Hickory Hardware Natural Woodcraft pull is a 3 inch center to center unfinished wood pull designed for cabinet and furniture projects where a specific finish match matters. The pull uses natural wood material, so the surface accepts a wide range of stains or clear finishes for visual alignment with doors or drawer fronts. An unfinished wood finish gives you full control over color and sheen, which supports consistent appearance across new builds and refacing work. The handle length of 3-5/8 inches provides a practical gripping area beyond the 3 inch drilling pattern, helping hands find the pull comfortably on narrow drawer fronts or cabinet rails. A projection of 1-1/4 inches spaces fingers away from the face, which helps reduce knuckle contact on thicker fronts. The 11/16 inch width presents a modest profile that works on both small and mid-size fronts without crowding tight layouts.
This Belwith Keeler wood pull uses a 3 inch center to center drilling distance, which coordinates with a straightforward two-hole layout on cabinet doors and drawers. The defined center spacing supports direct use on new panels pre-drilled for 3 inch pulls or on existing fronts already laid out with that pattern. Overall length of 3-5/8 inches means the handle extends slightly past the mounting holes, which helps cover minor edge chipping around the bore area. A 1-1/4 inch projection establishes how far the pull sits off the surface, influencing knuckle clearance when operating doors at different angles. The 11/16 inch width defines the face of the pull, which affects both hand feel and how the piece lines up visually on rails and stiles.
The P673-UW unfinished wood pull fits cabinet and furniture applications that benefit from a custom finish, such as kitchens, baths, built-ins, and shop storage. Its Natural Woodcraft collection design focuses on an unfinished surface, so the pull takes on the same stain schedule as doors, drawer fronts, and face frames. A 3 inch center to center mount ties into a common drilling standard, allowing use across runs of cabinet doors or banks of drawers that share that spacing. Length of 3-5/8 inches lets the pull sit comfortably on standard drawer fronts without overwhelming the panel, while still offering enough presence on taller doors. The 1-1/4 inch projection supports hand clearance in tight alcoves, such as between appliances or near walls, by holding the grip area forward from the face. Width of 11/16 inch suits narrower rails or smaller fronts found on bathroom vanities and utility cabinets. As part of a Belwith Keeler decorative hardware group, this pull fits into a broader selection strategy for wood-based projects where the hardware finish is applied on site.
The unfinished wood material on the Hickory Hardware Natural Woodcraft pull acts as a blank surface, so the same stain or clear coat used on the casework can be carried onto the handle for color harmony. The 3 inch center to center measurement gives installers and fabricators a fixed layout point when drilling multiple doors or drawer fronts, which helps maintain straight lines across long cabinet runs. An overall length of 3-5/8 inches provides a bit of tolerance when aligning to rail edges, helping achieve consistent reveal distances from stile or drawer edges along a run. The 1-1/4 inch projection defines a repeatable stand-off from the surface, so doors can be opened with a similar hand motion across the installation. The 11/16 inch width keeps the visible footprint compact, which is useful when repeating the same pull on narrow drawers stacked vertically. Identifying the pull by manufacturer part number P673-UW supports ordering the same component again, keeping hardware identical on future additions or replacements.
The Hickory Hardware Natural Woodcraft pull has a 3 inch center to center measurement, setting the hole spacing for mounting on cabinet doors or drawers.
The P673-UW unfinished wood pull has an overall length of 3-5/8 inches, providing extra grip area beyond the 3 inch mounting holes for comfortable use.
This Belwith Keeler wood cabinet pull projects 1-1/4 inches from the mounting surface, creating finger clearance when opening cabinet doors or drawers.
The Natural Woodcraft series pull has a width of 11/16 inch, giving a modest profile that suits smaller fronts while still providing a usable gripping surface.
The P673-UW pull uses wood material with an unfinished wood finish, allowing user-applied stain or topcoat to match surrounding cabinetry or furniture.
This 3 inch center to center pull is part of Hickory Hardware's Natural Woodcraft collection and is produced under the Belwith Keeler brand.
The Hickory Hardware Natural Woodcraft pull combines a 3 inch center to center layout with wood construction and an unfinished surface, aligning with projects that demand a site-applied finish. The 3-5/8 inch overall length, 1-1/4 inch projection, and 11/16 inch width create a balanced size that works across doors and drawers. Identified as Belwith Keeler part P673-UW, this pull can be specified consistently wherever an unfinished wood handle is required throughout a cabinet, furniture, or storage installation.
Sold In: 1 Each
