Hickory Hardware Luna 3" (76 mm) Center to Center Satin Nickel Pull, P3448-SN

Hickory Hardware Luna 3 Inch Pull For Cabinets

Hickory Hardware Luna 3 inch pull provides a 3 inch center to center mounting layout, which aligns with common drilling patterns so cabinet and drawer fronts can be updated or matched without layout changes. The pull has a satin nickel finish, giving a consistent, modern look that coordinates with other satin nickel components on the same run of cabinets. Its circular curves are inspired by the nocturnal beauty of the moon, creating a rounded profile that softens straight cabinet lines and supports creative design options on doors and drawers. The pull length of 4-1/8 inch spans the hand grip area, providing a comfortable grab across standard cabinet rail widths. A projection of 1 inch stands the pull off the surface, creating finger clearance that helps users open doors and drawers easily. The 9/16 inch width presents a slim front view, which keeps the hardware visually light on both small and large faces.

Key Luna Collection Pull Details For Projects

• The Luna collection design imitates the shape of the moon, which gives cabinets and drawers a light and airy feel that works well where a softer visual is needed across multiple fronts.
• Material is zinc, which provides a solid metal pull body that feels substantial in hand while supporting repeated daily use on busy doors and drawers.
• The satin nickel finish offers a uniform, muted sheen that coordinates with other satin nickel components and helps tie mixed cabinet layouts into a single visual line.
• Overall length of 4-1/8 inch gives a generous gripping span, which helps when users are opening wider drawers or heavier fronts in multipurpose rooms.
• Projection of 1 inch sets the pull off the face enough for finger clearance, which aids quick access without contact against the door or drawer surface.
• Width of 9/16 inch keeps the pull visually slim, which helps when lining up multiple pulls across banks of drawers or tall cabinet runs.

Mounting And Fit Details For This Cabinet Pull

This Luna collection cabinet pull uses a 3 inch center to center dimension, which aligns with a widely used mounting standard so existing 3 inch holes on doors and drawers can be reused. The 4-1/8 inch overall length means the pull slightly overhangs the mounting span, giving a balanced look around the screw locations on most face frames or slab fronts. With a 1 inch projection, the pull sits far enough from the surface to allow fingers to wrap behind the grip, which helps when pulling heavier drawers in storage or multipurpose rooms. The 9/16 inch width keeps the pull compact, so it can be positioned near edges or between narrow rails without crowding adjacent details.

Luna Satin Nickel Pull In Real Cabinet Use

Luna Collection Pull On Cabinets And Drawers

The Luna collection by Hickory Hardware is inspired by the nocturnal beauty of the moon, so its circular curves suit cabinet doors and drawers that benefit from softer lines. On a multipurpose room cabinet run, this 4-1/8 inch long pull provides a consistent handhold across different cabinet sizes, aligning the visual line from small upper doors to wider base drawers. The 3 inch center to center layout lets installers or remodelers match existing 3 inch drilling on replacement fronts, which reduces layout changes when refreshing hardware on a full bank. When used on a chest of drawers in a playroom, the 1 inch projection keeps the grip accessible for frequent opening while the 9/16 inch width maintains a refined, not bulky, appearance on smaller drawer faces.

Dimensions And Finish Supporting Repeatable Results

The 3 inch center to center cabinet pull spacing gives a predictable mounting reference, so drilling jigs or templates set for 3 inch spacing can be used repeatedly across a project without recalibration. The 4-1/8 inch length creates a slight overhang beyond the screw points, which visually centers the pull on most rails and panels and helps keep alignment consistent from door to door. A projection of 1 inch creates reliable finger space that feels similar across all installations using this model, so users experience the same pull distance from wall cabinets down to base units. The satin nickel finish maintains a consistent tone from pull to pull, which supports projects where multiple P3448-SN satin nickel pull units are installed in the same room and must read as one coordinated hardware line.

Common Questions About The Luna Cabinet Pull

Select The Right Luna Pull For Your Cabinet Run

The P3448-SN satin nickel pull combines a 3 inch center to center layout, 4-1/8 inch length, and 1 inch projection, which supports consistent mounting and comfortable grip on cabinet doors and drawers. Using this zinc Luna collection pull across multipurpose rooms or playroom drawer banks keeps dimensions and finish uniform from piece to piece. For projects that call for a light and airy look with circular curves inspired by the moon, this Hickory Hardware Luna 3 inch pull provides a defined set of measurements and appearance to plan around.