Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Williamsburg cup pull is a zinc cabinet handle from the Williamsburg collection in an oil rubbed bronze finish, so it delivers a specific traditional look while using a sturdy base metal that suits everyday cabinet use. The pull is identified as Belwith Keeler manufacturer part P3055-10B, which ties it directly to a known decorative hardware line that installers and shops can match across multiple jobs or repeat orders. The 3 inch (76 mm) center to center drilling defines the hole spacing, so it fits layouts designed around this common cabinet pull standard. Overall length of 3-7/16 inch sets the footprint across the drawer or door front, which helps with proportion on smaller to mid-size faces. A 1 inch projection sets how far it stands off the surface, supporting a comfortable hand grip without reaching too far into the room. The 1-11/16 inch width determines coverage from top to bottom on the mounting area.
This cabinet cup pull uses a 3 inch (76 mm) center to center measurement, which sets the exact distance between mounting holes that must be drilled or already present in the cabinet front. With an overall length of 3-7/16 inch, the pull extends slightly beyond the hole centers on each side, so the mounting bores remain concealed once installed. The 1-11/16 inch width defines how much vertical space on the drawer or door face is visually occupied, which helps align the pull within rail heights or drawer fronts. The 1 inch projection determines the stand-off from the surface, so fingers can reach behind the cup edge while the handle remains close enough for tight kitchen or bath layouts.
This Hickory Hardware Williamsburg cup pull is part of the Williamsburg collection, so it fits projects that already use or plan to use Williamsburg cabinet hardware for a consistent style. The 3 inch (76 mm) center to center hole spacing suits cabinet and drawer fronts laid out for this common drilling, so it works on many standard-size residential fronts that follow this pattern. With an overall length of 3-7/16 inch, the pull scales well on smaller and mid-sized drawers or doors where a compact footprint is preferred. The 1-11/16 inch width keeps the cup within typical rail or drawer heights, which helps align it neatly between edges without crowding surrounding profiles. The oil rubbed bronze finish supports use on projects calling for a darker, traditional look, tying into other oil rubbed bronze decorative elements on the same job. Construction in zinc gives the pull a defined weight and feel that suits routine cabinet use in kitchens, baths, and storage areas.
The 3 inch center to center measurement on this P3055-10B cup pull standardizes mounting, which helps installers repeat the same boring pattern across multiple cabinets or match existing 3 inch layouts during replacements. Overall length of 3-7/16 inch gives a predictable edge-to-edge dimension, aiding in setting consistent end clearances from door or drawer sides during layout. The 1-11/16 inch width controls how much of the stile or drawer face is covered, which supports alignment with rails or centerlines in a run of cabinets. A 1 inch projection defines how far the grip area stands off the surface, providing a repeatable handfeel from cabinet to cabinet on the same project. The oil rubbed bronze finish keeps the visual tone consistent across all P3055-10B pulls used, which matters when lining them up in rows on banks of drawers or doors. Being identified as a Belwith Keeler product under the Hickory Hardware name and Williamsburg collection helps shops specify the same pull in schedules and reorders for future work.
The P3055-10B cup pull uses a 3 inch (76 mm) center to center measurement, which sets drilling distance for cabinet fronts and aligns with many existing 3 inch layouts.
The cup pull measures 3-7/16 inch in overall length, 1-11/16 inch in width, and projects 1 inch, defining its footprint and hand clearance on drawers and doors.
The Williamsburg collection cup pull is made from zinc, giving the handle a solid metal body suitable for routine cabinet opening and closing.
The P3055-10B cabinet cup pull has an oil rubbed bronze finish, providing a dark, traditional appearance that coordinates with similar bronze hardware.
This 3 inch cup pull is a Belwith Keeler product under the Hickory Hardware name from the Williamsburg collection, so it matches other Williamsburg decorative hardware pieces.
This pull belongs to the Decorative Hardware and Moldings, Handles and Pulls category, placing it among cabinet handles used for doors and drawers.
The Hickory Hardware Williamsburg cup pull with 3 inch center to center drilling, 3-7/16 inch overall length, and 1 inch projection offers defined dimensions for planned layouts and replacements. The oil rubbed bronze finish and zinc construction support a traditional look with a metal body suited to everyday cabinet use. For projects built around the Williamsburg collection or requiring consistent 3 inch spacing, the Belwith Keeler P3055-10B part number gives a clear way to specify and repeat this pull across jobs.
Sold In: 1 Each