Hickory Hardware Williamsburg pull gives you a 3 inch center to center grip that lines up with standard cabinet and drawer drilling, so replacements or new layouts follow a familiar measurement on shop drawings and templates. The pull uses zinc material, which creates a solid-feeling handle during daily use while keeping weight reasonable on cabinet fronts. Its vintage bronze finish provides a darker, traditional look that blends with many wood tones, supporting consistent appearance across banks of doors and drawers. Overall length of 3-3/8 inch keeps the pull compact, so it fits smaller fronts while still offering finger clearance. A projection of 1-1/4 inch moves your hand away from the face, which helps avoid knuckle contact on deeper rails and stiles. Width of 1/2 inch gives a narrow profile that sits neatly on face frames and flat-panel fronts.
The 3 inch center to center measurement defines the mounting hole spacing, so drilling or reusing holes can follow a simple straight-line dimension. With a projection of 1-1/4 inch, the pull extends out far enough from the door or drawer face to clear typical finger thickness, which matters on heavier fronts. The 3-3/8 inch overall length gives enough span between posts to spread load when opening wider drawers, while still fitting rail sections on smaller cabinet doors. A width of 1/2 inch concentrates the pull visually on the front, which helps when laying out multiple handles close together on stacked drawer banks. The vintage bronze finish stays visually consistent with other vintage bronze decorative hardware in the same area.
The 3 inch center to center pull layout suits common cabinet and drawer fronts in kitchens, dens, and multipurpose rooms, because many drilling jigs and shop patterns are based on this spacing. At 3-3/8 inch overall length, the Hickory Hardware Williamsburg pull works on both narrow utility drawers and wider fronts, keeping the hardware in scale while still offering enough grip span. The vintage bronze finish supports projects that call for a traditional or warm metal tone, matching other vintage bronze pieces in the same space. With a 1-1/4 inch projection, this cabinet and drawer pull 3 inch design gives adequate clearance where fronts sit near face frames, end panels, or adjacent cabinets, reducing finger squeeze in tight reveals and making repeated use more comfortable.
The Hickory Hardware Williamsburg pull belongs to the Williamsburg collection, so the vintage bronze finish and shaping stay consistent across matching hardware, which keeps banks of doors and drawers visually aligned. The zinc construction provides a solid base for the finish and a firm feel when pulling heavier drawers, supporting regular operation in storage areas and dens. A 1/2 inch width keeps the footprint modest on the door or drawer face, which is helpful when laying out multiple pulls on small fronts or when working close to decorative edge profiles. The defined 3 inch center to center spacing simplifies repeating measurements along a run, which speeds production work and helps limit layout errors. Manufacturer part number P3050-VB clearly identifies this specific combination of style, size, and vintage bronze finish when ordering or matching existing hardware in the field.
The Hickory Hardware Williamsburg pull P3050-VB has a 3 inch center to center, 3-3/8 inch overall length, 1-1/4 inch projection, and 1/2 inch width, giving a compact but usable grip area.
The 3 inch center to center spacing matches a common boring standard, so drilling jigs and templates often align directly, speeding both new installs and change-outs.
The P3050-VB pull uses zinc material, providing a solid base for the vintage bronze finish and a sturdy feel when operating cabinet doors and drawers.
The 1-1/4 inch projection indicates how far the pull stands off the front, creating finger clearance that helps avoid knuckle contact during regular opening and closing.
The vintage bronze finish matches other vintage bronze decorative hardware, supporting a consistent look across cabinets, drawers, and nearby fittings in the same room.
The 1/2 inch width keeps the pull visually narrow, which helps it sit neatly on smaller rails and flat fronts without crowding profiles or adjacent hardware lines.
The Hickory Hardware Williamsburg pull P3050-VB combines a 3 inch center to center layout, 3-3/8 inch overall length, and vintage bronze finish, giving a compact, traditional option for doors and drawers. At Wurth Baer Supply, this cabinet and drawer pull 3 inch style fits projects calling for zinc construction and a consistent vintage bronze appearance across multiple fronts.