Hickory Hardware Woodgrain Series 3" (76 mm) Center to Center Unfinished Wood Pull, - P794-OAK

Hickory Hardware Woodgrain 3 Inch Pull For Wood Tones

Hickory Hardware Woodgrain 3 inch pull is a 3 inch center to center unfinished wood cabinet pull in the Woodgrain collection. This design works with wood floors or cabinets because the material and oak finish visually tie into existing wood tones. The pull uses various materials with an oak finish, so it offers a wood look while using metal edging for added strength at the edges. The finished metal edging adds ornamental detail around the wood section, which creates a defined outline on cabinet faces. With a length of 5 inches, this pull provides enough hand contact for comfortable gripping on drawers and doors. The 1-3/16 inch projection sets the gripping surface off the cabinet face at a practical distance, which helps users open doors and drawers without scraping knuckles.

Key Woodgrain Pull Details That Support Your Project

• The 3 inch center to center drilling matches common cabinet layouts, which helps align this pull to many existing 3 inch hole patterns in cabinet doors and drawers.
• The Woodgrain collection design focuses on wood tones, so this pull can visually connect with wood floors or cabinets where a coordinated look is important.
• The use of various materials with an oak finish gives a wood appearance while leveraging the structure of mixed materials to support regular cabinet use.
• The finished metal edging frames the pull on the cabinet front, which adds ornamental interest and defines the transition between hardware and door surface.
• The 5 inch overall length gives more finger space around the 3 inch mounting span, which can improve everyday grip on wider drawer fronts or doors.
• The 1-3/16 inch projection and 3/4 inch width create a handhold that stands away from the cabinet face, helping users grasp the pull securely from different angles.

3 Inch Center To Center Pull Fit And Layout

This 3 inch center to center wood pull is sized around a common drilling layout, which supports straightforward placement on many standard cabinet doors and drawers. The 3 inch span between mounting points defines where the holes align across the cabinet front, so installers can map this measurement to existing or planned drilling. A 5 inch overall length extends beyond the hole centers, which gives visual presence on wider rails and drawer fronts. The 3/4 inch width offers a narrow front profile, allowing this pull to sit comfortably on smaller doors without crowding adjacent edges. With a 1-3/16 inch projection, the working grip plane sits forward of the cabinet surface at a functional distance that supports hand clearance.

Using The P794-OAK Woodgrain Pull In Real Projects

Where This Oak Finish Woodgrain Pull Works Best

The P794-OAK unfinished wood pull from the Woodgrain collection is suited to cabinets where wood tones are already present, because the oak finish echoes surrounding wood floors or cabinet faces. In kitchens or built-ins using wood door styles, this pull can act as a visual bridge between decorative hardware and the natural grain of the cabinetry. The decorative metal edging frames the wood center section, which creates a defined border on slab or recessed-panel doors. On drawer banks, the 5 inch length spreads the pull across more of the drawer front, which can balance the hardware field on medium-width drawers. The 3 inch center to center spacing keeps hole locations consistent across a run of cabinets, supporting aligned sightlines on wall and base cabinets.

Why These Dimensions Support Consistent Results

The 3 inch center to center measurement gives a fixed reference point for drilling, which helps installers repeat the same layout across multiple doors and drawers without recalculating spacing for each opening. By combining that 3 inch mounting span with a 5 inch overall length, this pull presents a proportion where the visible hardware extends beyond the fastener line, which can improve the visual weight on larger faces. The 3/4 inch width keeps the front profile relatively slim, allowing closer placement near door frame edges or on narrower drawer rails while maintaining clearance between adjacent pulls. A 1-3/16 inch projection pushes the gripping surface out from the door, which creates a predictable clearance zone behind the pull for fingers and helps maintain comfortable operation over time in everyday cabinet use.

Common Questions About This 3 Inch Oak Pull

Selecting The P794-OAK Pull For Wood Cabinets

The P794-OAK unfinished wood pull provides a 3 inch center to center layout, a 5 inch length, and a 1-3/16 inch projection, giving installers defined working dimensions for cabinet drilling and grip. The oak finish and Woodgrain collection styling visually coordinate with wood floors and cabinets, while the finished metal edging supplies ornamental definition on the door face. For projects calling for a 3 inch center to center wood-look pull that supports consistent layouts and wood-tone design, this Hickory Hardware Woodgrain option fits directly into that role.