Hickory Hardware Williamsburg cup pull gives cabinets and drawers a simple, traditional grip that fits a wide range of residential projects. This Belwith Keeler pull is part of the Williamsburg collection, so its styling stays consistent wherever it is used in a room. The pull is made from zinc, which provides a sturdy metal body for everyday cabinet and drawer operation. A vintage bronze finish covers the zinc construction, creating a darker, classic look that pairs well with many wood tones. The center to center mounting dimension is 3 inches, which fits standard 3 inch bored hole layouts on doors and drawers. Overall length is 3-7/16 inches, so the pull slightly overhangs the boring pattern and visually fills most rail widths used on typical cabinet faces. Projection is 1 inch from the mounting surface, giving fingers room to grab while keeping the profile close to the front. Width is 1-11/16 inches, offering a comfortable hand contact area for regular use.
This cup pull uses a 3 inch center to center spacing, so mounting holes are set 3 inches apart across the cabinet or drawer front. The 3-7/16 inch overall length means each end of the pull extends beyond the holes, giving some forgiveness when aligning to rail edges. With a 1 inch projection, the pull stands just far enough off the surface for a comfortable grip without interfering with adjacent doors in a run of cabinets. The 1-11/16 inch width defines how much vertical space the pull occupies, which helps plan placement on narrow rails or smaller drawer fronts. These fixed dimensions give a clear layout reference when marking boring locations or planning replacements that must match an existing 3 inch pattern.
This Williamsburg collection cup pull is designed for cabinets and storage drawers where a 3 inch center to center mounting pattern is preferred. The 3 inch spacing works well on kitchen and bath drawer fronts that already follow this common standard, allowing a direct swap from older pulls with the same measurement. The 3-7/16 inch overall length suits medium-width drawer rails, so the pull does not look undersized or oversized on typical face frame designs. With a width of 1-11/16 inches, the pull sits comfortably on rails that offer enough height to show the full bronze cup profile. The vintage bronze finish supports projects that lean toward traditional, transitional, or warm-toned schemes, especially when matched with similar bronze hinges or knobs from the same general style family. Because the pull is made of zinc, it fits well into everyday residential rooms such as dens, multipurpose rooms, or storage spaces that see steady use.
The fixed 3 inch center to center drilling dimension allows predictable layout work, so installers can bore multiple fronts with the same jig setup and maintain consistent alignment from cabinet to cabinet. The slightly longer 3-7/16 inch body gives some visual coverage around the holes, which helps minor drilling variations appear balanced once the cup pull is mounted. A projection of 1 inch controls how far the hand must reach beyond the cabinet face, supporting tight runs of cabinets where deeper hardware might clash or feel bulky. The 1-11/16 inch width keeps the pull profile readable without overwhelming narrower drawer fronts, which supports a uniform look in banks that mix shallow and deeper drawers. Zinc construction provides a solid base for the vintage bronze finish, so the pull keeps the same material feel across a full room installation. Tying into the Williamsburg collection keeps the style language consistent from one cabinet area to the next, helping larger projects look planned and coordinated.
The Hickory Hardware Williamsburg cup pull uses a 3 inch center to center mounting dimension, which matches a common drilling pattern for cabinet doors and drawers.
The P3055-VB cup pull has an overall length of 3-7/16 inches, so it extends slightly beyond the 3 inch mounting holes for full coverage and balanced appearance.
This Belwith Keeler cup pull projects 1 inch from the cabinet surface, providing finger clearance while keeping the hardware profile close to doors and drawers.
The cup pull has a width of 1-11/16 inches, giving a taller gripping surface that works well on standard cabinet rails and most drawer fronts.
The Williamsburg collection cup pull is made from zinc with a vintage bronze finish, combining a solid metal body with a traditional dark-toned appearance.
The manufacturer part number is P3055-VB, which identifies this specific 3 inch center to center vintage bronze cup pull in the Williamsburg collection.
The Hickory Hardware Williamsburg cup pull in vintage bronze offers a 3 inch center to center layout, 3-7/16 inch overall length, 1 inch projection, and 1-11/16 inch width, giving clear dimensional data for planning cabinet and drawer hardware runs. The zinc construction and vintage bronze finish support projects targeting a traditional look with consistent metal hardware across the space. For jobs laid out around a 3 inch boring pattern, this P3055-VB cup pull provides a straightforward match that ties style, size, and function into one part number ready to specify.