Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Williamsburg pull is a zinc cabinet pull from the Williamsburg collection that gives cabinets and drawers a consistent look across a room. The Black Nickel Vibed finish provides a dark, reflective surface that suits projects needing a modern but understated style. The pull is identified as Belwith Keeler manufacturer part P3051-BNV, so it can be matched to existing layouts that already use this part number. With a length of 4-1/8 inches, the pull spans enough cabinet rail or drawer front to feel substantial in the hand while still fitting typical residential faces. The design is part of a versatile collection described for multipurpose rooms and storage drawers, which supports use across dens, work areas, and general cabinetry where one style is preferred throughout the space.
The 96 mm center to center mounting dimension defines where the two fastener points sit, which helps when laying out drilling jigs for repeat cabinet runs. The pull is described as 3-3/4 inches center to center, so it matches installers working in either metric or inch measurements during planning. With an overall length of 4-1/8 inches, the pull slightly overhangs the mounting span at each end, creating a clear visual reference when centering it on rails or drawer fronts. The 1-1/4 inch projection sets the stand-off distance from the door or drawer, which is important where doors open near walls or tall end panels. The 1/2 inch width keeps the contact area slim, allowing use on narrow frames or shallow top rails without crowding other hardware on the face.
The 96 mm center to center pull works well on cabinet doors and drawers that already follow the common 3-3/4 inch boring pattern, helping maintain alignment when updating hardware. The pull is part of Hickory Hardware's Williamsburg collection, which is described as versatile for multipurpose rooms and storage drawers, so it suits utility spaces, dens, and general storage cabinetry using one style across different cabinet sizes. The Black Nickel Vibed finish supports projects targeting a dark, polished appearance that coordinates with similar metal tones across a room. With a 4-1/8 inch overall length, this pull fits comfortably on standard kitchen or office drawer fronts where a mid-length grip is preferred, and it does not dominate smaller fronts. The 1/2 inch width allows installation on narrower stiles or rail sections, making it suitable when working around panel profiles or decorative edge details.
The 96 mm center to center dimension and the matching 3-3/4 inch reference give clear measurements in both metric and imperial units, which simplifies jig setup and repeat drilling when working through multiple cabinet fronts. The 1-1/4 inch projection creates a predictable clearance from the cabinet face, so adjacent doors and drawer fronts keep a consistent gap between the hardware and surrounding surfaces. The zinc construction provides a solid base for the Black Nickel Vibed finish, supporting a uniform look when the same pull is used across long cabinet runs or full banks of drawers. The defined 4-1/8 inch length lets installers align the pull precisely with panel widths or stile edges, which supports straight sight lines across upper and lower cabinets. Being listed under manufacturer part number P3051-BNV helps match previous orders or expand existing installations, so replacements or additions align with the original hardware choice.
The P3051-BNV pull uses a 96 mm, or 3-3/4 inch, center to center mounting span, so hole locations follow this spacing when drilling new cabinet doors or drawers.
The Hickory Hardware Williamsburg pull is 4-1/8 inches long overall, which provides a mid-length grip suited to typical cabinet doors and drawer fronts.
The P3051-BNV cabinet pull has a 1-1/4 inch projection, giving space for fingers to wrap behind the pull while keeping it close to the cabinet face.
This 3-3/4 inch cabinet pull is made from zinc, providing a stable base for the Black Nickel Vibed finish across multiple matching pulls.
The P3051-BNV cabinet pull uses a Black Nickel Vibed finish, giving a dark metallic look that coordinates with similar modern cabinet hardware.
This Hickory Hardware pull belongs to the Williamsburg collection, described as versatile for multipurpose rooms and storage drawers throughout the home.
The Hickory Hardware Williamsburg pull with 96 mm center to center spacing, 4-1/8 inch length, and 1-1/4 inch projection delivers known dimensions that help plan drilling and layout. The Black Nickel Vibed finish on a zinc body supports a consistent appearance across doors and drawers. With a design described for multipurpose rooms and storage drawers, this P3051-BNV pull suits projects that need the same hardware style across cabinets in dens, workrooms, or general living spaces. Choose it when a 3-3/4 inch boring pattern, mid-length grip, and dark nickel tone match your cabinet run.