Hickory Hardware Kite Pull 3" (76 mm) Center to Center, Vintage Bronze, P3591-VB

Hickory Hardware Kite Pull For Cabinet Projects

Hickory Hardware Kite Series 3 inch pull gives cabinets and drawers a distinct look using its Kite collection design, which matters when coordinating decorative hardware across a room. The pull uses a 3 inch center to center mounting, so it fits layouts drilled for that common spacing. Made from zinc, the pull offers a solid feel that supports regular cabinet and drawer use in woodworking projects. The vintage bronze finish provides a warm, classic tone that helps tie together other bronze-finished components in the space. With an overall length of 5 inches, the pull spans more of the drawer or door face, which can visually balance wider fronts. A projection of 1 inch sets the gripping surface off the face enough to grasp comfortably during everyday operation. The 3/4 inch width creates a defined edge, which can help alignment by clearly showing the pull orientation during installation.

Key Kite Collection Details For Cabinet Work

• The 3 inch center to center dimension matches many pre-drilled cabinet and drawer layouts, which simplifies replacement work on existing fronts using the same hole spacing.
• The 5 inch overall length stretches beyond the mounting points, giving the pull more visual presence that can help align multiple pulls in a straight run across upper or lower cabinets.
• The 1 inch projection spaces the grip away from the surface, which supports finger clearance when opening heavier drawers or thicker cabinet doors.
• The 3/4 inch width provides a defined, narrow profile, which helps when laying out hardware close to panel edges or decorative trim details.
• The vintage bronze finish coordinates with other bronze-toned hardware, helping maintain a consistent appearance throughout kitchens, baths, or built-ins.
• The zinc material gives the pull a sturdy construction, which supports repeated use on frequently opened cabinet doors and drawers.

Mounting And Fit Details For This 3 Inch Pull

This 3 inch center to center cabinet pull installs on doors or drawers bored for that spacing, so it integrates into standard two-hole layouts common in many woodworking projects. The 5 inch length leaves material beyond the mounting points, which can help cover minor blemishes around existing holes during a refresh. With a 1 inch projection, the pull stands off the surface at a distance suited to gripping while still keeping hardware close to the face, which matters when doors swing near walls or adjacent fronts. The 3/4 inch width keeps the pull compact across the grain, which can be useful on narrow rails where wider hardware could crowd the panel. The vintage bronze finish and Kite collection design allow consistent hardware selection across multiple cabinet banks where the same series is desired.

Using The Kite Pull In Cabinet Layouts

Where This Hickory Hardware Pull Fits Best

This Hickory Hardware Kite Series 3 inch pull works on cabinet doors and drawers drilled on a 3 inch center to center pattern, which covers many kitchen, bath, and furniture applications. The 5 inch length helps it sit proportionally on medium-width drawer fronts or door rails, giving enough span to look intentional without dominating the panel. Its 1 inch projection supports hand clearance, which matters on doors with thicker edge profiles or overlay styles. The 3/4 inch width lets it sit cleanly on narrow frame members, so it can be used on smaller doors where larger pulls may not fit visually. The vintage bronze finish aligns with traditional and transitional cabinet styles, tying into other bronze-finished hinges or decorative moldings in the same project.

Details That Support Consistent Hardware Results

The defined 3 inch center to center measurement provides a repeatable drilling pattern, which supports consistent alignment when laying out rows of pulls across multiple doors and drawers. Because the pull length is 5 inches, installers gain some forgiveness when positioning over minor variances in hole placement, helping maintain a straight visual line. The 1 inch projection creates a fixed stand-off that can be used as a reference when checking door swing clearances near walls or appliance panels. Its 3/4 inch width gives a predictable edge distance from stile or rail borders, which helps keep hardware centered on narrow frames. The zinc construction and Kite collection geometry combine into a single style choice, which simplifies specifying the same pull across an entire job from Wurth Baer Supply.

Common Questions About The P3591-VB Cabinet Pull

Select This Kite Pull For 3 Inch Layouts

The Hickory Hardware Kite Series 3 inch pull in vintage bronze provides a defined 3 inch center to center pattern, 5 inch length, 1 inch projection, and 3/4 inch width, giving clear layout points for cabinet work. The zinc material and Kite collection styling from Belwith Keeler support consistent hardware selection across multiple fronts. For projects using 3 inch hole spacing and a vintage bronze finish from Wurth Baer Supply, this P3591-VB pull provides a matched solution.