Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Manor House bail pull from Belwith Keeler gives cabinets a decorative handle that recalls traditional styling while fitting standard modern drilling. The 3-1/2 inch (89 mm) center to center dimension aligns with common cabinet hole patterns, so it works as a direct handle location on many doors and drawers. The pull uses a bail design, so the ring-style handle hangs between two rosettes, giving a period-inspired look that still functions as a practical grip. Zinc material forms the body of the pull, providing a solid metal part for everyday opening and closing in kitchen, bath, or built-in projects. The Silver Stone finish covers the zinc, so the surface presents a consistent silver tone that coordinates with other Silver Stone hardware in the same space. Length of 4-1/8 inch and width of 1-3/4 inch give the pull a visible presence across the cabinet face without overwhelming smaller fronts.
The 3-1/2 inch (89 mm) center to center drilling dimension on this bail pull defines the hole spacing needed in the cabinet, so installers can plan boring operations or align with existing 3-1/2 inch holes during replacement work. With an overall length of 4-1/8 inch, the pull extends slightly past the drilling, giving coverage around the mounting posts and helping visually frame the handle location on doors and drawers. The measured width of 1-3/4 inch sets how tall the pull appears on the face, which affects how it fits between rails or along narrow drawer fronts. Projection of 3/8 inch keeps the hardware close to the surface, so the handle does not extend far into the room, which can matter on cabinets facing walkways. The Silver Stone finish over the zinc base identifies the appearance, allowing this bail pull to stay visually consistent when paired with other Silver Stone hardware on the same project.
The Hickory Hardware Manor House bail pull with 3-1/2 inch center to center dimension fits cabinet layouts that follow this common drilling size, so it suits doors and drawers built around 89 mm handle spacing. On face-frame or frameless cabinets, the 4-1/8 inch overall length allows the pull to span across typical drawer fronts or door rails without extending to the edges, which helps keep visual balance in residential kitchens and baths. The 1-3/4 inch width allows placement on narrower rails where very tall hardware could crowd panel profiles. Silver Stone finish makes the pull a match for projects that specify a silver-toned hardware palette, tying together cabinet handles, knobs, and related decorative hardware. Because the pull is part of the Manor House collection, it can be selected where a cohesive collection look is desired across multiple cabinet locations.
The defined 3-1/2 inch (89 mm) center to center dimension on the P3477-ST bail pull gives installers a fixed drilling measurement, supporting repeatable boring setups across multiple doors and drawers in a run. Using the specified 4-1/8 inch length as a reference helps with layout decisions, such as centering the pull on drawer fronts while maintaining uniform reveals from neighboring hardware. The 1-3/4 inch width helps determine vertical positioning relative to panel details, so pulls can be placed consistently above or below rails without crowding decorative profiles. A 3/8 inch projection keeps the handle profile shallow, which can help when aligning hardware across cabinets that open toward each other, reducing the chance of handles contacting one another during operation. Zinc construction listed for this pull means all locations using the P3477-ST share the same base metal, supporting consistent drilling resistance and fastening behavior throughout the project. The Silver Stone finish specification ensures that multiple pulls installed side by side present a uniform surface color, supporting a clean, coordinated appearance in finished cabinetry.
The P3477-ST bail pull has a 3-1/2 inch (89 mm) center to center measurement, so the mounting holes are spaced to match 3-1/2 inch cabinet handle drilling layouts.
This Manor House bail pull measures 4-1/8 inch in overall length, so it extends slightly beyond the 3-1/2 inch mounting centers on each side of the cabinet drilling.
The cabinet bail pull is made from zinc with a Silver Stone finish, giving a metal base part with a silver-toned surface for coordinating decorative hardware.
The Manor House pull projects 3/8 inch from the cabinet surface, so the handle stays relatively low profile while still providing finger clearance at the grip area.
The P3477-ST bail pull is 1-3/4 inch wide, setting the vertical footprint on the door or drawer and helping plan placement relative to rails and panel details.
This Silver Stone bail pull is part of the Manor House collection from Hickory Hardware, allowing it to align visually with other pieces from the same collection.
The Hickory Hardware Manor House bail pull in Silver Stone combines a 3-1/2 inch (89 mm) center to center size with defined length, width, and projection dimensions, giving clear layout information for cabinet planning. Zinc construction and the specified Silver Stone finish provide a consistent material and appearance choice across doors and drawers. When a project calls for a 3-1/2 inch center to center decorative bail pull with a Manor House collection look, the P3477-ST gives installers a known part number and measured profile to work into drilling, alignment, and visual design decisions.