Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Arc Series 3 inch pull is a zinc cabinet handle in the Arc collection with a vintage bronze finish, so it brings a contemporary slight arc shape with a warm tone suitable for many cabinet and drawer fronts. The pull has a 3 inch center to center hole spacing, which positions mounting holes on standard 3 inch layouts often used in kitchen, bath, and shop casework. Its overall length of 3-3/8 inch gives a little extension beyond the hole spacing, creating a balanced look on doors and drawers. A projection of 1 inch sets the gripping surface off the cabinet face, giving fingers room to grab while keeping the pull close enough to reduce snagging. The 7/16 inch width creates a slim profile across the front, which helps the pull read as a clean line on narrow rails and smaller drawers.
The 3 inch center to center measurement defines how this pull mounts, so existing 3 inch hole patterns on cabinets or drawers can match without changing drilling. With a 3-3/8 inch overall length, the pull spans slightly beyond the hole spacing, which helps it sit proportionally on face frames, slab doors, and drawer fronts using that pattern. The 1 inch projection from the cabinet face sets the working clearance, so hands engage the pull without the front edge digging into fingers. At 7/16 inch width, the pull presents a narrow front profile, which can sit comfortably on thinner rails or smaller drawer fronts without crowding decorative edges or adjacent hardware.
This Belwith Keeler P3595-VB pull, from the Hickory Hardware Arc collection, suits cabinet and drawer applications that use the 3 inch center to center drilling standard, because its mounting layout matches that spacing. The 3-3/8 inch overall length works well on many common cabinet door styles and small to mid-size drawers, giving enough visual presence without dominating narrow fronts. With a 1 inch projection, the pull creates usable finger clearance on both face-frame and frameless cabinets, providing a practical grip point on doors that see frequent opening. The 7/16 inch width supports use on tight rails or compact drawer heads, since the pull stays inside many edge profiles and leaves room near neighboring hardware. Its vintage bronze finish adds a darker metal tone, positioning it for cabinets where a warm, subdued metal color is desired on casework in shops, kitchens, or offices.
The defined 3 inch center to center spacing on this Arc Series pull supports repeatable drilling when using templates or boring equipment, reducing layout variation across long cabinet runs. The 3-3/8 inch overall length helps installers line pulls at consistent offsets from door and drawer edges, which can standardize visual alignment from cabinet to cabinet. With a 1 inch projection, the grip depth stays the same on every door and drawer using this model, so users experience uniform handling across the installation. The 7/16 inch width keeps the pull slim, which can simplify placement when aligning multiple pulls horizontally on banks of drawers. Being part of the Arc collection, the slight arc shape offers a recurring design line, helping designers and installers carry the same profile across base, wall, and tall cabinets without switching styles.
The P3595-VB pull uses a 3 inch center to center dimension, which matches many standard cabinet drilling patterns and can streamline layout or replacement on existing fronts.
The pull has a 3-3/8 inch overall length, so it slightly overhangs the mounting holes and gives a balanced look on typical cabinet doors and smaller drawers.
The P3595-VB pull projects 1 inch from the cabinet face, creating finger clearance while keeping the hardware close to the door or drawer front.
This Belwith Keeler 3 inch pull is 7/16 inch wide, giving a slim front profile that works well on narrow rails and compact drawer heads.
The pull is made of zinc, providing a metal construction that offers a solid feel when opening cabinet doors or drawers.
The P3595-VB pull has a vintage bronze finish, giving a darker, warm metal tone that can coordinate with many wood finishes and stains.
This 3 inch pull from the Hickory Hardware Arc collection combines a 3 inch center to center layout, 3-3/8 inch length, 1 inch projection, and 7/16 inch width in a vintage bronze zinc construction. Those defined dimensions and finish let you match existing 3 inch drilling, keep a consistent arc profile across doors and drawers, and set a warm metal accent on cabinets. For cabinet, drawer, or casework projects that call for this specific P3595-VB layout and appearance, this pull is ready to put into your next run.
Sold In: 1 Each