Hickory Hardware Williamsburg pull is a zinc cabinet handle designed for practical cabinet and drawer use where a simple, adaptable style is needed. The pull has a 3-3/4 inch center to center dimension, so it spans standard 96 mm hole spacing that installers commonly encounter on residential cabinet doors and drawers. The overall length of 4-1/8 inch provides enough hand contact area to comfortably open cabinets in a multipurpose room or storage area. A projection of 1-1/4 inch spaces the gripping surface off the face of the door, giving fingers room to pull without scraping knuckles against the cabinet front. The 1/2 inch width keeps the profile visually light on smaller fronts while still offering a defined edge to grab. The oil rubbed bronze highlighted finish produces a dark base tone with lighter highlighted areas, supporting projects that call for traditional or transitional styling. The pull is part of Hickory Hardware's Williamsburg collection, which offers a versatile style that works across different rooms in a home.
The 3-3/4 inch center to center measurement defines the distance between mounting holes, so it aligns with standard 96 mm bored holes on cabinet doors and drawers. With an overall length of 4-1/8 inch, the pull extends slightly beyond the hole spread, covering the bore area and minor surface marks around previous hardware. The 1-1/4 inch projection locates the gripping surface away from the door face, which is helpful on doors with thicker applied fronts or decorative edge profiles. A width of 1/2 inch keeps the footprint narrow, which is useful on slim drawer fronts or tight rail sections where wider hardware might crowd panel details.
The Hickory Hardware Williamsburg collection is described as a versatile collection offering many possibilities for a home, so this P3051-OBH pull suits a range of cabinet and drawer locations. The easy style is noted as adaptable for cabinets in a multipurpose room, which means it works on utility storage where a straightforward pull is preferred. It is also identified as suitable for storage drawers in a den, so it applies well to built-in cabinetry or furniture-style bases in living spaces. With its oil rubbed bronze highlighted finish, the pull pairs naturally with other bronze-toned hardware, making it appropriate for coordinated cabinet runs in kitchens, dens, or hallways. The 3-3/4 inch center to center size fits cabinets that use this common drilling pattern, which helps when matching existing layouts across multiple doors and drawers in the same room. The zinc construction supports everyday opening and closing of cabinet doors and storage drawers throughout these areas.
The 3-3/4 inch (96 mm) center to center dimension provides a clear drilling reference, so installers can lay out hole locations consistently along a run of doors and drawers. The overall 4-1/8 inch length offers balanced coverage over the bore area, which helps maintain a uniform look even when cabinets vary slightly in rail width. A projection of 1-1/4 inch sets the handhold away from decorative edges, allowing doors with raised or molded details to open without fingers crowding the profile. The 1/2 inch width keeps the pull from overpowering smaller fronts, which is important when repeating the part across narrow drawer banks or tight face-frame sections. The oil rubbed bronze highlighted finish supports consistent color and sheen from piece to piece, so banks of cabinets share the same visual line. Identifying the pull by its manufacturer part number P3051-OBH helps projects stay consistent, because the same part can be specified wherever this style and size are required on the job.
The P3051-OBH pull has a 3-3/4 inch center to center, a 4-1/8 inch overall length, a 1-1/4 inch projection, and a 1/2 inch width, so it fits common cabinet layouts.
The 96 mm center to center matches a standard 3-3/4 inch drilling pattern, allowing the pull to align with many pre-bored cabinet doors and drawers.
The Hickory Hardware Williamsburg pull is made from zinc, giving the handle a solid metal base suitable for repeated cabinet and drawer use.
The oil rubbed bronze highlighted finish provides a dark bronze tone with lighter highlights, helping the pull coordinate with similar bronze cabinet hardware.
The pull is described for cabinets in a multipurpose room and for storage drawers in a den, indicating suitability for various household storage areas.
The P3051-OBH belongs to Hickory Hardware's Williamsburg collection and is listed under the Belwith Keeler brand for decorative handles and pulls.
The Hickory Hardware Williamsburg 3-3/4 inch center to center pull P3051-OBH combines a 96 mm drilling pattern, zinc construction, and an oil rubbed bronze highlighted finish, so it fits standard cabinet layouts while supporting a coordinated, traditional look. The defined dimensions of 4-1/8 inch length, 1-1/4 inch projection, and 1/2 inch width give clear layout information for doors and drawers across multipurpose rooms, dens, and other storage areas. For projects that call for a straightforward, adaptable cabinet handle from a consistent collection, this Williamsburg pull offers a practical, repeatable choice.