cabinet fronts.
The Belwith Keeler P3381-SN pull projects 1-1/4 inches from the surface, creating finger clearance for comfortable opening and closing of doors and drawers.
This Cottage collection pull can be used on drawers or cabinets in bathrooms or bedrooms, supporting a consistent satin nickel look across different storage locations.
The pull is made from zinc with a satin nickel finish, giving it a solid feel and a neutral metallic appearance that coordinates with satin nickel cabinet hardware.
The manufacturer part number for this drawer and cabinet pull is P3381-SN, which identifies this specific Cottage collection satin nickel model for ordering or repeat projects.
The Hickory Hardware Cottage pull in satin nickel, part number P3381-SN, combines a 96 mm center to center layout with a 4-1/4 inch length to suit many cabinets and drawers. With zinc construction, satin nickel finish, and a 1-1/4 inch projection, it delivers consistent sizing and appearance across projects. Choosing this Cottage collection pull through Wurth Baer Supply allows hardware decisions to align with defined dimensions and a known Belwith Keeler design, so cabinet work proceeds with a clear, repeatable handle specification.