Hickory Hardware Williamsburg pull gives cabinets and drawers a straightforward handle that suits many residential spaces. The pull is part of the Williamsburg collection, so its style aligns with other pieces in the same family, which helps when carrying one look across a room. The pull has a 3-3/4 inch, or 96 mm, center to center dimension, creating a standard hand grip that works well on typical cabinet doors and storage drawers. Overall length is 4-1/8 inches, so the pull covers the screw locations with some overhang, which matters when matching proportions on face frames or drawer fronts. The satin nickel finish adds a muted metallic surface that fits projects calling for a soft, brushed look rather than a bright polish. The pull is made from zinc, giving a solid metal component that handles normal cabinet opening and closing in everyday use.
This P3051-15 satin nickel pull uses a 3-3/4 inch, or 96 mm, center to center measurement between mounting points, so hole locations can be laid out using that fixed spacing on every cabinet door and drawer. The 4-1/8 inch overall length means the pull extends slightly beyond the mounting points, which keeps the grip centered visually even when rails vary slightly in width. With a projection of 1-1/4 inches, the pull stands off the face enough to get fingers behind the bar while keeping doors and drawers close to the cabinet frame. The 1/2 inch width keeps the front profile narrow, suiting smaller fronts where space around neighboring fronts is limited.
The Hickory Hardware Williamsburg series 3-3/4 inch center to center satin nickel pull suits cabinet doors and drawers that follow a standard 96 mm drilling pattern, so it works across many kitchen, bath, or den storage layouts using that spacing. Its 4-1/8 inch length keeps the pull proportionate on medium-size fronts, which is useful on typical base cabinets and wall cabinets with similar rail dimensions. The satin nickel finish supports projects seeking a neutral metal tone that coordinates with many hinge and faucet finishes described as satin nickel. The Williamsburg collection is described as versatile and adaptable to multipurpose rooms and den storage drawers, which means this same pull style can extend from workspace cabinets into more finished living areas without breaking the visual theme.
The 96 mm center to center measurement on this Belwith Keeler cabinet pull sets a repeatable drilling reference, which simplifies layout when multiple installers are working down long cabinet runs. When every pull shares a 3-3/4 inch spacing, jigs or templates based on this pull can be reused across doors and drawers, which reduces layout variation between bays. The 1-1/4 inch projection creates a predictable stand-off from the cabinet face, which helps when aligning pulls across doors opposite each other so grips sit at the same distance from edges. With a 1/2 inch width, the pull occupies minimal face area, which is helpful around narrow stile designs where pulls need to clear panel details. The zinc material gives a consistent metal body, so weight and feel remain the same from one front to the next, which maintains a uniform user experience across the entire installation.
The Hickory Hardware Williamsburg pull has a 3-3/4 inch, or 96 mm, center to center spacing, so drilling and templates can follow that measurement across cabinet doors and drawers.
The P3051-15 satin nickel pull measures 4-1/8 inches in overall length, which slightly exceeds the 3-3/4 inch mounting span to cover the holes and balance the visual footprint.
This Belwith Keeler cabinet pull has a 1-1/4 inch projection, moving the grip forward from the door or drawer face to create clearance for fingers when opening fronts.
The Williamsburg series cabinet pull is 1/2 inch wide, giving a slim front edge that suits narrower rails and smaller drawer faces where a compact footprint is preferred.
This 96 mm center to center pull is made from zinc, providing a solid metal component to handle common cabinet opening and closing throughout daily household use.
The Williamsburg satin nickel cabinet pull has a satin nickel finish, offering a subdued metal sheen that coordinates with hardware and fixtures using similar satin nickel tones.
The Hickory Hardware Williamsburg series 3-3/4 inch (96 mm) center to center satin nickel pull combines a known 96 mm drilling pattern, a 4-1/8 inch length, and a 1-1/4 inch projection to support consistent cabinet layouts. Its zinc construction and satin nickel finish create a straightforward metal pull suited to kitchens, baths, multipurpose rooms, and den storage using this spacing. For projects calling for a Belwith Keeler cabinet pull with these exact dimensions and finish, this P3051-15 model aligns with those requirements.